STOLTZEN SOLVERA 18G HDMI Manager Instruction Manual
- June 13, 2024
- STOLTZEN
Table of Contents
**STOLTZEN SOLVERA 18G HDMI Manager Instruction Manual
**
Product Introduction
From the latin word Solvere (to solve) we bring you Stoltzen SOLVERA.
Made to ease installation tangles, this little wonder is packed with a series
of smart features.
EDID Manager
HDCP Manager
5V Manager
CEC Blocker
Supports up to 4K@60 4:4:4 and HDCP2.2. The product is powered by HDMI or
USB-C and contains CEC block switch and support autodownscaling.
Specifications
Video Input
Input| 1x HDMI 2.0
Input Connector| 1x Female type-A HDMI
HDMI Input Resolution| Up to 4K@60 4:4:4
Video Output
Output| 1x HDMI 2.0
Output Connector| 1x Female type-A HDMI
HDMI Output Resolution| Up to 4K@60 4:4:4
General
Bandwidth| 18Gbps
Power Supply| 5V 1A
Power Consumption| 2.4W(MAX)
Dimension (WHD)| 54x18x60mm
Net Weight| 85g
Feature
- 18G HDMI 2.0 4K@60 4:4:4 HDCP2.2
- Supports EDID & HDCP manager.
- Powered by HDMI or USB-C
- Turn off 5V when source without TMDS
- CEC block switch.
Package
- 1x SOLVERA
- 1x User Manual
Panel Description
- Power LED: The LED indicates green when power on.
- HDMI IN: HDMI2.0 input, connect to source.
- DIP Switch: 4-pin dip switch for EDID and HDCP management.
- USB-C: USB-C is used to power the machine, upload EDID and firmware upgrade.
- CEC Switch: Turn on/off the CEC
- HDMI OUT: HDMI 2.0 output, connect to display
EDID&HDCP management
Predefined EDID Setting
| Switch | Resolution | Audio |
|---|---|---|
| 000 | Passthrough | |
| 001 | 1080p | LPCM |
| 010 | 1080p | DTS/Dolby |
| 011 | 3840×2160@30Hz HDR | LPCM |
| 100 | 3840×2160@30Hz HDR | DTS/Dolby |
| 101 | 3840×2160@60Hz HDR | LPCM |
| 110 | 3840×2160@60Hz HDR | DTS/Dolby |
| 111 | User defined EDID |
User Defined EDID Setting
-
Rename the user defined EDID according the following format: 0803C000.DAT
-
Connect the machine to the PC with USB cable, the PC will automatically detect a Udisk named of “BOOTDISK”.
-
Copy the EDID file into the U-disk, and then open the U-disk. If there is a SUCCESS.
TXT file, it means that the EDID upload is successful. -
Remove the USB cable, connect the adapter to power on the machine.
Firmware Upgrade
- Rename the upgrade file according the following format: 08009000.APP
- Disconnect the HDMI and connect the SOLVERA to the PC with USB cable, the PC will detect a U-disk named “BOOTDISK”.
- Copy the file into the U-disk, and then open the U-disk. If there is a SUCCESS.TXT file, upgrade is successful, and if there is an UNKNOW.TXT file, it means it failed. When doing FW update, do not use dockings, hubs or other devices between SOLVERA and HOST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>