CASABREWS MK1403-UL 4 In 1 Stainless Steel Milk Frother Instruction Manual
- June 15, 2024
- CASABREWS
Table of Contents
CASABREWS MK1403-UL 4 In 1 Stainless Steel Milk Frother
IMPORTANT SAFEGUARDS
Before using this appliance, please follow these basic precautions
- Carefully read all instructions before operating the appliance for the first time and save for future reference.
- Remove and safely discard any packaging materials and promotional labels before using the appliance for the first time.
- To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
- To protect against electrical shock, do not immerse the power cord, power plug or motor base in water or any other liquid, or allow moisture to come into contact with.
- Do not place the appliance near the edge or a bench or table during operation.
- Do not place the appliance on or near a hot gas or electric burner, or where it could touch any other source of heat.
- Do not use on a sink drain board.
- Always use the appliance on a dry, level surface.
- Keep the appliance clear of walls, curtains and other heat or steam-sensitive materials.
- Provide adequate space above and on all sides for air circulation around the appliance.
- Unwind the power cord fully before use.
- Do not allow the power cord to hang over the edge of a table or counter, touch hot surfaces or become knotted.
- The appliance is not intended to be operated by means of an external timer or a separate remote control system.
- Do not touch hot surfaces, Use handles or knobs.
- The appliance has been designed specifically for the purpose of foaming milk and other dairy milk alternatives and is not intended to whip, thicken or heat other food substances eg. oil, eggs, butter, heavy whipping cream, soups, gravies etc.
- The appliance is not designed to mix a large number of dry ingredients or melt large food pieces eg. cubed chocolate, ground nuts, whole spices, fresh herbs, Ice cubes etc.
- The underside of the jug must always be clean and dry before placing onto the power base.
- Attach the jug lid securely to the jug before operation.
- Do not remove the jug lid during operation.
- Use caution when pouring foamed milk from the jug as the jug and hot milk may scald.
- Do not operate the appliance without liquid. Always fill to at least the ”MIN” marking and no more than the “MAX” marking inside the jug.
- The jug must only be used with the power base provided. Do not use attachments other than those provided with the appliance as it may result in fire, electric shock or injury to persons.
- Do not put metal or similar items into the jug as this may damage or affect the operation of the appliance.
- To disconnect, press the START-STOP button ( the button surround should stop flashing ), then remove the plug from the power outlet.
- Always remove the plug from the power outlet and allow it to cool if the appliance is not in use, before attempting to move the appliance, cleaning, disassembling, assembling and when storing the appliance.
- Keep the appliances and accessories clean. Strictly follow the care and cleaning instructions described in this book.
- Do not use harsh abrasive caustic cleaners or oven cleaners when cleaning the appliance.
- This appliance is for household use only. Do not use the appliance for anything other than its intended purpose as described in this book. Do not use outdoors. Do not use it in moving vehicles or boats.
- Do not leave the appliance unattended when In use.
- This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
- Regularly inspect the power cord, power plug and actual appliance for any damage. Do not operate if damaged in any way or after the appliance malfunctions.
- For any maintenance other than cleaning, visit www.casabrews.com or contact Customer Service by email： [email protected].
WARNING Always ensure the frothing disc is securely attached to the milk
jug before use.
WARNING Frothing disc is a choking hazard. Children must always be
supervised and never left unattended with appliances.
WARNING Never immerse the power base, power cord or power plug in water
or allow moisture to come into contact with these parts.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
KNOW YOUR MILK FROTHER
- Jug Lid
- Milk Jug
- Power Base
- LED Indicators
- Start/Stop Push-Dial
- Cord Wrap
- Jug Handle
- Frothing Disc
- Stirring Disc
A. Warm Thick Foam Indicator
The warm, thick foam setting heats and froths your liquid to create a rich,
dense style of warm microfoam.
The crowning touch for your cappuccino.
B. Warm Foam Indicator
The warm foam setting heats and froths, and with a gentle swirl of the pitcher
at the end, creates a loose style of warm microfoam-like a cloud floating on
your café au lait and lattes.
C. Heating Indicator
The Heating setting heats your drink without generating any foam. This setting
automatically slow-stars your
drink to keep it from scorching, for amazing steamed milk, hot chocolate and
more!
D. Cold Foam Indicator
The cold foam setting creates a luscious, silky microfoam filled with millions
of tiny bubbles. Use milk and coconut milk for the perfect cold brew topper.
E. Start/Stop Push-Dial
Press the centre of the dial to start or stop the operation. Turn the dial to
choose the setting you want.
-
Frothing Disc
For Warm Thick Foam, Warm Foam and Cold Foam. -
Stirring Disc
For Heating. -
MAX Fill Line 2
For Heating. 500ml -
MAX Fill Line 1
For Warm Thick Foam, Warm Foam and Cold Foam.250ml -
MIN Fill Line
120ml
BEFORE FIRST USE
- Before first use, ensure you have all parts and accessories-power base, milk jug, frothing disc, stirring disc and jug lid.
- Remove and safely discard all promotional labels and packing materials attached to the milk frother.
- Wash the milk jug, discs and lid in warm soapy water then rinse and dry thoroughly. Wipe the exterior of the power base with a soft damp cloth then dry thoroughly.
MAKING DRINKS
-
Place the milk frother on a fat-level surface and plug the power cord into a 110V-120V power outlet. The indicators will all light up once, then only the Warm Thick Foam indicator will light up and the other indicators will off.
NOTE: Are seconds of norse, talk fopervill enter sleep mode. All the indicators will of. -
Select the frothing or stirring disc.
Choose the frothing disc for warm thick foam, warm foam and cold foam froth.
Choose the stirring disc for heating milk. -
Insert the disc into the shaft at the base of the milk jug. Ensure the disc is inserted the correct way with the wider part of the disc at the bottom of the jug.
The dose should click’ securely onto the shaft.
NOTE
If the disc is not inserted correctly it may dislodge during operation, a grinding noise may be heard, or milk will not swirl. Do not operate the milk frother without a frothing disc inserted into the milk jug as this can cause uneven heating and burning. -
Pour the required amount of cold, fresh milk into the milk jug then cover with the jug lid. Always use cold milk and fill the milk jug between the MIN and MAX level markings. Overfilling may result in spillage, while under filling prevents the disc from working optimally.
NOTE: For optimum froth, do not exceed the MAX measurement markings inside the milk jug. -
Ensure the jug lid is securely attached and the outside of the milk jug is clean. Place the milk jug onto the power base, ensuring the jug is sitting flat.
-
Turn the Start/Stop push-dial to the desired setting. The indicator that corresponds to the selected setting will light up.
-
Only press the Start/Stop push-dial once, firmly. The milk frother will start to work and the indicator will slowly blink.
If the milk frother does not do this, try pushing the Start/Stop push dial again to ensure it has been properly activated. -
To stop the process at any time, press the Start/Stop push-dial again.
-
When the process ends, the milk frother will automatically stop. This will take anywhere between 2-7 minutes.
-
Carefully remove the milk jug from the power base as the milk jug and contents will be hot. Be careful not to place the milk jug on a table cloth, plastic surface or heat-sensitive surface which may scorch or melt.
-
Remove the jug lid, and pour and/or spoon out the frothed milk.
-
Clean the milk jug and disc immediately after use. Both will be hot so allow them to cool completely (or fill the milk jug with water for quick cooling) before disassembling.
TIPS
- Always use cold, fresh ( or freshly opened ) milk. The colder the liquid the better. Warm milk will not foam up properly.
- Not all milk alternatives produce foam. Experiment with different milk options and frothing discs to achieve the desired result.
- When frothing big batches, allow the milk frother to rest for about 3 minutes after every 2 frothing cycles.
- Ensure the milk jug and frothing disc are clean before use.
CLEANING AND MAINTENANCE
Both the jug lid, milk jug and disc should be cleaned immediately after each use to prevent build-up of milk residue.
- Unplug the power cord from the power outlet before cleaning.
- The milk jug and disc will be hot immediately after use, so carefully remove the milk jug from the power base and fill it with tap water. Once the milk jug and frothing disc have cooled completely, remove the frothing disc and rinse off any milk in warm water.
- Wash the milk jug, jug lid and disc in warm soapy water, rinse and dry thoroughly. The seal from the lid can be removed and washed separately.
- Wipe the exterior of the power base with a soft damp cloth. Dry thoroughly.
NOTE: Never immerse the power base in water or any other liquid. The
outside of the milk jug must always be clean and dry before placing on the
power base prior to use.
NOTE: The milk jug, jug lid and discs can be washed in the dishwasher
(top shelf only). However, to extend the life of the discs, we recommend these
be washed by hand.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Milk is not foaming? | **** |
Milk is warm or too hot to foam.
| Use cold, fresh ( or freshly opened ) milk.
Do not re-foam already heated milk.
Milk is not heating?
| The milk jug is not positioned on the power base.| Ensure the milk jug is
Correctly positioned onto the power base.
The milk frother failed to activate.| Ensure that the milk frother has been
properly activated and push the Start/Stop push-dial again.
Frothing disc is not moving or is dislodged?
| The frothing disc is not inserted correctly.| ****
Ensure the frothing disc is securely and correctly attached.
The frothing disc has dislodged during operation.
Ingredients have been added too quickly or too much.| Add ingredients (if
desired) slowly and in small quantities after the milk has already started
swirling.
Burnt milk?
| Milk is not swirling correctly.| Ensure the frothing disc is securely and
correctly attached.
Milk Jug has not been cleaned properly and milk residue from previous use is
burning.| Ensure the milk jug is thoroughly cleaned after each use and between
consecutive uses.
Nothing happened after pressing the Start/Stop button.
| The frothing disc is not inserted correctly.| Ensure the frothing disc is
securely and correctly attached.
The milk frother failed to activate.| Ensure that the milk frother has been
properly activated and re-push the Start/Stop push-dial again.
The indicators are all off?| After 30 seconds of non-use, the milk
frother will enter sleep mode.| Turn or press the Start/Stop push dial to
reactivate the milk frother.
NOTE: If your problem is not listed, please contact Customer Support.
WARRANTY INFORMATION
- We provide a warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 12 months, starting from the date on which the appliance is sold to the end user.
- The warranty only covers defects in material or workmanship.
- The warranty will not apply in cases of:
- Normal wear and tear.
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions.
- Partially or completely dismantled appliances.