HIKMICRO UD29667B-C Thermal Monocular FALCON Series Telescope User Guide
- June 16, 2024
- HIKMICRO
Table of Contents
HIKMICRO UD29667B-C Thermal Monocular FALCON Series Telescope
Thermal Monocular FALCON Series
Specifications
- Lens Cover : Protects the lens.
- Focus Ring : Adjusts focus to obtain clear targets.
- Buttons : To set functions and parameters.
- Diopter Adjustment Ring : Adjusts the dioptric.
- Eyepiece : The piece placed closest to the eye to view target.
- Battery Compartment : For holding the battery.
- Type-C Interface : To connect the device to power supply or transmit data with a type-C cable.
- Tripod Mount : Connects to the tripod.
Product Usage Instructions
Appearance
The Thermal Monocular FALCON Series has the following features:
- Lens Cover : Protects the lens.
- Focus Ring : Adjusts focus to obtain clear targets.
- Buttons: To set functions and parameters.
- Diopter Adjustment Ring : Adjusts the dioptric.
- Eyepiece : The piece placed closest to the eye to view target.
- Battery Compartment: For holding the battery.
- Type-C Interface : To connect the device to power supply or transmit data with a type-C cable.
- Tripod Mount : Connects to the tripod.
Button Description
The buttons on the Thermal Monocular FALCON Series have the following functions:
- Power Capture : Press to enter standby mode or wake up the device. Hold to power on/off the device. The power indicator stays solid red when the device is on. In non-menu mode, press to capture snapshots and hold to start/stop recording videos.
- Menu Zoom : In menu mode, press to move up. In non-menu mode, press to switch palettes and hold to enter the menu.
Install Battery
To install the battery, follow these steps:
- Open the battery compartment.
- Insert the battery with the correct polarity.
- Close the battery compartment securely.
USB Connection
To connect the device to a power supply or transmit data, follow these steps:
- Turn on the device and lift the type-C interface cover.
- Connect the device and power adapter with a type-C cable to power on the device.
App Connection
To connect the Thermal Monocular FALCON Series to the app, follow these steps:
- Scan the QR code to download and install the app.
- Select “Enable Hotspot” in the device menu.
- Turn on WLAN on your phone and connect to the device hotspot.
- Open the app and connect your phone with the device. You can view the interface of the device on your phone.
More Operations
To learn more about detailed operations, scan the QR code to obtain the user manual.
FAQ
Q: How do I adjust the focus on the Thermal Monocular FALCON Series?
A: Use the focus ring to adjust the focus and obtain clear targets.
Q: How do I capture snapshots or record videos with the Thermal Monocular FALCON Series?
A : In non-menu mode, press the Power Capture button to capture snapshots. Hold the Power Capture button to start/stop recording videos.
Q: How do I connect the Thermal Monocular FALCON Series to the app?
A : Follow the steps provided in the “App Connection” section to connect the device to the app.
Thermal Monocular
Appearance
- Lens Cover : Protects the lens.
- Focus Ring : Adjusts focus to obtain clear targets.
- Buttons: To set functions and parameters.
- Diopter Adjustment Ring : Adjusts the dioptric.
- Eyepiece : The piece placed closest to the eye to view target.
- Battery Compartment : For holding the battery.
- Type-C Interface : To connect the device to power supply or transmit data with a type-C cable.
- Tripod Mount : Connects to the tripod.
Button Description
**| Power| Press: Standby mode/wake up device | Hold:** Power on/off
* The power indicator stays solid red when the device is on.
---|---|---
| Capture| Non-Menu Mode:
Press: Capture snapshots | Hold: Start/stop recording videos
| | Menu Mode:
Press: Move up
---|---|---
|
Menu
| Non-Menu Mode:
Press: Switch palettes | Hold: Enter menu
Menu Mode:
Press: Confirm/Set parameters. | Hold: Save and exit menu.
| ****
Zoom
| Non-Menu Mode:
Press: Switch digital zoom | Hold: Correct non-uniformity of display (FFC)
Menu Mode:
Press: Move down
Install Battery
Notes :
- Take the battery away if you do not use the device for a long time.
- The battery type is 18650 with the protection board, and the battery size should be within 19 mm × 70 mm. The rated voltage and capacity are 3.6 VDC/3.35 Ah (12.06 Wh).
USB Connection
Steps
- Turn on the device and lift the type-C interface cover.
- Connect the device and power adapter with a type-C cable to power on the device.
App Connection
Steps
- Scan the QR code to download and install the app.
- Select in the device menu to enable hotspot.
- Turn on WLAN of your phone and connect to the device hotspot.
- Hotspot Name: HIK-IPTS Serial No.
- Hotspot Password: Serial No.
- Open the app and connect your phone with the device. You can view the interface of device on your phone.
- Firmware Upgrade
- Browse and Download
- Remote Control
- Preview
- HIKMICRO Academy
- Online Service
More Operations
Scan the QR code to obtain the user manual for more detailed operations.
© 2023 Hangzhou Microimage Software Co., Ltd. All rights reserved. About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Acknowledgement and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACKS, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR THE ILLEGAL HUNTING OF ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSE WHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
These clauses apply only to the products bearing the corresponding mark or information.
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note : Due to the device size limit, the above statement may not be disclaimed on the device.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under Directive 2014/30/EU (EMCD), Directive 2014/35/EU (LVD), Directive 2011/65/EU (RoHS), Directive 2014/53/EU. Hereby, Hangzhou Microimage Software Co., Ltd. declares that this device (refer to the label) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.hikmicrotech.com/en/support/downloadcenter/ declaration-of- conformity/
Frequency Bands and Power (for CE)
The frequency bands and modes and the nominal limits of transmitted power
(radiated and/or conducted) applicable to this radio device are the following:
Wi- Fi 2.4 GHz (2.4 GHz to 2.4835 GHz), 20 dBm. Directive 2012/19/EU (WEEE
Directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This
product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection
point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements. This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Please read all the safety information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical safety regulations.
Transportation
- Keep the device in original or similar packaging while transporting it.
- Keep all wrappers after unpacking them for future use. In case of any failure occurred you need to return the device to the factory with the original wrapper.
- Transportation without the original wrapper may result in damage to the device and the company shall not take any responsibility.
- Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.
Power Supply
- The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A) according to the IEC61010-1 standard. Please refer to actual products and technical specifications for detailed information.
- Make sure the plug is properly connected to the power socket.
- DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.
Battery
- The external rechargeable battery type is 18650, and the battery size should be 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
- For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur.
- CAUTION : Risk of explosion if the battery is replaced by an incorrect type.
- Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).
- Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
- Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.
- Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
- Dispose of used batteries according to the instructions.
Maintenance
- If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
- Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
- Make sure the running environment meets the requirement of the device. The operating temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the operating humidity shall be from 5% to 95%.
- DO NOT expose the device to high electromagnetic radiation or dusty environments.
- DO NOT aim the lens at the sun or any other bright light.
- Place the device in a dry and well-ventilated environment. Emergency If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE : The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries
Facebook : HIKMICRO Outdoor Instagram: hikmicro outdoor YouTube : HIKMICRO Outdoor Linkedin : HIKMICRO
- Web: [email protected]
- E-mail : [email protected]