Danfoss 013G1246 Aero RA Click Thermostatic Sensor Installation Guide
- June 1, 2024
- Danfoss
Table of Contents
Danfoss 013G1246 Aero RA Click Thermostatic Sensor
Specifications:
- Model : AN446460053611en-000102
- Max Capacity : 4
- Min Capacity : 2
- Product Codes : 013G1246, 013G1236, 013G5245
- Blind Markings: Blinde markierung, Marque aveugle, Marca ciega
Product Usage Instructions
Installation Guide:
- Step 1 : [Detailed installation step 1]
- Step 2 : [Detailed installation step 2]
- Step 3 : [Detailed installation step 3]
Configuration Settings:
Ensure the MAX capacity is set to 4 and MIN capacity is set to 2 for optimal performance.
Product Codes:
Refer to the following product codes for identification: 013G1246, 013G1236, 013G5245
Blind Markings:
Identify the blind markings on the product for reference: Blinde markierung, Marque aveugle, Marca ciega
Installation
BIV Installation
Uninstall
Temperature Limitation
Theft protection
Theft protection (Removal)
Blind mark 
Any information, including, but not limited to information on the selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals,
catalogs descriptions, advertisements, etc. and whether made available in
writing, orally, electronically, online or via download, shall be considered
informative and is only binding if and to the
extent, explicit reference is made in a quotation or order confirmation.
Danfoss cannot accept any responsibility for possible errors in catalogs,
brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or
function of the product.
All trademarks in this material are property of Danfoss A/5 or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All rights reserved.
Climate Solutions
- danfoss.com
- +45 7488 2222
FAQS
Q: What is the maximum capacity of the product?
A: The maximum capacity is 4 units.
Q: What are the recommended configuration settings?
A: It is recommended to set the MAX capacity to 4 and MIN capacity to 2.
Q: How do I identify the product using the codes?
A: The product can be identified using the following codes: 013G1246, 013G1236, 013G5245.
Q: What do the blind markings signify?
A: The blind markings serve as identification markers and include Blinde marketing, Marque aveugle, Marca ciega.