STARLINE EL224 Wireless Charging Speaker User Manual
- June 1, 2024
- StarLine
Table of Contents
EL224-USER MANUAL
EL224 Wireless Charging Speaker
How to Use Correctly?
Overview
- Wireless Charging Pad
- Vol-/Previous Track
- Play/Pause/ON/OFF
- Light button
- Vol +/Next Track
- Charging speaker/Bluetooth LED indicator
- Wireless Charging LED Indicator
- TYPE-C charging port
Specifications:
- Model: SL526
- Item: EL224
- Wireless Output Power: 5W 7.5W 10W
- Input: DC 5V 2A,9V 2A
- Battery capacity: 3.7V/1800mAh 6.66Wh
- Speaker output power: 5W
Operation Instructions
- Power On: Long press the button for more than 3 seconds to turn on the speaker, the indicator will light blue and will hear a tone.
- Pairing: Once the speaker is turned on, use the mobile device to search for Bluetooth ID ‘EL224’. It will pair automatically.
- Power Off: Long press the button for more than 3 seconds to turn off the speaker.
- Play/Pause: When listening to music, press the button once to pause/play music.
- Next track/Vol+: Short press to next track, long press to increase volume.
- Previous track/Vol-: Short press to last track, long press to decrease volume.
- Light: Short press light button sequentially to change the display mode and turn off the light.
- Charging Speaker: Use the USB cable included to connect the speaker to an adaptor, the LED indicator will display a solid red light. When the speaker is fully charged, the red light will be off.
- Wireless charging: Use the USB cable included to connect the speaker to an adaptor, place the wireless charging supported mobile device on top of the charging pad, the LED will glow green when device is charging. The phone will begin to charge automatically.
- Try to use a PD/QC fast charging adapter with more than 18W for power supply to enhance the wireless charging speed.
Attention:
- Listen to the music at an appropriate volume to avoid the risk of damaging your hearing and sound system.
- Avoid the exposure to rain, water droplets, and prolonged exposure to high temperature and high humidity environment.
- When in use, keep the product away from heat and high pressure and do not let children play with it unattended.
- When the music volume decreases or is distorted, it may indicate that the battery is low and needs to be charged.
- Do not drop or bump and apply heavy pressure to the product to avoid damage.
- Do not attempt to disassemble the product.
- Turn off the power and unplug the charger power cable when the product is not to be used for a long period of time.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposurecondition without restriction.
FCC ID: 2BCGV0013
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>