STOLTZEN SB60 Premium 2.1 CH Soundbar With Deep Bass User Manual
- June 13, 2024
- STOLTZEN
Table of Contents
User Manual
Premium 2.1 CH soundbar with Deep bass
All Rights Reserved
Version: SOUNDBAR_2022V1.0
PLEASE READ THIS PRODUCT MANUAL CAREFULLY BEFORE USING THIS PRODUCT.
This manual is only for operational instruction only, and is not to be used in
a maintenance capacity. The functions described in this version are current as
at June 2022. Any changes of functions and operational parameters will be
updated in future manual versions. Please refer to your dealer for the latest
product details. Version 1.0 10/06/22
SAFETY OPERATION GUIDE
**** In order to guarantee the reliable operation of the equipment and safety of the user, please abide by the following procedures during installation, use and maintenance:
- The system must be earthed properly. Please do not use two blade plugs and ensure the AC power supply ranges from 100v to 240v and from 50Hz to 60Hz.
- Do not install the units in an environment where they will be exposed to extreme hot or cold temperatures.
- These units will generate heat during operation, please ensure that you allow adequate ventilation to ensure reliable operation.
- Please disconnect the units from mains power if they will be left unused for a long time.
- Please DO NOT try to open the casing of the equipment, DO NOT attempt to repair the unit. Opening the unit will void the warranty. There are high voltage components in the unit and attempting to repair the unit could result in serious injury.
- Do not allow the unit to come into contact with any liquid as that could result in personal injury and product failure.
Introduction
1.1 Introduction to the soundbar
Thank you for purchasing this soundbar , a 2.1 Deep Bass (soundbar and in-
built woofer) which is designed to bring an extraordinary sound experience to
your home entertainment system.
We encourage you to take a few minutes to read through this manual, which
describes the product and includes step-by-step instructions for setting up
and getting started.
1.2 Key features
- Premium 2.1 CH 60 Watt
- Immersive sound experience
- DSP for audio optimisation
- Deep Bass built in
- Versitile inputs (USB, Optical, Aux, ARC, Bluetooth)
- Music, Movie and News EQ modes
- 3low profile angled cables included
- Wall mount
Note: Please confirm if the product and the accessories are all included,
if not, please contact your dealer.
1.3 What is in the box
- 1x soundbar
- 1x power adapter (DC 24V 2A)
- 1x IR remote control
- 3x angled adapter cables
- 2x mounting brackets
- 6xscrews
- 1x manual
1.4 Product overview
Front Panel:
| 1 | LED | To indicate the selected source or turn red when power is connected |
|---|---|---|
| 2 | IR Receiver | To receive the IR commands from IR Remote Control |
Rear Panel:
| 3 | USB | Connect to a USB storage device for audio play back |
|---|---|---|
| 4 | AUX | Connect to the auxiliary output on your source device |
| 5 | HDMI ARC | Connect to the HDMI (ARC) port on a TV |
| 6 | OPT | Connect to the optical output on your TV or digital source |
| 7 | DC IN | Connect to the supplied 24V DC power supply |
Control:
8| Volume(-)| Decreases the volume
Press and hold to decrease the volume continuously
---|---|---
9| Source| Select a sound source: USB, AUX, HDMI ARC, OPT or Bluetooth
(default)
10| Power| Switchs between or standby
11| Volume(+)| Increases the volume
Press and hold to Increase the volume continuously
IR remote control
How to Use the Remote Control
- Switch on or to standby
- Select the sources
- Select the previous / next track
- Increase/decrease the volume
- Play or pause
- Music/Movie/News EQ mode selection
- Mute button
- To disable the LED Indicator.
- Treble adjustment
- Bass adjustment
Installation of batteries
- Open the backshell of the Remote Control
- Install 2 AAA batterries in the battery compartment
(Make sure the polarity of the batteries is correct )
NOTE: Remove the batteries if you do not plan to use the Remote Control for an extended period of time or for long term storage.
Connecting the soundbar
Connecting to a TV via HDMI ARC
An HDMI connection supports digital audio and video with a single
connection. HDMI connectivity is the recommended option for your soundbar.
- Press the power button to switch on. Press the source button on the right side of the Soundbar or the (Source) button on the remote control to select the “ARC” mode.
- Connect the soundbar to your TV with an good quality HDMI cable.
- On your TV menu, check that HDMI ARC has been enabled. Refer to the owner’s manual of your TV for more information.
- If there is no sound, check the HDMI cable connection. Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
NOTES:
– This function is not available if your TV does not support ARC.
— Contact your TV manufacturer if you have problems with the HOMI
ARCcompatibility.
Connecting via Bluetooth
Through Bluetooth, connect the soundbar with your Bluetooth device, such as a
smartphone, tablet and laptop
- Press the power button to switch on. Press the source button on the right of the Soundbar or the (Source) button on the remote control to select the “Bluetooth” mode.
- On your Bluetooth device, enable Bluetooth and search for “the soundbar ” within three minutes. An audible tone is heard(Bluetooth connected).
- Your Bluetooth device is retained as a paired device when the soundbar goes to standby mode. Next time you switch to the Bluetooth source, the soundbar reconnects the last paired device automatically.
NOTES:
– The Bluetooth connection will be lost if the distance between the soundbar
and the Bluetooth device exceeds 33 ft (10 m).
– Electronic devices may cause radio interference. Devices that generate
electromagnetic waves must be kept away from the Soundbar, such as microwaves
and wireless LAN devices.
Connecting to other devices(Set-top box , Blu-ray player , Blu-ray DVD, PC)
Connecting via Optical
Connect the soundbar
with your device (Set-top box, Blu-ray player, Blu-ray DVD,PC) by using an
optical cable (included).
Connecting via Auxiliary Input
Through the AUX input, connect the soundbar with your device (Set-top box.
Blu-ray player, Blu-ray DVD,PC).
- Press the power button to switch on. Press the source button on the right of the Soundbar or the (Source) button on the remote control to select the “AUX” mode.
- Connect the soundbar with your device by using a 3.5mm cable (included).
PLACEMENT
Desktop placement
Place the soundbar on a flat and stable surface.
NOTE:
– Do not place any objects on the top of the soundbar.
Wall mounting
Installation Precautions
- Install on a vertical wall only.
- Do not install in a place with high temperature or humidity.
- Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation fixing point.
- Connect cables from the unit to external devices before you install the Soundbar
- Unit can be mounted via the keyhole mounting brackets on the rear of the soundbar
- Tospace the soundbar off the wall, please use the supplied mounting brackets
Wall Mount Using the Supplied Brackets
Product specifications
General specification:
- 2.1ch soundbar with built-in woofer
- Power supply: OC 24V -2A
- Total speaker power output (Max. @THD 1%): 60 W
- Output power (Max. @THD 5%): 2 x 15 W +30W
- Max operating distance:10m
- Transducer: 2 x 2″full-range drivers(8Ohm) + 2 x 2.5″ woofers(8Ohm)
- Soundbar standby power: <0.5 W
- Operating temperature: 0°C – 45 °C
- Dimensions (W x H x D): 900 x 92 x 70 mm
HDMI specification:
- HDMI ARC: 1
- HDMI version: 1.4
Audio specification:
- Frequency response: 50 Hz – 20 KHz
- Audio inputs: Optical, Bluetooth, USB, HDMI ARC , Auxiliary
USB specification:
- USB port: Type A
- USB rating: 5VDC/0.5A
- Supported file format: MP3, WAV
- MP3 Codec: CBR/VBR
- MP3 sampling rate: 8 – 48 KHz
- MP3 bitrate: 8 – 320 kbps
- WAV sample rate: 8- 48 KHz
- WAV bitrate: 5-384kbps
Wireless specification:
- Bluetooth version: V5.0
- Bluetooth profile: AZDP V1.2
- Bluetooth frequency range: 2402 MHz -2480MHz
- Bluetooth Maximum transmitting distance:t0m
- Bluetooth name: soundbar 900
Trouble shooting
- Never try to repair the product yourself. If you have problems using this product, check the following points before you request service.
System, the unit is not turn on
- Check if the power cord is plugged into power and the soundbar.
No sound from the soundbar
- Make sure that the soundbar is not muted.
- Select the correct audio input source on the remote control.
- Connect the soundbar to your TV or other devices properly
Distorted sound or echo
- If you play audio from your TV through the soundbar, make sure that your TV is muted or the built-in TV speaker is disabled.
Remote control
The remote control does not work.
- Check if the batteries are drained. If so, replace them with new ones.
- Reduce the distance and angle between the remote control and the main unit
Bluetooth
A device cannot be connected with the soundbar.
- Check if you have enabled Bluetooth on the device.
- If the soundbar has been paired with another Bluetooth device, reset Bluetooth
- If your Bluetooth device has ever been paired with the soundbar, reset Bluetooth on the soundbar, unpair the soundbar on the Bluetooth device, and then, pair the Bluetooth device with the soundbar again Poor audio quality from a connected Bluetooth device
- The Bluetooth reception is poor. Move the source device closer to the soundbar, or remove any obstacle between the source device and the soundbar.
The connected Bluetooth device connects and disconnects constantly.
- The Bluetooth reception is poor. Move the source device closer to the soundbar, or remove any obstacle between the source device and the soundbar.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.