T G TG-280 Portable Wireless Speaker Bluetooth Speaker User Manual
- June 1, 2024
- T G
Table of Contents
T G TG-280 Portable Wireless Speaker Bluetooth Speaker
Product Information
- Specifications:
- Compliance: Part 15 of FCC Rules
- Interference Handling: Must not cause harmful interference and must accept any received interference
Product Usage Instructions
- Compliance Statement:
- Ensure that the device is used by Part 15 of FCC Rules to prevent harmful interference.
- Interference Handling:
- The device must be able to accept any interference it receives, even if it causes undesired operation.
- Do not attempt changes or modifications that are not approved as they could impact the device’s performance.
FAQs
- Q: What should I do if the device causes interference?
- A: If the device causes interference, try repositioning it or adjusting its settings. If the issue persists, contact customer support for further assistance.
PRODUCT SPECIFICATIONS
- Wireless: V5.3
- Support: L2CAP/A2DP/AVCTP, can receive an AUDIO signal and control the AUDIO device. Support HSP//HFP(Handsfree profile), with HANDS-FREE functions.
- Working distance: 10M
- SNR: ≥90db
- Battery: about 1200mAh
- Normal volume playing time: 4H
- Speaker driver: $57mm*1
- Speaker Power: 4/5W * 1
- Frequency response: 120Hz-20KHz
- Unit size: 194.860.279.4mm
- Unit weight: about 405G
- Charging: 5V/500mA
- Charging time: 3-4H
- Solar panel power: 5.5V/0.9W
PRODUCT FEATURE
- International advanced wireless chip and circuit design techniques, support wireless devices.
- With the FM function, can search radio station broadcasts automatically.
- With a Hi-Fi speaker, to make sure a clear and bright sound.
- Support Micro SD card and USB card, play MP3 format audio.
- The wireless working distance is 10 meters.
- It will close automatically after 30 mins if disconnected Wireless.
- Support TWS.
- Support Solar panels.
- With torchlight.
KEY AND SLOT FUNCTION
- DC 5V slot: Use the standard Micro USB V8 charging cable for power charging.
- TF slot: It can decode and play MP3 format audio when put TF card into the slot.
- USB slot: It can decode and play MP3 format audio when the USB card into the slot.
- AUX line in the slot: Use the Mini 3.5 head input through outside devices.
- Torchlight switch: turn to the right is on /left is off.
- Power switch: Press long for power on /power off.
- When playing music,(USB card/TF card/wireless), short press for “play/pause”. In FM mode, press short to search station automatically, and press again to stop searching. Under wireless mode with mobile paired, when a call comes, press short to answer a call hands-free, press again to hand up, and press twice to ring up a call.
- When playing music, press short for the next song, and long press to turn up the volume.
- When playing music, Press short for the last song, and long press to turn down the volume.
- Short press to switch model (USB card/TF card/wireless/FM). Keep the two speakers under Wireless mode without pairing, press the “M” key for 3 seconds on either of the speakers until hear a hint and in the meantime the button light stops flashing, now it is TWS mode, then can paire the mobile.
NOTE:
- In the FM mode, pull out the antenna to increase the radio signal.
- Pis close the torchlight when charging by a charger or solar.
- The solar charging fast and best if the solar panel is vertically irradiated by the strong sunlight, and charging is weak if cloudy or clouded.
FCC
Warning Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used following the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>