T G 2A86Y-TG-392 Portable Wireless Bluetooth Speaker User Manual
- June 1, 2024
- T G
Table of Contents
T G 2A86Y-TG-392 Portable Wireless Bluetooth Speaker
Product Information
Specifications
- Compliance: Part 15 of FCC Rules
- Conditions: Must not cause harmful interference, must accept any received interference
Product Usage Instructions
General Guidelines
Follow these guidelines for safe and effective use of the product:
- Ensure compliance with FCC Rules.
- Avoid making any changes or modifications not approved by the responsible party.
- Keep the device away from sources of interference.
Installation
- Place the device in a location with adequate ventilation.
- Connect the necessary cables following the provided instructions.
- Power on the device and wait for initialization.
Operation
- Refer to the user manual for specific operation instructions.
- Monitor the device for any signs of interference or undesired operation.
- Contact customer support for assistance if needed.
FAQ – Frequently Asked Questions
-
Q: What should I do if the device is causing interference?
A: Ensure that the device is placed away from potential sources of interference. If issues persist, contact customer support for further assistance. -
Q: Can I modify the device for better performance?
A: No, any changes or modifications not approved may void your authority to operate the equipment. Contact the responsible party for compliance for any necessary modifications.
TG-392
USER MANUAL
PRODUCT SPECIFICATIONS
- Wireless: V5.3
- Support: L2CAP/ADP/AVCTP, can receive AUDIO signal and control the AUDIO device. Support HSP/HFP(Handsfree profile) with HANDS-FREE functions.
- Working distance:10M
- SNR:≥90db
- Battery: 3.7V 500mAh
- Normal volume playing time: about 2 hours with LED light off
- Speaker driver: ¢45mm*1
- Speaker Power: 42/5W*1
- Frequency response:120Hz-20KHz
- Unit size: 5010072mm
- Unit weight: about 214 g (not includ accessories)
- Charging:5V/500mAh
- Charging time:about 2 H
PRODUCT FEATURE
- international advanced wireless chip and circuit design techniques, support wireless devices.
- With FM function, can search radio station broadcast automatically
- With Hi-Fi speaker, to make sure the clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 1 O meters.
- With AUX line in, can directly connect the outside devices, for example, tablet PC/TV/cell phones.
- lt will close automatically after 30 mins if disconnect Wireless & torchlight not working
- Support TWS.
KEY AND SLOT FUNCTION
- DC SV slot: Use the standard type-c charging cable for power charging.
- TF slot: It can decode and play MP3 format audio when put the USB card into the slot.
- USB slot: It can decode and play MP3 format audio when put the USB card into the slot.
- AUX line in slot: Use the Mini 3.5 head input through outside devices.
- Power switch: Press long for power on /power off.
- [When play music,{LINE IN/ USB card/TF card/ Wireless), short press for “play/pause” .
- Un FM mode, press short to search station automatically, press again to stop searching.
- Under wireless mode with mobile paired, when call coming, press short to answer a call hands-free, press again to hand up, press twice to ring up a call.
- When play music, Press short for last song, long press to turn down the volume.
- When play music, press short for next song, long press to turn up the volume.
- When play music, short press to switch model {TF card/ Wireless/line in/FM).
- TWS: Keep the two speaker under Wireless mode without pairing, press the “M” key for 2-3 seconds either of the speaker until hear a hint, now it is TWS mode . Press the “M” key for 3 seconds either of the speaker to stop TWS after disconnect wireless.
NOTE
- In the FM mode, put in AUX cable to increase the FM radio signal.
- If this speaker crash during use, you can press and hold the power button for 8 seconds to reset and shut down.
- TF Card pis use FAT32 format.
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.