ProsKit SS-596 Solder Smoke Absorber User Manual
- June 1, 2024
- ProsKit
Table of Contents
ProsKit SS-596 Solder Smoke Absorber
1st Edition, 2024 ©2024 Copyright by Prokit’s Industries Co., Ltd.
SS-596 Solder Smoke Absorber is a portable and desktop smoke eater, easy to place and move, low noise and long-life service. It is designed to absorb potentially harmful contaminants that are released with the smoke while soldering for protect the health of operators. with a high-performance fan and an activated carbon filter designed to absorb flux and lead fumes. The combination of silicone smoke hood and corrugated pipe facilitates directional adjustment and improves smoke removal efficiency.
Safety Note
- The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Please check this purifier before starting up, confirm if the accessories are complete, and confirm that the voltage is within the required usable range
Warning
- If the product is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
- Please make sure smoke absorber is disconnected with the power supply before taking off the protective apparatus.
Specification
| Model | SS-596F | SS-596G | SS-596A |
|---|---|---|---|
| Working voltage | DC12V | ||
| Power | 15W | ||
| Maximum inhalation volume | 90 L /min | ||
| Noise | ＜60dB | ||
| Fan speed | 10-100 (digital setting) | ||
| Display method | LED (white light) |
Plug*
|
5SS-596-ADF
| 5SS-596-ADG| 5SS-596-ADA
Adapter| Input :100V-240V 50/60Hz 0.8A Output :12VDC 2.0A 24W
Accessory
| Primary Filter Cotton x3 5SS-596-F1
Silicone Smoke Hood x1 Corrugated pipe(Φ64x210mm) x1 Air guide board x1
Size| 205x250x90mm（Excluding Corrugated pipe）
Weight （Approx）| 1.35kg
Adapters correspond to different plug models: 5SS-596-ADF/5SS-596-ADG/5SS-596-ADA
Features
- Equipped with a multi-layer filtration system designed for rapid purification, making it ideal for soldering and maintenance applications.
- Compact in size, with a multilayer filter, and powerful airflow.
- Adjustable fan speeds, ranging from 10 to 100, with LED display indicating the current fan speed setting.
- With a flexible hose that can be easily adjusted in terms of length and angle.
- The air purifier operates on low voltage, ensuring both safety and reliability in use.
- Multifunctional in different purposes: filters smoke, dust and odor from soldering work or other conditions.
Filters Specifications
| Model | Material | Position | Size | Function | Replacement recommendation |
|---|---|---|---|---|---|
| 5SS-596-F1 | cotton | First layer | 175x175x5mm | Dust filter | every 14-30days |
| 5SS-596-F2 | HEPA | Middle layer | 175x175x15mm | PM2.5 filter | every 6-12 months |
| 5SS-596-F3 | Activated carbon | Third layer | 175x175x10mm | Odor filter | every |
6-12months
Operating Instruction
How to assemble
After unpacking, assemble according to the product diagram below.
- smoke hood assemble: put one end of the Corrugated pipe with the smoke hood, and squeeze till tight.
- Corrugated pipe assembles: Align another end of the Corrugated pipe to the host interface, and tight it clockwise or anticlockwise.
- How to assemble the air guide board：
- Bend the two ends of the air guide by 90°as shown in the drawing.
- Slide the guide all the way down the grooves at the back of the main station.
How to use
- Input voltage: equipped with an adaptor (input: 12V )
- Press the knob to turn on the power and LED will display. Adjust the fan speed from 10 to 100 by turning the knob. Long press the knob to turn off.
- When replacing the filter cotton, open the buckles on both sides and replace the corresponding model of filter cotton (See the Filters Specifications table for the model).
Troubleshooting
Warning
Disconnect the power plug before servicing. Failure to do so may result in
electric shock. If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in order to
avoid personal injury or damage to the unit.
| Faults | Solution |
|---|---|
| No power | 1. Check the power adapter, and replace the product of the same |
specification if damaged.
2. Please check whether the power plug is well connected.
No LED display| 1. The power supply is not connected correctly, Refer to “No power” for troubleshooting.
2. If not, the LED display is damaged, return the dealer for maintenance.
Unable to adjust the air volume| 1. The circuit device is damaged, return the
dealer for maintenance.
Bad of smoking filter effect| 1. Filter cotton is blocked, please check the
condition of the filter, refer to the “Replacement recommendation”.
PROKIT’S INDUSTRIES CO., LTD
- http://www.prokits.com.tw
- Email: pk@mail.prokits.com.tw
- 2024Prokit’s Industries Co., LTD. All rights reserved 2024001(C)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>