Elna 202-156-004 Invisible Zipper Foot Sewing Machines Instructions
- June 13, 2024
- Elna
Table of Contents
Elna 202-156-004 Invisible Zipper Foot Sewing Machines
Product Information
The Invisible Zipper Foot (Ref: 202-156-004) is a specialized accessory for sewing machines. It is designed to attach and sew invisible zippers onto garments. The foot ensures precise stitching and a professional finish.
Product Usage Instructions
Caution: Before replacing the foot or attaching a binder, make sure to press the Lockout key. For models without the Lockout key, turn off the power switch when attaching or detaching the foot and binder. Refer to your machine’s instruction manual for accessory attachment and removal information.
Attention: Set your machine settings as follows:
- Stitch: Straight stitch (Center needle position)
- Thread tension: Auto or 3 – 5
- Stitch length: 1.5 – 2
- Stitch width: 0
Caution
- Make sure to press the Lockout key when replacing the foot or attaching a binder.
- For models without the Lockout key, turn the power switch off when attaching and detaching the foot and binder.
- Please refer to your machine’s instruction manual for accessory attachment and removal information.
Machine settings
- Stitch: Straight stitch (Center needle position)
- Thread tension: “Auto” or 3 – 5
- Stitch length: 1.5 – 2
- Stitch width: 0
INSTALLATION
- Baste along the zipper opening. Prepare an invisible zipper 2 cm longer than the actual opening size.
- Baste the zipper tape on the garment before machine stitching.
- Pull out the center basting threads and open the invisible zipper. Sew the right and left sides of the zipper to the ends of the zipperopening by using the invisible zipper foot.
Ref: 202-156-004
Elna International Corp. SA / 13.04.2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>