Godox 705-MAGYCX-03 MoveLink Mini Wireless Microphone System Instruction Manual

Godox 705-MAGYCX-03 MoveLink Mini Wireless Microphone System

Specifications:

• Frequency: 2.4GHz
• Channels: Dual-Channel
• Wireless Transmission Distance : Up to 200m
• Sound Quality : Clear and stable with denoise function
• Operation Modes : Mono/Stereo/Safety
• Lowcut Function : Filters noise effectively
• Power Source : TX 5V 80mA, RX 5V 80mA(*2)

Product Usage Instructions

Setup and Connection

Ensure both the transmitter and receiver are fully charged. Turn on both devices and pair them by pressing the Pair Button on the transmitter.

Operation Modes

Switch between Mono, Stereo, and Safety modes using the buttons on the devices to suit your audio recording needs.

Adjusting Settings:

Use the colorful touch screen on the receiver to adjust volume levels, enable silent mode, and configure other settings as required.

Monitoring

Connect headphones to the 3.5mm Earphone Monitoring Port on the receiver for real-time audio monitoring while recording.

Maintenance and Care

Avoid dropping or exposing the devices to extreme conditions. Keep them dry and away from direct sunlight or moisture. Store themin a safe place when not in use.

FAQ

• Q: How do I charge the transmitters?
  • A: Use the provided charging points on the receiver to store and charge two transmitters simultaneously.
• Q: Can I use this product in wet conditions?
  • A: No, it is recommended to avoid using the product in rain or damp environments to prevent damage.
• Q: What should I do if I need repairs?
  • A: If repairs are necessary, send the product to the manufacturer or an authorized maintenance center for service.

Foreword

Thank you for purchasing! Based on the principle of 2.4GHz wireless transmission, Magic XT1 is an innovative and revolutionary microphone system with great strengths and competencies. All those characteristics such as compact and portability, long battery life, receiver workable as a storage & charging case for transmitters, buttons together with colorful touching screen operation, denoise, and lowcut functions, make it suitable for live streaming, outdoor shooting, interviews, short video recordings, etc.

Please read this manual carefully before using to ensure the correct operation and exert the optimum function.

• Main FeatureGlobally universal 2.4GHz wireless transmission technology.
• The maximum wireless transmission distance up to 200m (sight distance).
• Clear and stable sound quality with a denoise function.
• Output volume adjustment and silent function are available.
• Mono/Stereo/Safety mode was freely switchable.
• The lowcut function effectively filters noise.
• Buttons and colorful touching screen operation.
• A receiver can store and charge two transmitters.

Warning

This product is a high-precision instrument, please avoid falling, collision or pounding.
Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center. Always keep this product dry. Do not use in rain or damp conditions.
Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid or dusty.

Keep out of reach of children.
Do not use in flammable and explosive environments. Pay attention to the relevant warning signs.
Do not leave or store the product if the ambient temperature reads over 50℃ .

Please read carefully and follow the warnings or instructions provided by the manufacturer.

Structure of Product

Transmitter

1. Mic
2. Power Switch/Denoise/Pair Button
3. Indicator
4. Charging Points
5. Magnetic Back Button

Receiver

1. Display
2. Power Switch Button
3. 3.5mm Audio Output Port
4. 3.5mm Earphone Monitoring Port
5. Down Button
6. Up Button
7. USB-C Port
8. Back Clip
9. Charging Points
10. Detaching Button
11. Charging Slot for Transmitter

Display

1. Sound Track Icon
2. Screen Lock Icon
3. Mute Icon
4. Lowcut Icon
5. Denoise Icon
6. Receiver Battery Level Icon
7. A/B Transmitter Signal Icon
8. A/B Transmitter Battery Level Icon
9. A/B Transmitter Volume Icon

What’s in the Box

Note : Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only, products to prevail in kind.

Using Instructions

Transmitter

Power Switch/Denoise/Pair Button

Press and hold the button for 3s to turn on or off the transmitter, and short press it to turn on or off the denoise mode. Take the transmitter out of the charging slot of the receiver, it will be automatically turned on. Put the transmitter into the charging slot of the receiver, it will be automatically turned off when fully charged.

Note : Please remove the protective film from the bottom of the transmitter before use, then press and hold the button for 3s to turn it on.

Pairing

Short press the button twice to enter pairing mode, it will exit the pairing state immediately after successfully paired, and exit in 10s after unpaired.

Charging

The transmitter can be charged through its charging points after being put into the charging slot of receiver.

Factory Reset

Press and hold the button for 6s then let go, the transmitter will start factory resetting.

Indicator Instruction

Receiver

Power Switch

Long press the power switch button for 3s to turn on or off the receiver.

Menu Function

In the main interface, short press the power switch button or slide the screen downward to enter the first-level menu interface, short press the up/down button or slide the screen leftward/rightward to switch menu options, then short press the power switch button to enter the second-level menu, or directly click the corresponding icon to operate. Slide the screen upward can return to the previous menu.

DNR < >

In the DNR interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click the screen to select and confirm. The denoise-icon < > will be on the main interface in denoise mode.

Lowcut

In the lowcut interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click  the screen to select and confirm. Press the up/down button at the same time can quickly enter the lowcut interface. The lowcut icon < > will be on the main interface in lowcut mode.

Mute < >

In the mute interface, short press the up/down button to select on or off, then short press the power switch button to confirm, or directly click the screen to select and confirm.

Volume < >

In the volume interface, short press the up/down button or directly click the screen to select A, A/B or B, or long-press the up button for 2s to directly enter A volume adjustment while long press the down button for 2s to directly enter B volume adjustment in the main interface. In the volume adjustment interface, short press the up/down button or directly slide the screen leftward/rightward to adjust the volume, then short press the power switch button to confirm.

Mode

In the mode interface, short press the up/down button or directly click the screen to select track mode (Mono,  Stereo/Safety), then short press the power switch button to confirm. The safety mode is -6dB and only available in mono track.

Note : Using only one transmitter in stereo mode may result in only one channel of sound being recorded, so please choose as needed

Lock

Directly click the icon in the lock interface or short press the power switch button twice in the main interface to lock the screen, short press the power switch button twice again can unlock the screen. Only buttons are available for operation if the screen is locked.

Pair

In pair interface, directly click the screen to select A, B or both, then short press the power switch button or directly click “pair” on the right of the display to start pairing. If successfully paired, it will pop up prompts on the display and then return to the main interface with colorful icons. In the case of unpaired, it will still pop up prompts on the display and then return to the main interface with grey icons.

General

Brightness

In the brightness interface, short press the up/down button or directly slide the screen leftward/rightward to adjust the screen brightness from 0% to 100%, then short press the power switch button to confirm.

Screen Sleep

In the screen sleep interface, short press the up/down button or directly click the screen to select 5min or off.

Language

After the first bootup and the logo appears, it will automatically turn to the language setting interface. Short press the up/down button to select the language, then short press the power switch button to confirm, or directly click the screen to select and confirm the language. During the subsequent use, the user can enter the language menu and reset the language according to the above steps.

Factory Reset

In the factory reset interface, short press the up/down button to select yes or no, then short press the power switch button to confirm, or directly click the screen to select and confirm. Press and hold the up/down button at the same time for 3s in power on status, the screen will display “factory reset” and the receiver will start factory resetting and return to the main interface after resetting.

Version

In the version interface, short press the up/down button or directly slide the screen leftward/rightward to check firmware version and TX version.

Certification

In the certification interface, short press the up/down button or directly slide the screen leftward/rightward to check the certification of the product.

Charging

The receiver can be charged with a power source connected through a USB-C port.

Installing Instruction

1. Absorb the transmitter to the collar with the magnetic back button, or clip it to the collar with a magnetic back clip
2. Insert the receiver into the hotshoe base of the camera through back clip, and connect the 3.5mm audio output port of the receiver to the 3.5mm audio input port of the camera with 3.5mm TRS-TRS connect cable.
3. In case of using with a smartphone, connect the 3.5mm audio output port of the receiver to the USB-C port of the smartphone with 3.5mm TRS to USB Type-C Adapter Cable.
4. If you need to connect to a computer, connect the receiver’s USB-C port to the computer’s port via the USB-A to USB-C cable, and select Magic XT1 for the sound input on the computer to use it.

Note: Since the magnetic back clip is detachable, do not lift it when attaching to heavy objects such as the camera, as the clip may disconnect and the camera will fall.

Technical Data

Specifications and data may be subject to changes without notice.

The above data are derived from the measured value of Godox laboratory and may vary or be inaccurate due to changes in the objective environment.

Maintenance

Avoid falling. Strong collision or vibration may malfunction the device. Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.

Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand.

Keep away from a strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirements.

The device can be used in portable exposure conditions without restriction.

Warning

Operating frequency: 2402MHz – 2480MHz

Maximum EIRP Power : -6.53dBm (TX)/ -5.85dBm (RX)

Declaration of Conformity

GODOX Photo Equipment Co., Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information of DoC, Please click this web link: https://www.godox.com/eu- declaration-of-conformity

The device complies with RF specifications when the device used at 0mm from your body

Marking Information

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Note: This form shall be sealed by the seller.

Applicable Products

Applicable ProductsThe document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached,etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories implemented according to the relevant Product Maintenance Information. The warranty period is calculated from  the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered onthe warranty card when buying the product.

How to Get the Maintenance Service

If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:

① The product or accessory has expired its warranty period; ② Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc; ③ Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment; ④ The original identifying information of product or accessory is modified, alternated, or removed; ⑤ No valid warranty card; ⑥ Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; ⑦ Breakage or damage caused by force majeure or accident; ⑧ Breakage or damage that could not be attributed to the product itself. Once met these situations are met, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information

The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call 0755-29609320-8062

Godox Audio WeChat
Official Account

Overseas Official
Accounts & Updates

GODOX Photo Equipment Co., Ltd.

• Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China
• Tel : +86-755-29609320(8062)
• Fax: +86-755-25723423
• E-mail : godox@godox.com
• 0755-29609320（8062）
• 0755-25723423
• godox@godox.com
• www.godox.com

Made in China

References

• GODOX Photo Equipment Co.,Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>