ELECOM M-VM510 Gaming Mouse User Manual
- June 15, 2024
- ELECOM
Table of Contents
ELECOM M-VM510 Gaming Mouse User Manual
Precautions
This manual describes the important precautions you should take for safe operation of this product. Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
Meaning of symbols
- Please do not use this product for anything other than as a mouse for PCs.
- Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
- If this product is used on a transparent surface such as glass or a highly reflective surface such as a mirror, the optical sensor will not function correctly and the mouse cursor movement will become unstable.
- Although the sensor light is not visible, please note that looking directly into the sensor may hurt your eyes.
- When you wish to dispose of this product, be sure do so in accordance with the local ordinances and laws of your area.
Cleaning this product
If the body of this product becomes dirty, wipe with a soft, dry cloth.
Using a volatile liquid such as paint thinner, benzene or alcohol may affect
the material quality and/or discolor this product.
Please note the following for disinfection.
Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant
solution. Make sure there are no loose droplets and gently wipe the product
using the cloth. After wiping, dry thoroughly and wipe off any residual
liquid. * Do not spray any liquid onto the product directly. Doing so can
cause electric malfunctions.
⚠ IMPORTANT
? Do not spray any liquid onto the product directly. Doing so can cause
electric malfunctions.
Cautions for Wireless Equipment
This product is a wireless device that can use the entire 2.4 GHz band, and is
able to avoid the mobile entity identification device range. The GFSK method
is adopted as the radio wave method, and the interference distance is 10 m.
The 2.4 GHz band is also used in medical devices, Bluetooth, and wireless LAN
devices of the IEEE 802.11b/11g/11n standards. Before using this product,
check that there are no other “radio stations” operating nearby. If
electromagnetic interference occurs between this product and other “radio
stations”, move this product to another location or stop using this product.
- Other “radio stations” refer to industrial, scientific and medical devices
using the 2.4 GHz band, the same as this product, other
radio stations of this type, licensed radio station premises for a mobile object identification system that is used in factory production lines, certain non-licensed low power radio stations, and amateur radio stations.
⚠ WARNING
?
- Do not use in equipment which may cause serious effects due to it malfunctioning. There are rare cases in which an external radio wave at the same frequency, or the radio wave emitted from a mobile phone, causes this product to malfunction, slow down, or fail to operate.
- Do not use this product in places where radio wave usage is prohibited, such as hospitals. Radio waves of this product may affect electronic devices and medical devices (for example pacemakers).
- Due to the possibility of hindering safe navigation of aircraft, use of wireless mouse in aircraft is prohibited by the Civil Aeronautics Act. Turn off the power of the wireless mouse before boarding and do not use after boarding.
- ELECOM is not liable for any accidents or any indirect or consequential damage incurred due to the failure of this product.
How to use
Items included in this package
The following are included in this package. Verify the package to ensure all items are accounted for prior to using this product. While every effort has been made to ensure proper packaging, in the event that any shortage or damage is discovered, please contact the retailer where the product was purchased.
- VM510 Main unit x 1
- Receiver unit x 1
At the time of shipment, it is stored in the receiver unit storage part of the mouse body. Please remove before use.
- USB Type-C® to USB-A paracord charging cable (approx. 1.5 m / 5 ft) x1
- Receiver extension adapter x 1
- Additional mouse feet for 2-Mode system x 1
- Cleaning cloth x 1
- V custom logo sticker x 1
Name and function of each part
Mouse
① Left button
To left click on your PC.
② Right button
To right click on your PC.
③ Wheel
Rotate forward and backward or click like a button to operate your PC.
④ “Back” button
Performs the “Back” function on the Web browser.
⑤ “Forward” button
Performs the “Forward” function on the Web browser.
⑥ and ⑦ Additional buttons
Any function can be assigned to these buttons.
- At the time of purchase, nothing is set.
⑧ DPI stage switch button
Count number (pointer movement speed) can be changed between 5 levels.
The count number for each stage can be adjusted. To adjust it, please install
the EG Tool from our website.
For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” –
“Setting the DPI Stage”
You can assign the function for all the buttons from to . To configure the button assignment, please install the EG Tool from our website. For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” – “Setting the function of the buttons”.
⑨ Notification LED
⑩ USB Type-C port
Port to connect the supplied charging cable.
⑪ Optical sensor
This sensor will detect mouse movements when you move the mouse.
- The sensor uses invisible (transparent) light. Please note that direct viewing of the light source may hurt the eyes.
⑫ Power switch
When using it with wireless connection, turn the power on / off on the mouse body.
⑬ Receiver unit storage part
The receiver unit can be stowed here when it is not being used with the mouse or it is being wirelessly connected.
Receiver unit
⑭ USB connector (male)
Connects to the PC USB-A port
Connecting and setting up the mouse
Using in wireless mode
- Charging the battery
- Connect the USB Type-C connector of the charging cable supplied to the USB Type-C port of this product.
- Connect the USB-A connector on the included charging cable to the USB-A port on your PC.
Ensure that the connector is correctly
oriented to the port. If there is strong resistance when inserting, check the
shape and orientation of the connector. Forcibly inserting the connector may
damage the connector, and there is a risk of injury. Do not touch the terminal
portion of the USB connector.
3) Turn on the PC, if it has not been already switched on. The RGB LED light
flashes in the color corresponding to the DPI stage currently set (the default
is DPI2: purple) and starts charging. When the device is fully charged, the
LED will light up in the color corresponding to the current DPI stage (the
default is DPI2: purple).
It takes about 5 hours to fully charge this product. If the RGB LED light continues to be lit up in the color corresponding to the current DPI stage (the default is DPI2: purple) even after the stipulated charging time, remove the charging cable and stop charging for a moment. Otherwise, this can cause overheating, rupturing or fires.
2. Turn the power ON
- Slide the power switch on the underside of this product to the ON position.
The RGB LED light will light up for 3 seconds in the color corresponding to the current DPI stage (the default is DPI2: purple). When the battery level is low, the LED light will blink quickly in the color corresponding to the current DPI stage (the default is
DPI2: purple). (The default is DPI2: purple) Power-saving mode When the mouse is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. The mouse returns from power-saving mode when it is moved. Mouse operation may be unstable for 2-3 seconds after returning from the power-saving mode.
3. Connect to a PC
- Start up your PC. Please wait until your PC has started up and can be operated. 2) Connect the receiver unit and charging cable to the receiver extension adapter and insert them into the USB-A port of your PC.
Ensure that the connector is correctly oriented to the port. If there is
strong resistance when inserting, check the shape and orientation of the
connector. Forcibly inserting the connector may damage the connector, and
there is a risk of injury. Do not touch the terminal portion of the USB
connector. When removing the receiver unit This product supports hot plugging.
You can remove the receiver unit even when the PC is running. 3) The driver
will be automatically installed, and you will then be able to use the mouse.
You can now use the mouse.
Using in wired mode
1. Connect to a PC
- Connect the USB Type-C connector of the charging cable supplied to the USB Type-C port of this product.
- Start up your PC. Please wait until your PC has started up and can be operated.
- Connect the USB-A connector on the included charging cable to the USB-A port on your PC.
Ensure that the connector is correctly oriented to the port. If there is
strong resistance when inserting, check the shape and orientation of the
connector. Forcibly inserting the connector may damage the connector, and
there is a risk of injury. Do not touch the terminal portion of the USB
connector.
4) The driver will be automatically installed, and you will then be able to
use the mouse. You can now use the mouse.
You will be able to assign functions to all the buttons and setup the DPI
count by installing the settings software “EG Tool”. Please continue to
“Setting up the ELECOM GAMING Tool (EG Tool)”.
Installing the mouse feet
This product comes with a mouse feet that attaches to the bottom of the mouse. By changing the surface area of the mouse feet, it can be adjusted to your preferred comfort. * Please peel off the blue protective film before attaching the mouse feet.
ELECOM also has a lineup of replacement mouse feet that are sold separately. Click here for the product page
Specifications
Compliance status
CE Declaration of Conformity
https://www.elecom.co.jp/global/certification/pdf/CE_DoC.pdf RoHS
Compliance
https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf CE
Authorised representative: Amazon Services Europe S.à r.l 38 avenue John F.
Kennedy, L-1855 Luxembourg
WEEE Disposal and Recycling Information This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE should be treated separately to prevent possible harm to the environment or human health.Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE. FR: INFORMATION DES CONSOMMATEURS SUR LA RÈGLE DE TRI https://www.elecom.co.jp/global/certification/pdf/FR-Info-Tri.pdf
Singapore
Operating Frequencies: XXXX-XXXX MHz Maximum field intensity / RF Output
power: X.XX dBm / X.XX mW
UK Declaration of Conformity
https://www.elecom.co.jp/global/certification/pdf/UK_DoC.pdf
RoHS Compliance
https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf
WEEE Disposal and Recycling Information
This symbol means that waste of electrical and electronic equipment (WEEE)
should not be disposed as general household waste. WEEE should be treated
separately to prevent possible harm to the environment or human health.
Consult your retailer or local municipal office for collection, return,
recycle or reuse of WEEE.
US
FCC ID: YWO-M-VM510
FCC ID: YWO-E01A This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE; This equipment has been tested and found to comply with the limits for a
Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiated
radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help
NOTICE: The manufacture is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. Such modifications
could void the user’s authority to operate the equipment.
In order to make improvements to this product, the design and specifications
are subject to change without prior notice.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment. (Example – use only shielded
interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 0.5 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a
separation distance of at least 0.5 cm from all persons and must not be co-
located or operating in conjunction with any other antenna or transmitter.
Responsible party ELECOM USA, Inc. 4041 MacArthur Blvd Suite 400, Newport
Beach, CA 92660 USA elecomusa.com
Vietnam / Vit Nam
RoHS compliance (Chng Nhn t Tiêu Chun RoHS)
https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf
References
- ELECOM USA
- elecomusa.com.com/
- ACCESSORY – M-S-VM600｜ELECOM GAMING｜V custom - アクセサリー
- ページを移動します
- ページを移動します
- ページを移動します
- ページを移動します
- ページを移動します
- ページを移動します
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>