StarLine S9 Lite Security Telematic System User Manual
- June 9, 2024
- StarLine
Table of Contents
S9 Lite Security Telematic System
Product Information
The S9 v2 Security-telematic system is a comprehensive security
system designed to keep your vehicle safe from unauthorized access
and theft. It features keyless-go, driver authentication by
wireless tag, paired smartphone via Bluetooth Smart or by PIN code
entered with factory buttons (Pin-to-Drive), and an anti-hijack
mode by a tag loss in trip or by remote command. The system also
has short range radio control secured with Dialogue Code and 128
bit encryption keys, ensuring security against all existing code
grabbers. It has an embedded 2CAN+4LIN digital interface for easier
integration with modern vehicle control circuits. The system
provides control over vehicle statuses such as battery voltage,
faults, mileage, fuel level, distance to empty, etc. and enables
remote and automatic engine start by preset temperature, timer,
battery charge level. It also has a factory immobiliser bypass with
external immobiliser bypass module or with embedded data
immobiliser bypass via CAN, LIN interfaces. Other features include
remote control over parking heaters and auxiliary heaters, vehicle
location monitoring, routes logs, drive style scoring (with use of
optional GPS+GLONASS receiver), data recording and storage a trip
data in non-volatile memory (black box), universal programmable
input and output channels, Flexible Logic for customized system
operation in various individual scenarios, and a universal StarLine
Master installer’s software for system configuration and
updating.
Product Usage Instructions
It is important to note that the security system configured
parameters shall not contradict a vehicle instruction manual
requirements. The user bears full responsibility for any damage
incurred to people, animals, and assets as a result of
inappropriate use of the security system and violation safety
precautions specified in the manual. The manufacturer shall not be
responsible for any losses and injuries caused by breaching safety
rules described herein.
If your security system has a remote key or a wireless tag
(transponder), follow the below recommendations:
-
Do not carry remote key or tag on the same bundle with a car
original keys. -
Always switch over the system to service mode when handing a
car over for maintenance or car wash. -
Do not give tags and remote keys to other persons to avoid
unauthorized access to security functions. -
Do not leave remote key or tags in children and animals
reach. -
Avoid any liquids ingress in remote key.
-
Replace battery in remote key once a battery drain warning icon
appears on display. -
Store a spare tag and/or remote key battery in vehicle inside
its factory packing.
Mandatory safety precautions while use of remote engine start
functionality:
-
It should be borne in mind that a car is a source of extra
hazard. The driver can leave a vehicle only ensured that the
vehicle cannot move spontaneously or by unauthorized persons. -
Study carefully the mandatory safety precautions for remote
engine start option use: warming up.
The system has short-range control using 2.4GHz Bluetooth Low
Energy and middle-range radio control range. The rated radio
control distance and rated radio notification distance depend on
the antenna type, SIM cards, and GPS+GLONASS receiver sensitivity.
The system operates on a specific input voltage and rated current,
and it requires a tag battery and remote key battery. The main unit
dimensions and weight vary depending on the model.
S9 v2
Security-telematic system User manual
1
Content
Safety precautions ……………………………………………………………. 3 General description
……………………………………………………………………… 5 Technical specification ……………………………………………………….6
Personal ID card…………………………………………………………………………….7 StarLine.online service and
mobile app………………………………………….7 Lights and sound indication
………………………………………………………….8 Control with wireless tag (transponder)
…………………………………………10 Control with 2-way remote key …………………………………………………….12
Operation modes…………………………………………………………………………. 26 Armed
mode………………………………………………………………………………….26 Disarmed
mode………………………………………………………………………………27 Alarm
mode……………………………………………………………………………………27 Panic
mode……………………………………………………………………………………27 Anti hijack mode
……………………………………………………………………………28 Slave mode …………………………………………………………………………………..29
Hands free mode …………………………………………………………………………..29 Service (Valet)
mode……………………………………………………………………….30 Immobilizer
mode………………………………………………………………………….. 31 Remote engine start
……………………………………………………………………… 32 Parking heater control
……………………………………………………………………34 Intelligent
turbotimer………………………………………………………………………. 35 Beach
mode…………………………………………………………………………………35 Video recorder (dashcam)
control……………………………………………………36 Risky parking………………………………………………………………………………..36
Cellular control commands ………………………………………………………….. 36 Accessories
registration…………………………………………………………….44 Owner authorization code (Pin-to-
Drive)……………………………………….. 47 Emergency disarming ……………………………………………………………….. 49
Optional accessories……………………………………………………………………52 Warranty
terms………………………………………………………………….54 Conformity
statement……………………………………………………………..55
2
Attention! Read the manual prior to use security system and pay attention to
the sections marked with . In order to check whether this security system is
suitable for your car follow a vehicle instruction manual and manufacturer’s
requirements. StarLine security system is a complicated technical appliance
implying connection to vehicle wiring and equipment, including those related
to engine operation. It must be installed by qualified and trained auto
electronics technicians only, passed necessary training and examined on safety
rules observing.
The security system configured parameters shall not contradict a vehicle
instruction manual requirements. User bears a full responsibility on any
damage incurred to people, animals and assets as a result of inappropriate use
of security system and violation safety precautions specified in this manual.
Manufacturer shall not be responsible for any losses and injuries caused with
breaching safety rules described herein.
If your security system has a remote key or a wireless tag (transponder)
follow below recommendations:
Do not carry remote key or tag on the same bundle with a car original keys
Always switch over the system to service mode when handing a car over for
maintenance or car wash. Do not give tags and remote keys to other persons in
order to avoid unauthorized access to security functions Do not leave remote
key or tags in children and animals reach Avoid any liquids ingress in remote
key Replace battery in remote key once a battery drain warning icon appears on
display Store a spare tag and/ or remote key battery in vehicle inside its
factory packing
Mandatory safety precautions while use of remote engine start functionality
It should be borne in mind that a car is a source of extra hazard. Driver can
leave a vehicle only ensured that vehicle cannot move spontaneously or by
unauthorized persons. Study carefully the mandatory safety precautions for
remote engine start option use:
1. Always park a vehicle at open and well ventilated area. 2. Always tighten
a parking brake, which shall be fully operable and insure of vehicle movement.
3. Make sure of leaving vehicle with automatic transmission shifted to parking
position and manual transmission shifted to neutral. 4. On manual transmission
version always execute “program neutral” procedure before leaving a vehicle to
be able activate remote engine start then. 5. Never give the security system
remote key, tag or mobile phone with StarLine app over children or other
persons unless operation manual carefully studied. 6. Before remote engine
start activation make sure of:
· engine and entire vehicle are fully operable with no faults indicated on
dashboard; · sufficient level of fuel, oil, cooling and other technical fluids
available; · necessary parameters of climate control unit, heating and other
accessories are
preset; · set fan regulator to an air circulation position for more effective
cabin cooling or
warming up.
3
Safety precautions while vehicle storage battery charging Remember that any
battery charging process implies supply of voltage exceeding the rated 12 V to
the storage battery and accordingly to vehicle circuits, which may damage
factory electronic and optional electronic equipment f vehicle. Do not use
charging and starting-charging devices for storage battery charging directly
on vehicle without disconnecting battery terminals from vehicle circuits in
following modes: · rapid charging by increased current («boost» or similar
modes); · various START modes intended for engine starting Never use starting
and charging devices for engine starting with main battery disconnected or
with inoperable main batteries connected (short circuits in banks, breakage of
plates etc.) Never use faulty charging devices, 24V charging devices and other
power supply equipment (i.e. welding inverters), not dedicated to charge 12V
vehicle batteries. It is recommended do not use so named “light up” method for
charging vehicle battery and start engine by connecting cables from a donor
vehicle battery. Owner is fully responsible for possible short circuit or
surge voltage and damaging of security system and vehicle electronic
components caused while using this method.
Follow a safe storage battery charging procedure ! Before charging a battery
terminals shall be disconnected from vehicle circuits. Then that battery
charging process can be started. After charging, connect battery terminals
back to vehicle circuits. It is necessary due to impossibility of detecting
main battery charge and health state without specific measuring equipment
(i.e. internal short circuits or plates breaks). Connecting a charging device
to an inoperable storage battery may cause a risk of car electronic equipment
and security system damage with increased over limit voltage.
4
General description
Security telematics system StarLine S9 V2 (hereinafter the system) is intended
for vehicle securing against theft, immobilising and convenient remote control
via cellular networks and location monitoring with use of global satellite
positioning systems. Depending on delivery set StarLine security system can be
controlled with radio remote key, wireless radio tag (transponder), with voice
calls, text messages and mobile app or at starline.online web monitoring
service account. Use login and password from personal ID card to sing in
starline.online account and App.
Major benefits
2 x SIM cards dual standby operation supported; embedded buzzer for installer
and owner notification; external microphone to listen vehicle interior
remotely; «Slave» mode to arm and disarm security systems with use of factory
key or
Keyless-go; driver authentication by wireless tag, paired smartphone via
Bluetooth Smart or by
PIN code entered with factory buttons (Pin-to-Drive); Anti-hijack mode by a
tag loss in trip or by remote command; short range radio control secured with
Dialogue Code and 128 bit encryption keys,
ensuring security against all existing code grabbers; embedded 2CAN+4LIN
digital interface for easier integration with modern vehicles
control circuits; control over vehicle statuses (battery voltage, faults,
mileage, fuel level, distance to
empty etc.) remote and automatic engine start by preset temperature, timer,
battery charge
level; factory immobiliser bypass with external immobiliser bypass module or
with
embedded data immobiliser bypass via CAN, LIN interfaces; remote control over
parking heaters and auxiliary heaters; vehicle location monitoring, routes
logs, drive style scoring (with use of optional
GPS+GLONASS receiver); data recording and storage a trip data in non-volatile
memory (“black box”); universal programmable input and output channels;
Flexible Logic for customized system operation in various individual
scenarios; universal StarLine Master installer’s software for system
configuration and updating.
5
Technical specification
Parameters Short range control Middle range radio control range Rated radio
control distance Rated radio notification distance
Cellular networks range
Antenna type SIM cards GPS+GLONASS receiver sensitivity
Interfaces
Input voltage Rated current Tag battery Remote key battery Operating range
Main unit dimensions Main unit weight
Values
2.4GHz Bluetooth Low Energy
868 MHz
up to 1500 m
up to 2000 m
2G version: 2G GPRS 850, 900, 1800, 1900 4G version: 2G GPRS 900, 1800
3G WCDMA B1 (2100), B8 (900) 4G LTE B1 (2100), B3 (1800),
B7 (2600), B8 (900), B20 (800)
Embedded
2 x nanoSIM
148 dBm –«cold start»
163 dBm –«hot start»
165 dBm — in active monitoring
2x CAN 4 x LIN 1 x StarLine coded data bus 1 x USB 18 programmable channels
which can be set as: 15 OC negative outputs 200 mA max 2 positive outputs
2 max 3 positive inputs 3 negative inputs 1 universal input external
temperature sensor input external service (valet) button input external
microphone sensor input
8 16 V
10 15 mA
CR2032 3V
LR03 AAA 1.5V
-40 ° … +85 °
105 63 16 mm
63 g
6
Personal ID card
Delivery set includes an owner personal ID card containing following data: ·
Login and password for StarLine personal account at starline.online or
StarLine App · Emergency disarm code for instant security deactivation when
regular disarming methods unavailable. · Service code to enter main unit
configuration parameters in StarLine Master software
Remove the protection layer from plastic card carefully. Do not use metal and
other materials sharp items to avoid occasional erasing a printed information
under layer. ! Do not tell emergency disarm code and StarLine account details
to anybody! ! Due to security reasons a personal information from ID card is
generated randomly at factory, never stored in any database and therefore
cannot be recovered once it is lost ! A system main unit with lost Service
code and Emergency disarm code cannot be normally used and must be replaced to
a new one. Recommend to copy and store ID card information in a safe place in
reach.
StarLine.online service and mobile App
StarLine system can be remotely controlled and monitored with use of
starline.online web monitoring platform and StarLine mobile app with free of
charge unlimited subscription.
Make sure that a proper local SIM card with active balance and permission to
operate with M2M smart devices is installed and configured at installation.
Correct APN details for internet access, SMS center number and time zone must
be set in system configuration. SIM card boot PIN code must be disabled prior
to inserting into the main unit.
Check out if the cellular standards and bands supported by the built-in modem
in corresponding hardware version conform to your local operator bands. Enter
Login and Password from personal ID card to sign in starline.online personal
web account or StarLine 2 mobile app (available on Android and iOS platforms).
7
All StarLine systems have preregistered account at starline.online and mobile App.
Do not forget to enter and verify your email in personal StarLine account.
Verified email is necessary to restore forgotten password, access sharing and
other important functionality.
If your system has been removed from the factory registered account for any
reason (occasionally or by a previous owner), then a new StarLine personal
account can be registered.
Control via Bluetooth
When cellular network is not available or SIM card balance is inactive, then
StarLine system can be controlled with StarLine App via Bluetooth on a short
distance from vehicle (up to 50 m approx).
Supported for smartphones with Bluetooth Low Energy 4.2 version and above.
To use Bluetooth communication make smartphone pairing in Accessories
registration mode see p.44. Then enable connection with paired device in
StarLine App Bluetooth settings.
Lights and sound indication
Security system indicates its status by means of sounds (siren or buzzer) and
lights (hazard or other lights)
– short signal
– long signal
Arming
Events
Lights
Sounds
8
Arming with one of secured zones breach Arming with Hands free mode disabling Arming with Hands free mode disabling and one of secured zones breach Disarming Disarming (one of secured zoned has been breached in armed mode) Disarming with Hands free mode disabling Alarm Warn away alarm Panic Trunk unlock Anti-Hijack mode off
— 30 sec
10 sec
—
LED service button indication
State of security system
Disarmed
Disarmed with ignition On and one of secured zones breach (doors, hood, trunk)
Armed
Armed with Hands free mode active
Engine is running Service (valet) mode Immobiliser mode active Anti-Hijack mode active Invalid emergency disarm code entered Emergency disarm code entry blocked for 15 min Valid emergency disarm code entered
30 sec
10 sec
LED light Off 1 flash per 5 sec 1 flash per 1 sec 2 flashes per 1 sec
continuous On Off Off 10 in 1 sec 4 flashes 5 flashes 2 flashes
9
Embedded buzzer sound indication
Events Waiting for authorization Tag battery discharged (at ignition On) Valid
authorization PIN code entered Invalid authorization PIN code entered
Control with wireless tag (transponder) (optional accessory)
Sounds 10 sec
! Wireless tags availability depends on delivery set.
! The included and optional tags are supplied from factory in transport (power
saving) mode, i.e. inactive! Pushing a tag button in this mode is indicated by
green and red alternating flashes of the built-in LED. To switch it to normal
mode push a tag button several times until flashing color turns to green.
Connection check
Push button once to check tag connection status. 2 LED flashes means
connection with security main unit established, 1 flash means disconnected. A
flash color corresponds to the current active mode:
green Regular mode, Anti-hijack is disabled red Anti-hijack mode is
enabled yellow Service mode is enabled
Control over security system
Duration of a tag button pushing: · short push and release button, followed
with a flash of corresponding current operation mode; · long push and hold
button until LED begins flashing.
Duration of long push are of 2 levels: · 1 level push and hold button
followed with double short flashes of a current
10
operating mode and then long flash at which button must be released; · 2 level
push and hold the tag button followed with double short flashes of a
current operating mode, then one long flash and then followed with serial
flashes at which button must be released.
Command Arm / disarm Enable / disable Anti-hijack by a tag away Enable / disable Service mode
Button push 1 short
long 1 level long 2 level
Replacing a tag battery Wireless tag (transponder) is equipped with CR2032 type Li-ion battery.
Tag battery discharging is indicated with 3 sounds of embedded main unit
buzzer (or siren) at ignition On and owner is notified with text message to
his phone number. Then battery must be replaced as soon as possible.
To replace battery open a tag casing carefully with a flat metal or plastic
item, remove discharged battery from slot. Install a new battery in the slot
observing correct polarity (positive side up, as shown on picture). Then fix a
cover back. Tag is ready for operation.
A smartphone with support of Bluetooth 4.2 and above can also be used as a
tag. See Devices registration article to pair a smartphone as a tag.
11
Control with 2-way remote key (optional accessory)
! LCD remote control and matching external RF868 transceiver are optional
accessories and can be ordered from local dealer.
Display icons meaning
Remote engine start Icons Meaning Engine is running Automatic engine start by
timer enabled Periodic automatic engine start enabled Automatic engine start
by temperature enabled Automatic engine start by battery voltage drop enabled
Program neutral executed Parking heater activated (blinking) 12
Operating modes Icons Armed
Meaning
Hands Free mode Service mode
Programming mode
Buttons lock
Anti-Hijack mode
Secured zones
Icons
Meaning
Ignition switched On
Parking brake tighten Hood open
Door open
Trunk open Sensors
Icons
Meaning 13
Motion or tilt sensors triggered Auxiliary sensor 1 triggered Auxiliary sensor
2 triggered Tilt sensor triggered Motion sensor triggered Shock sensor warning
level triggered
Shock sensor main level triggered
Shock sensor disabled
Additional indicators
Icons
Meaning
Data transfer
Replace remote battery
Siren sounds enabled
Siren sounds disabled
14
Control commands
Definition of buttons push duration
Short push
Pushing one or two buttons once less than 1,5 sec.
Example: – first button short push; first and second buttons simultaneously.
– short push of
Pushing and holding a button or two buttons until melody and vibration come
up.
2 levels of a long pushing are envisaged:
1 level long push push and hold until a first melody.
Long push
Example:
1 button long push;
— 1 and 2 buttons long push simultaneously;
2 level long push — push and hold until a second melody;
Double push Triple push Sequential push
Example:
— 4 button long push of a 2 level.
Double push of one button within 1 sec.
Example:
— double push of 1 button.
Triple push of one button button within 1 sec.
Example:
— triple push of 1 button.
Double push of one or two buttons with different duration. First pushing is long (1 or 2 level) and second push is short. Firs button
15
must be released before pushing next button.
Example:
— sequential pushing 2 and 1 buttons.
Control commands
Commands Arm
Buttons combination
Arm without sound confirmation
Disarm
Disarm without sound confirmation
Request vehicle statuses (engine and cabin temperature, battery voltage, fuel
level). At remote start remaining engine run time.
Start engine
Stop engine
Start parking heater
Stop parking heater
Find car on parking
Switch shock sensor On / Off
Switch motion / tilt sensor On / Off
Enable Panic
Unlock trunk Enable automatic engine start
configuration menu
16
Enable / disable Service mode
Enable / disable Hands free mode Enable / disable buttons lock Enable /
disable Auto buttons lock Enable vibration only Enable sound profile 2 Enable
sound profile 1 Enable sound profile 0 Enable sound profile -Activate Flexible
Logic program
or configuration menu
configuration menu
Modes menu
Some options and operation modes are controlled in Modes menu: Hands Free mode, Service mode, Autostart settings.
Modes menu is entered and exited with 4 button long push level 1: Modes menu is automatically exited when no any buttons pushed 15 sec.
Modes submenu is flipped with
and
buttons short push forward and backward
accordingly.
Submenu options are selected with 2 and 3 buttons short push:
Parameters are tuned with
and
buttons short push up and down accordingly.
Long buttons pushing increases parameters tuning speed.
Listing menu points, changing settings and menu exit are confirmed with melody.
17
Icons
Parameters
Description
Hands Free mode
Enable / disable Hands Free mode
Automatic engine and parking heater start by timer
Set engine start hour and min.
Engine and parking heater autostart settings are switched with short pushing
buttons
and
.
Engine start settings are indicated with digit 1, parking heater settings with digit 2.
Periodic engine start
Set engine start periods in hours
Automatic engine start by temperature
Automatic engine start by battery voltage
Set engine start temperature in Celsius degrees
Set main storage battery voltage limit in Volts
Tune step
—
1 min
1 hour 1 º 0,1 V
Service mode Enable / disable service mode
—
Settings menu Operation parameters are set in the Setting menu. Settings menu is entered and exited with 4 button long push level 2:
18
1 parameter function number 2 parameter value
Operation menu points are flipped with
and
buttons up and down accordingly.
Parameters are tuned with
and
buttons short push up and down accordingly.
Long buttons pushing increases parameters tuning speed.
Listing menu points, changing settings and menu exit are confirmed with melody.
Time zone setup
Select 1 item of Settings menu and set matching time zone with
and
buttons.
! Current time is automatically retrieved from cellular network and satellites data (if GPS module is available).
Setting lights and siren indication and Arming and Disarming
Select 2 item of Settings menu and set the mode with
and
buttons:
0 hidden mode without siren and lights indication 1 silent mode with lights indication only 2 full mode with siren and lights indication 3 only siren indication
Setting siren volume at Arming and Disarming
Select 3 item of Settings menu and set siren volume level with
and
buttons:
0 silent mode, 10 max volume
Setting lights and siren indication in Alarm mode
Select 4 item of Settings menu and set the mode with
and
buttons:
0 hidden mode without lights and siren indication 1 silent mode with lights indication only 2 full mode with lights and siren indication
Setting siren volume setup in Alarm mode
Select 5 item of Settings menu and set siren volume level with
and
buttons:
0 silent mode, 10 max volume
Setting motion sensor sensitivity
Select 6 item of Settings menu and set sensor sensitivity from 0 to 30 level with
and
buttons: 0 motion sensor is disabled, 30 max sensitivity
19
Setting tilt sensor sensitivity
Select 7 item of Settings menu and set sensor sensitivity from 0 to 30 level with
and
buttons:
0 tilt sensor is disabled, 30 max sensitivity
Setting shock sensor warning level sensitivity
Select 8 item of Settings menu and set sensor sensitivity from 0 to 30 level with
and
buttons:
0 warning level shock sensor is disabled, 30 max sensitivity
The warning shock sensor sensitivity must be set over the main shock sensor level.
Setting shock sensor main alarm level sensitivity
Select 9 item of Settings menu and set sensor sensitivity from 0 to 30 level with
and
buttons:
0 main alarm shock sensor is disabled, 30 max sensitivity
The main alarm shock sensor sensitivity must be set below the warning shock sensor level.
Setting tag (transponder) loss range
Select 10 item of Settings menu and set tag loss range value from 3 to 10 level with
and
buttons:
0 min distance, 10 max distance
Setting tag (transponder) detection range
Select 11 item of Settings menu and set tag detection range value from 1 to 8 level with
and buttons: 1 min distance, 8 max distance ! Tag detection range must be set less than a tag loss range. Settings remote key connection control
Select 12 item of Settings menu and set connection control period to 1 or 2 value with
and
buttons:
20
0 connection control is disabled, 1 connection check every 3 min
Setting turbotimer run time
Select 13 item of Settings menu and set turbotimer run time from 1 to 5 min with
and
buttons.
! Remote engine start must be enabled in system configuration parameters for this option. Setting remote / automatic engine start duration
Select 14 item of Settings menu and set engine run time from 10 to 60 min with
and
buttons.
Settings max duration of extended remote / automatic engine start
Select 15 item of Settings menu and set extended engine run time from 15 to 60 min with
and buttons.
Setting parking heater starting max duration
Select 16 item of Settings menu and set max parking heater starting interval from 1 to 10
min with
and
buttons.
Setting parking heater run time duration
Select 17 item of Settings menu and set parking heater run time from 5 to 60 min with
and
buttons.
Setting parking heater activation before remote engine start
Select 18 item of Settings menu and set parking heater activation before remote engine
start with and buttons:
0 do not start parking heater 1 – start parking heater before remote engine
start
Setting parking heater activation before automatic engine start
Select 19 item of Settings menu and set parking heater activation before
automatic engine
start with and buttons:
0 do not start parking 1 – start parking heater before automatic engine
start
Settings temperature for parking heater activation before remote and automatic
engine start
21
Select 20 item of Settings menu and set parking heater activation temperature before
remote and automatic engine start from 5 to 30 º with
and
buttons.
Setting temperature for automatic engine start
Select 21 item of Settings menu and set automatic engine start temperature from +10 to
40 º with
and
buttons.
Setting 2 way remote key detection range
Select 22 item of Settings menu and set remote key detection range from 1 to 10 level with
and buttons:
1 min distance, 10 max distance
Remote key sound profile menu
Sound profiles menu contains settings for commands confirmation, alarm trigger
and buttons pushing. Profiles are selected with following buttons combination:
Profile
Button combination
Description (at default settings)
1 SOUND 2
All signals at max level and vibration enabled.
2 SOUND 1
All signals at min level and vibration enabled.
3 SOUND 0
Vibration only, all sounds Off
4 SOUND —
Fully silent, vibration and all sounds Off
Changing sound profile settings
Sound profile menu is entered with Setting commands confirmation signals
long pushing level 2.
22
1 — selected signal type volume level 2 — selected sound profile number 3 — commands confirmation sound settings icon
4 — vibration: — enabled,
— disabled
Sounds volume is tuned with
and
buttons short push.
Vibration is enabled and disabled with
button short push.
Next sound signal type is flipped with button short push.
Setting alarm sounds volume
1 — selected signal type volume level 2 — selected sound profile number
23
3 — vibration: — enabled,
— disabled
4 alarm sounds volume settings icon
Sounds volume is tuned with
and
buttons short push.
Vibration is enabled and disabled with
button short push.
Next sound signal type is flipped with button short push.
Setting buttons push sound volume
1 — buttons sound volume setting icon 2 — selected volume 3 — selected sound profile
4 — vibration: — enabled,
— disabled
Sounds volume is tuned with
and
buttons short push.
Vibration is enabled and disabled with
button short push.
Next sound signal type is flipped with button short push.
Sound profile settings menu is automatically exited in 10 sec if no any buttons pushed. After exit the set sound profile is indicated for several sec.
24
Resetting sound profile to factory default settings
1. Select the necessary sound profile with corresponding buttons combination.
2. Enter sounds profile menu with
long pushing level 2
3. Hold 3 button until next sound signal
.
Setting sounds tone
The sounds tone can be also setup in sounds profile menu.
1. Enter to sounds profile menu with
long pushing level 2
2. Push buttons
shortly. The current sounds tone BP-1 or BP-2 shall be
displayed. BP-1 tone is set as default.
3. Push buttons
shortly to select next tone.
Sounds tone menu is automatically exited in 10 sec if no any buttons pushed.
Buttons auto lock
The option lock buttons automatically each time after backlit off.
It is enabled and disabled with
long push level 2.
Remote key searching
Push and hold service (valet) button for 5 sec remote key shall beep.
25
Operation modes
Security modes Supplementary modes
Armed Disarmed Anti-hijack Alarm Panic Slave Hands Free Service mode Registration Configuration
Armed mode
The following zones are controlled in armed mode: ignition, doors, trunk,
hood, shock sensor, tilt sensor, motion sensor, auxiliary sensor. If any zone
is breached then system shall trigger alarm.
System can be armed when ignition off only. If arming command received at ignition on, then only doors are locked.
System is armed by one of following ways:
pushing tag button once shortly
pushing remote key
button shortly
SMS text command 11
voice call menu command 11
command from StarLine mobile app
command from starline.online web account
arming with factory security system in «Slave»
tag loss or touching capacitive sensor in Hands Free mode
System shall confirm arming with 1 lights flash and 1 siren sound.
! If any of doors, hood, trunk are still open then system shall warn thereof by 4 siren sounds signals and 4 light flashes. Shut the breached zone and make sure that 1 light and sound of arming confirmation followed.
26
Emergency arming
In case of a tag, remote key batteries discharged and other methods of arming
via App and starline.online not available, then system can be armed with
following way:
1. Push service button or external transceiver button 3 times. 2. Switch
ignition On. 3 beeps will follow. 3. Make sure next 2 beeps come up. 4. Switch
ignition Off. 5. Leave vehicle and shut the doors.
Disarmed mode
System is disarmed by one of following ways:
short push of remote key button SMS text command 10 voice call menu command 10
command from StarLine mobile app command from starline.online web account
disarming factory security system (Slave) tag detection or holding capacitive
sensor in Hands Free mode
Disarming is confirmed with 2 siren sounds and 2 lights flashed. If alarm was
triggered while armed mode then 3 siren sounds and 3 lights flashes come up at
disarming.
All events happened in armed mode will be indicated on remote key display
after disarming.
If no any actions taken after disarming (i.e. doors, trunk were not open), then system shall automatically turns to armed mode back and lock the doors (Re-arming).
Alarm mode
Alarm shall trigger when any of secured zones is breached in armed mode. System activates siren alert sound, hazards lights flashing for 30 seconds and notifies owner with phone call and text message. If breached zone is not restored system repeats alert cycle once again. Any warning zone breaching is followed with 3 lights flashes and 3 siren sounds.
Alarm mode can be aborted with short push of a tag button and
or
remote key
buttons.
! The maximum number of zone triggering is limited to 8 times within 1 security cycle.
Panic mode
Panic mode ensure owner and vehicle security and informs on intrusion attempt.
Mode can be activated with double pushing
remote key buttons, with text
27
message 19 or a command from StarLine mobile app. System shall activate siren
alert and hazard lights flashing for 10 sec in order to scare an intruder and
attract other people attention. Anti-hijack mode Anti-hijack mode secures
driver against assault attempts in trip. The mode is activated either by owner
command or by a tag loss in trip. Anti-hijack by owner command is activated by
one of following ways:
SMS text message 31 voice call menu command 31 command from StarLine mobile
app command from starline.online personal account System enables warning
sounds and lights on upcoming engine blocking for 10 seconds. Then by reaching
a speed below 30 km/h engine will be safely stopped.
Exit from Anti-hijack mode is done by one of following ways: SMS text command
30 XXXX, where XXXX – emergency disarm code from ID card entering emergency
disarm code with service button or external transceiver button at
starline.online personal account with entering emergency disarm code
In case of invalid emergency disarm code is entered 3 times, then a code entry
will be blocked for 15 min and owner will be informed with text message. Anti-
hijack by a tag or remote key loss in trip The mode can be enabled by a tag
button long push level 1, if this option is enabled in system configuration
settings. The mode operation algorithm depends on a vehicle speed reading from
CAN bus. 1. The mode operation sequence when speed supported from CAN bus:
any of secured zones has been breached (doors, hood or trunk) motions sensor
has triggered in 30 sec system begins seeking for a tag or remote key in
another 30 sec, if a tag or remote key has not been detected, system enables
warning sound and lights for 10 sec
28
by reached a speed below 30 km/h engine will be safely stopped.
2. The mode operation sequence when speed from CAN bus is not supported:
any of secured zones has been breached (doors, hood or trunk) motions sensor
has triggered in 30 sec system begins seeking for a tag or remote key in
another 30 sec, if a tag or remote key has not been detected, system enables
warning sound and lights for 10 sec engine will be stopped in 3 min or at
brake pedal pressing.
Exit from Anti-hijack mode by a tag or remote key loss is made by one of
following ways:
when tag or remote key is detected in range SMS text command 30 XXXX, where
XXXX – emergency disarm code from ID card entering emergency disarm code with
service button or external transceiver button at starline.online personal
account with entering emergency disarm code
In case of invalid emergency disarm code is entered 3 times, then a code entry
will be blocked for 15 min and owner will be informed with text message.
Slave mode
Slave mode allows to control security system by means of a factory remote
control or Keyless-Go system.
System detects unlocking doors and disarming factory security and waits for
owner authorization with any of below methods before disarming itself:
! Waiting for authorization starts at any of door, hood and trunk open.
tag or remote key detection in range at disarming during adjusted interval
from 15 to 60 sec
entering personal PIN code with factory buttons at ignition On during adjusted
interval from 15 to 60 sec
If authorization failed with any of methods then system shall activate warning
siren sounds and then turn to alarm mode.
It is highly recommended to enable above mentioned secondary owner
authorization methods in Slave mode in system configuration settings.
Hands free mode
Hands free mode allows automatic system arming and disarming by a tag loss and
detection in range.
The mode is enabled and disabled by one of following ways:
SMS text commands 71 or 70 accordingly
29
voice call commands 71 or 70 accordingly from StarLine mobile app at
starline.online personal account in remote key operation modes menu
In this mode system is armed either by a tag loss from range or with holding
door sensor (optional accessory) with a tag away. Systems is disarmed by a tag
detection in range or with touching door sensor (optional accessory).
If any of door, hood or trunk left open when tag is away, then system shall
inform owner with SMS text message and siren alert on arming abort. Once a
breached zone restored, system shall turn armed.
If tag is lost in trip (i.e. battery critically discharged) then system shall
turn armed mode in 10 sec after any door open (auto arming).
Auto arming is not executed in Hands Free mode when tag is in range.
Disabling Hands Free mode for 1 security cycle
When tag is within detection range at a parking place, then it is recommended
to disable arming and disarming in Hands Free mode for 1 security cycle.
Hands Free is enabled / disabled for 1 cycle by one of following ways
depending on current state (disarmed / armed) accordingly: arming / disarming
with a tag button accordingly arming / disarming with remote key button 1 and
2
System shall confirm successful disabling Hands Free for once cycle with 1
sound.
System shall return to default Hands Free by following ways depending on
current state (disarmed / armed) accordingly: disarming and any of door, hood
or trunk open switching ignition On or arming command received
Service (Valet) mode
Service mode is used for temporary security deactivation and restricting
access to system configuration while vehicle maintenance, car wash etc.
Service mode can be activated from disarmed state only.
In service mode following features are disabled: arming and disarming Hands
Free mode doors lock and unlock in trip remote and automatic engine start
turbotimer trunk unlock arming with open trunk with factory remote
30
Panic Anti-hijack by a tag or remote key loss entry to systems configuration
settings entry to registration mode
Service mode is enabled by any of following ways:
tag button long push level 1 (if this option is enabled in system
configuration)
short push of remote key
buttons
SMS text command 51
voice call command 51
command from StarLine mobile app
command from starline.online account
in remote key operation modes menu
Service mode activation is confirmed with a tag LED light turned yellow.
Service mode is disabled by one of following ways:
tag button long push level 1 (if this option is enabled in system configuration)
short push of remote key
buttons
SMS text command 50
voice call command 50
command from StarLine mobile app
command from starline.online account
in remote key operation modes menu
emergency disarm code entry
Automatic exit from service mode
If this option is enabled in system configuration then system automatically turns from Service mode to Waiting for authorization at configured event and ignition On. If authorization successfully passed then system turns to Disarmed. If authorization failed then system triggers Alarm and activates engine blocking.
! This option requires owner authorization, embedded sensors and vehicle speed from CAN bus to be enabled is system configuration.
Immobilizer mode
Immobilizer mode prohibits unauthorized drive attempt.
Depending on settings system waits for owner authorization with a tag or remote in detection range or PIN code entered with factory buttons after every disarming or every ignition switching Off and at next ignition switching On. PIN code can be entered with factory buttons only when ignition is switched On.
31
If authorization is not passed within 1 min, then engine will be stopped at a
drive attempt for 1 min or until successful authorization passed.
Remote engine start
The feature allows to make remote and automatic engine start and stop to warm
up or cool down vehicle interior to a comfortable temperature and warm up
engine before a trip.
Preparation of a car with manual transmission for remote and automatic engine
starting.
If vehicle is equipped with manual transmission, then system must be set to
“Program neutral” state to prepare for further remote or automatic engine
start in following procedure:
tighten parking brake with engine running remove key from ignition barrel (or
push PTS button if applicable), engine continues
running, service button LED will light up permanently leave vehicle, shut
doors, hood, trunk and arm security system. Engine will be
stopped. system turns to Armed “N” (program neutral) icon shall appear on
remote key display and StarLine app
main screen system and vehicle are now ready for remote and automatic engine
start.
If any door is open or ignition is switched On after setting to Program
neutral, then remote and automatic engine will be prohibited until Program
neutral procedure is executed again.
Vehicle equipped with automatic transmission must be switched to Parking
position in order to prepare it for remote or automatic engine start.
Engine start
Remote engine start can be activated by one of following ways:
tag button shortly push once (if enabled in system configuration)
long push level 1 of remote key button 3 x Lock command from factory remote
control (if supported for particular vehicle
model and enabled in system configuration) SMS-text command 21 voice call menu
command 21 command from StarLine mobile app command from starline.online
personal account
Automatic engine start can be activated by following conditions:
· engine or interior temperature · main vehicle battery voltage drop
32
· periodic engine start set in hours · engine start by timer
Parameters for automatic engine start can be configured in:
remote key operation modes menu StarLine mobile app starline.online account
! Automatic engine start is allowed only in armed mode, in 5 min after last
engine stop and 1 hour after previous remote and automatic engine start.
Engine stop
Engine will be stopped when:
tag button short push once (if enabled in system configuration)
long push level 1 of remote key button SMS text command 20 voice call menu
command 20 command from StarLine mobile app command from starline.online
personal account alarm mode triggered vehicle motion detected hood open
parking brake released (for manual transmission) automatic transmission is
shifted out of parking position brake pedal pressed preset max engine
temperature limit reached
Drive after remote start without engine stop (ignition takeover)
To start driving after remote / automatic engine start without engine stop
make following depending on engine control system:
for vehicles with ignition barrel: disarm security system insert key into
ignition barrel and turn it to IGN ON start driving
options for vehicles with PTS (push-to-start) button
Option 1: disarm security system press and hold brake pedal for 3 sections
Option 2: disarm security system push PTS button 1 or 2 times
33
! Learn ignition takeover support and particular procedure from your StarLine
installer.
Parking heater (preheater) control
This feature lets warm up engine and/ or interior before a trip with remote
and automatic activating parking heater and auxiliary heater.
Parking heater can be started manually in following ways:
sequential pushing remote key buttons SMS text command 221 command from
StarLine mobile app command from starline.online personal account
Default parking heater run time at manual activation is 20 min and can be
adjusted in system configuration.
! Factory and optional parking heater may have embedded primary factory
settings, differ from those configured in system settings.
Parking heater run time can be extended with sending repeated activation
command.
Parking heater can be stopped manually in following ways:
sequential pushing remote key buttons SMS text command 220 command from
StarLine mobile app command from starline.online personal account
Parking heater can be automatically started before remote and automatic engine
start on events and terms set in system configuration.
Parking heater can be started automatically in following terms:
by engine temperature parking heater is started when engine temperature is
below the set value
by timer parking heater is started at a set time
Temperature and time for parking heater activation can be set in:
remote key operation mode menu StarLine mobile appliance starline.online
personal account
Parking heater is stopped when the set engine start temperature (for automatic
engine start) or the set parking heater run time is reached and engine will be
started then.
Default parking heater automatic run time is set on 20 min. It can be extended
by sending
34
heater start command again.
Intelligent turbotimer
Turbotimer option is used to temporary continue engine running after a trip to
cool down turbo charger and extend its lifetime.
! The option must be initially enabled and programmed while installation.
Turbotimer activation on vehicles with ignition barrel: tighten parking brake
when engine is still running. The service button LED shall light up
permanently; take a key out of ignition barrel. Engine shall keep on running.
leave a vehicle, shut door, trunk, hood and arm security system; engine shall
stop after interval sufficient for cooling down a turbine.
Turbotimer activation on vehicles with Push-to-Start button: tighten parking
brake when engine is still running; leave a vehicle, shut door, trunk, hood
and arm security system; engine shall stop after interval sufficient for
cooling down a turbine.
! Turbine cool down interval is calculated automatically and depends on engine
speed before a trip finished. Max turbine cool down interval is 5 minutes.
Beach mode
In Beach mode system is armed and disarmed without a tag and remote key, which
can be left inside vehicle. System is disarmed with owner authorization by
emergency disarm code entered with StarLine EC-1 touch sensor installed in a
door handle or another convenient place. System does not execute any commands
from remote key in this mode.
Beach mode activation procedure: 1. Disarm security system and switch ignition
Off. 2. Push service button or external transceiver button 3 times and switch
ignition On. 3 sounds confirming entry to Beach mode shall follow. Switch
ignition Off. 3. Leave vehicle and touch door handle sensor 3 times. System
shall turn armed.
Hands Free mode is switched Off in Beach mode until disarming.
Disarming (exit from Beach mode) is done by entering emergency disarm code
with touch sensor with less than 3 sec intervals. Every valid digit entry is
confirmed with sounds and flashes in corresponding number. Full valid code
entry is confirmed with double sounds and flashes.
If invalid emergency disarm code is entered 3 times, then next code entry
shall be blocked for 15 min.
! If nothing is done after disarming with emergency disarm code, then systems
shall return to armed and Beach mode remains active.
35
Video recorder (dashcam) control
! The option must be initially wired and programmed while installation.
System shall automatically switch dashcam On to begin recording: · at ignition
switched On dashcam is activated for 5 min; · at full alarm or warn alarm
triggered dashcam is activated for 2 min; · with SMS command 69 dashcam is
activated for 5 min.
! If engine is still running in armed mode then dashcam continues operating
until engine is stopped.
Risky parking
This mode can be used in places with high probability of theft and robbery. In
Risky parking mode system shall require owner authorization with factory
buttons at every switching ignition On in disarmed mode. This mode operates
regardless immobilizer mode settings made in systems configuration.
Risky parking activation: 1. Disarm security system 2. Switch ignition Off 3.
Push service button or external transceiver button twice 4. Switch ignition
On. Double sounds shall follow.
Risky parking activation is confirmed with 1 sound and flash, deactivation
with double sounds and flashes.
Cellular control commands
System can be controlled with voice and SMS text commands from the owner
master phone number (M1) and additional registered numbers (M2, M3, M4).
The first incoming call telephone number shall be automatically recorded as M1
master number. All commands received from M1 number are executed without a GSM
PIN code in default configuration. PIN code is recorded by owner at initial
call from M1 number.
Commands from M2…M4 numbers are executed with PIN code in the beginning. i.e.
system arming command: 1234 11; where 1234 PIN code, 11 arming command
number.
Voice call commands
Command
Function
0
Listen commands menu
1
2, 3, 4
Guest phones
36
10
Disarming
101
Silent disarming
11
Arming
111
Silent arming
12
Arming with shock sensors disabled
13
Arming with auxuliary sensor disabled
14
Arming with shock sensor warning level disabled
15
Arming with tilt sensor disabled
20
Remote engine stop
21
Remote engine start
31
Activate Anti-hijack
40
Request location
41
Request vehicle state
50
Disable Service mode
51
Enable Service mode
70
Disable Hands Free
71
Enable Hands Free
SMS text commands Main commands
Text commands
Function
10 ARM101 11 ARM+
Disarming
Silent disarming Arming
37
1
2, Guest 3, 4 phones
+ 111 12
13
14
15 19 PANIC 20 ENG21 ENG+ 220 221 40 GPS 41 AUTO 45 BALANCE 30 – 31 + 50 S51
Silent arming Arming with shock sensors disabled Arming with auxuliary sensor
disabled Arming with shock sensor warning level disabled Arming with tilt
sensor disabled
Panic activation
Remote engine stop
Remote engine start
Stop parking heater Start parking heater
Request location
Request vehicle state
Request cell connection status and SIM card balance Emergency disarming, where
XXXX emergency disarm code from personal ID card
Activate Anti-hijack
Disable Service mode
Enable Service mode
38
S+ 69 VIDEOREG 70 R71 R+ VALIDATOR-
8N SETTING+ SETTING-
FWUPDATE VER LANG
FWUPDATE STOP
Activate video recorder (dashcam)
Disable Hands Free
Enable Hands Free
Reset PIN-to-Drive code by factory buttons Activate FlexibleLogic program,
where N program number Enter configuration via BLE Exit configuration via
BLE Firmware update via internet, where VER firmware version number (can be
written without dots, optional parameter); LANG — firmware language version
(optional parameter): RU / EN / DE, ES / IT. If no any parameter added, then
the latest release version and same language firmware is uploaded.
Stop firmware update via internet
FWUPDATE? MAYAK+ MAYAK-
Request status of firmware updating via internet
Enable periodic connection mode (Beacon mode)
Disable periodic connection mode (Beacon mode)
39
Info commands
Text commands
Function
1
05 REG? 06 GSMPSW? 07 TEL PHONES 09 INFO
Request registered accessories list
Request current GSM PIN code
Request registered master phone numbers
Request GSM signal strength, battery voltage, firmware version status
2, 3, 4
Guest phones
GSM settings commands
Text commands
Function
1
2, Guest 3, 4 phones
0000
0000 GSMPSW
Record new GSM PIN code, where new PIN code
GSMPSW
0050XXXXYYYY 0050 XXXX YYYY
Record new emergency disarm code,
PINXXXXYYYY PIN XXXX YYYY
where XXXX current code; YYYY new code.
0001XYXXX 0001 XY XXX M1XYXXX
M1 XY XXX
Record new 1 phone number, where: X alert call at alarm (1 – On., 0 – Off); Y SMS alert at alarm (1 On, 0 – Off); XXX new phone number in international format
40
0002XYXXX 0002 XY XXX M2 XY XXX
M2XYXXX
0003XYXXX 0003 XY XXX M3XYXXX
M3 XY XXX
0004XYXXX 0004 XY XXX M4XYXXX M4 XY XXX
+75555555555.
1 phone number can not be deleted.
Record new 2 phone number, where:
X alert call at alarm (1 – On., 0 – Off);
Y SMS alert at alarm (1 On, 0 – Off);
XXX new phone number in international format +75555555555.
If XY parameters not entered, then current M2 number will be deleted.
Record new 3 phone number, where:
X alert call at alarm (1 – On., 0 – Off);
Y SMS alert at alarm (1 On, 0 – Off);
XXX new phone number in international format +75555555555.
If XY parameters not entered, then current M3 number will be deleted.
Record new 4 phone number, where:
X alert call at alarm (1 – On., 0 – Off);
Y SMS alert at alarm (1 On, 0 – Off);
XXX new phone number in international format +75555555555.
41
If XY parameters not entered, then current M4 number will be deleted.
ZZZZ9900PINXYXX EmergencychangXinYg M1 phone
X
number:
ZZZZ 9900 PIN XY ZZZZ GSM PIN code;
PIN emergency disarm code;
X alert call at alarm (1 – On., 0 – Off);
Y SMS alert at alarm (1 On, 0
– Off); ZZZZEM1PINXYXX
X
XXX new phone number in
international format
+75555555555.
This command can be sent from any phone number.
009401 2+
Enable all control commands for 2 as for 1
009400 2-
Disable all control commands for 2 as for 1
009500 GUEST+
Enable control commands from guest phone.
009501 GUEST-
Disable control commands from guest phone.
00961 M1PSW+
Enable GSM PIN request for 1
00960 M1PSW-
Disable GSM PIN request for 1
APN?
Request active SIM card APN
42
Record APN for active SIM card, where:
NAME APN name (mandatory parameter);
APN NAME LOGIN LOGIN PSW login and
PSW
password for access (optional
parameters).
If no any parameters entered, then current APN settings will be deleted.
00520
Disable notification on switching to roaming
00521
Enable notification on switching to roaming
00522
Enable notification on switching to roaming with automatic data internet Off
00523
Enable data internet in roaming
00524
Disable data internet in roaming
0069
Setting interval of forwarding all incoming SMS from unregistered numbers and
USSD from cell carrier to M1 phone, where:
X interval in min (1 – 60 min).
External microphone activation
Voice menu command
Function
1
61
Enable interior listening for 4 min or until owner hang up a phone call.
2, 3, 4
Guest phones
Switching SIM cards
Text commands
SIMMAIN X
Function
Record priority SIM card, where: X priority operation SIM card
1
2, 3, Guest 4 phones
43
SIMMAIN? SIMNUM?
0 no priority Sim card, both are equal; 1 1st SIM is main, 2nd SIM card is
supplementary; 2 – 2nd SIM is main, 1st SIM card is supplementary.
Value 1 is set as default.
Request current SIM cards priority
Request operating SIM cards number
Accessories registration
Registration mode is used to pair new remote keys, tags, smartphones and other
wireless and wired accessories to the system main unit.
To prevent unauthorized registration of new accessories, entry to registration
mode is permitted in Disarmed mode only. If Immobilizer mode enabled then
authorization must be passed to fully disarm a system.
! Tags and smartphones shall be registered in one registration cycle. All
previously paired tags and smartphones will be deleted from memory if not
paired again together with the new ones. Up to 9 devices can be registered in
the system main unit in total: 5 tags, 4 smartphones and 4 remote keys.
Entry to accessories registration
1. Disarm security system.
2. Switch ignition Off (if its on).
3. Push service button or external transceiver button 7 times. 44
4. Switch ignition On. 7 LED flashes and 7 beep sounds shall follow.
5. Entry to registration mode will be confirmed with 2 LED flashes and 2 beep
sounds. Wireless tags (transponders) registration 1. Remove battery from a tag
slot.
2. Push and hold tag button and insert battery back in slot observing right
polarity. The tag LED will light up red.
3. Release button and make sure a tag LED serial red flashes come up for 10
seconds. 45
4. Successful registration will be confirmed by a tag LED green flash, 2
service button LED flashes and 2 beep sounds. f a tag failed to register then
its LED will light up red.
5. Repeat items 1-3 for remaining tags. Smartphones registration
1. Enable Bluetooth in smartphone and activate device searching 2. Select
“StarLine S96” in available devices list 3. Enter pairing code 000000 (for iOS
click “Pair”) Remote key registration 1. Push 1 and 2 remote key buttons
shortly
2. In 3 sec successful registration will be confirmed with remote key short
beep, 2 service button LED flashes and 2 sounds. If registration failed, then
4 beep sounds will follow.
46
3. Repeat items 1, 2 for remaining remote keys. Exit from registration mode
System will automatically exit from device registration mode in 5 minutes or
at ignition switch Off.
Exit from registration mode is confirmed with 2 service button LED flashes, 2
sounds and followed with a serial sounds in a number of total registered
accessories. SMS text report with the list of registered accessories will be
sent to M1 phone.
Owner authorization code (PIN-to-Drive)
Pin-to-Drive code entered with factory buttons is used for secondary owner
authorization at disarming and immobilizer mode. Recording and changing
authorization PIN code in registration mode: 1. Disarm system if it is armed
2. Switch ignition Off if it is On
3. Push service button 7 times
47
4. Switch ignition On. 7 LED flashes and 7 beep sounds shall follow.
5. Entry into registration mode will be confirmed with 2 LED flashes and 2
beep sounds.
6. Enter a new PIN code with use of supported factory buttons with 3 sec and
less intervals. Each pushing will be indicated with one LED flash.
Authorization PIN code may consist of 2 to 25 push sequence of factory
buttons. List of supported factory buttons is published at can.starline.ru for
each supported vehicle. If pushing a button is not indicated with a LED flash,
then this button is not supported via CAN bus. 7. Code entry will be confirmed
in 3 sec with 2 LED flashes and 2 beep sounds.
8. Enter a new Pin code once again. 9. Properly repeated new code entry will
be confirmed with 2 LED flashes and 2 beep sounds. Invalid code entry is
followed with 4 LED flashed and 4 sounds, then repeat 5…8 steps. 10. Switch
ignition Off within 10 sec to exit registration mode. 11. Exit from
registration mode will be confirmed with 2 LED flashes and 2 beep sounds.
Deleting authorization PIN code 1. Disarm system if it is armed
48
2. Switch ignition Off if it is On
3. Push service button 7 times
4. Switch ignition On. 7 LED flashes and 7 beep sounds shall follow.
5. Entry into registration mode will be confirmed with 2 LED flashes and 2
sounds.
6. Push service button 3 times. 7. Wait for the long LED light up confirming
existing authorization that PIN code has been deleted. 8. Switch ignition Off.
9. Exit from registration mode will be confirmed with 2 LED flashed and 2 beep
sounds.
Emergency disarming
System can be fully disarmed with emergency disarm code, indicated on owner ID
card, when:
49
tag is lost tag or remote key battery discharged mobile App and M1 phone not
available Anti-hijack mode activated
Emergency disarming with service button 1. Make sure ignition is switched Off.
2. Push service button or external transceiver button a number of times,
equal to the first digit of emergency disarm code.
3. Each digit entry will be confirmed within 3 sec with service button LED
flashes in a number equal to a sequence number of corresponding digit entered
(1,2, 3 or 4 times). 4. Repeat 1…2 steps for remaining digits. 5. Valid code
entry will be confirmed with 3 flashes and 3 sounds, system shall disarm.
If invalid emergency disarm code is entered 3 times, then next entry shall be
blocked for 15 min. Owner will be alerted with text message.
50
Each button push in this interval will be indicated with 5 flashes. Sample
code 5342 entry with service button
Emergency disarming with SMS text message Send SMS text command 30 XXXX. where
XXX emergency disarm code from ID card Changing emergency disarm code with
service button (or external transceiver button) 1. Switch system in disarmed
mode if it is armed. 2. Push service button 4 times. 3. Switch ignition On. 4
LED flashes and 4 sounds shall follow. 4. Entry into code recording will be
confirmed with 2 LED flashes and 2 sounds.
If nothing is done withing 5 sec system shall turn off from emergency code
recording mode. 5. Switch ignition Off. 6. Switch ignition On and push service
button a number of times equal to a first digit of existing emergency disarm
code. 7. Switch ignition Off. Each digit entry will be confirmed with LED
flashes equal to a sequence number of corresponding digit entered (1,2, 3 or 4
times). 8. Repeat 6…7 steps for remaining digits. 9. Valid existing code entry
will be confirmed with 2 LED flashes and 2 beep sounds. 10. Switch ignition
On. Push service button a number of times equal to a first digit of a new
emergency disarm code. 11. Switch ignition Off. Each digit entry will be
confirmed with LED flashes equal to a
51
sequence number of corresponding digit entered (1,2, 3 or 4 times). 12. Repeat
10…12 steps for remaining new code digits. 13. A new code entry will be
confirmed with 2 LED flashes and 2 beep sounds. 14. Enter a new code once
again repeating 10…12 steps. 15. New emergency disarm code recording will be
confirmed with 2 LED flashes and 2 beep sounds.
Optional accessories
BT-6 wireless tag (transponder)
Short range 1-way remote control on a short distance 10-15 m approx Radio
operation range 2.4 GHz Bluetooth Low Energy Button for arming / disarming /
switching operation mode / engine start / stop LED indicator Buil-in
accelerometer Battery CR2032 3V Waterproof shockproof casing
2-way LCD remote key
2-way radio remote control on a distance up to 2000 m Radio operation range
868 MHz 4 control buttons (see functions in instruction manual) LCD display
Built-in buzzer and vibration drive Battery LR43 (AAA) 1.5V RFTM 868 external
transceiver
External transceiver module for communication with optional 2-way remote
control key Radio operation range 868 MHz Led indicator Built-in service
button Wire with connector to plug into main unit service button input
MIC-6 external microphone
Remote listening of vehicle interior via voice call
EC-1 touch sensor
Capacitive sensor to perform Hands Free functionality by touching a door
handle when tag is in range and emergency disarm code entry in Beach mode. MS-
06BT wireless sensor
Wireless magnetic sensor with reed switch to secure camper, van doors,
windows, roof racks etc. Radio operation range 2.4 GHz Bluetooth Low Energy
Built-in LED and button Built-in accelerometer and temperature sensor Battery
CR2450 3V
52
R6 wireless service module Wireless service module for engine blocking, siren
and hood lock control Radio operation range 2.4 GHz Bluetooth Low Energy
Built-in accelerometer Built-in relays for engine blocking (10A) and hood lock
control (12A) Input for engine temperature sensor (included in delivery set)
Input for hood trigger switch Ignition input Stand-alone mode Waterproof
shockproof casing R6 Eco wireless relay module Wireless service module for
engine blocking and custom functionality Radio operation range 2.4 GHz
Bluetooth Low Energy Input power 5…12V, can be powered from engine sensors
circuit Built-in accelerometer Built-in relays for engine blocking (0.5A) and
other custom functionality Programmable outputs Stand-alone mode Waterproof
shrink tube casing Start 6 mini relay module Relay module for remote engine
start power circuits activation Built-in relays for IGN1, IGN2, ACC, Starter 2
relays with full contact groups for starter protection, engine blocking and
other custom functionality BP-06 immobilizer bypass module Digital module to
perform remote start with factory immobilizer bypass with use of factory key
or transponder inside Analogue and data bus control Built-in 3.3V power supply
for Smart Keys
53
Warranty terms
Warranty repair and replace is carried out by StarLine authorized dealers and
service centers. Warranty period is 3 years beginning from the date of
purchase. Service life is 5 years providing device is installed, configured
and used according to the present instruction manual and connection diagram
recommendations. Warranty period for the optional accessories, i.e. relay
modules, sirens, wireless sensors, immobilizer bypass modules, temperature
sensors is 1 years from the date of purchase. Warranty does not apply to
batteries and installation accessories attached in deliver set.
Warranty is valid providing following conditions met: system is installed by
qualified approved installer present instruction requirements, especially
safety precautions are strictly followed attached warranty certificate is
properly filled up
Free of charge warranty repair or replace is void in case of: warranty period
is expired mechanical damage of security system main unit housing, circuit
board, wire harness and other parts and accessories traces of unauthorized
dismantling and repair attempts visible damages caused by a non-qualified
installation other damages caused by external factors, i.e. fire, exceeding
operating temperature range, water and aggressive fluids ingress, careless
treatment etc.
Maintenance and repair of security system with expired or void warranty is
carried out by by any of approved or non-authorized service centers on a
customer expense.
Purchase certificate Model
Serial number
Date of purchase
“” ____ 20___
Reseller name, address, stamp and signature
54
Installation certificate I, the undersigned
name, position
professional installer herein certify that above specified security system is
properly installed and configured by me in full accordance with the manual,
connection diagram and other related officially published recommendations of
the manufacturer. Car specification Make __
Model_____ VIN number
__ Installer name,
address, stamp and signature
Customer name and signature
Date of installation “” ____ 20_
Approvals
StarLine S9 vehicle security system conforms the relevant international
regulations Electromagnetic compatibility directive 2014/30 EU UNECE vehicles
and parts regulations R116 (VSS) and R10 (EMC)
The manufacturer reserves the right to modify and improve the product design
and technical features without prior notice. Manufacturer
ScPA StarLine Ltd
9 A Komissara Smirnova str. 194044, Saint-Petersburg, Russian Federation
www.alarmstarline.com
55