1000TM Sixbar Elation Professional Europe LED TV User Manual

: June 17, 2024
: ELATION PROFESSIONAL

Table of Contents

user manual
DOCUM EN TVERSION
GENERAL INFO RM ATION
SA FETY INSTRUCTIONS
FIXTURE OVERVIEW
FIXTURE INSTALLATION
DMX CHANNEL FUNCTIONS AND VALUES
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
PHOTOMETRIC DATA
DIMENSIONAL DRAWINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

1000TM Sixbar Elation Professional Europe LED TV

Specifications

Manufacturer: Elation
Model: SIXBAR 1000TM
Document Software Version: 1.06
DMX Channel Modes: 6 / 7 / 11 / 13 / 36 / 72 / 75 / 79

Product Information
The SIXBAR 1000TM is an innovative and reliable lighting fixture designed to provide years of reliable performance. Please read and understand the instructions in this manual carefully before operating the unit to ensure safety and proper maintenance.

Box Contents

(1) powerCON Cable
(1) Frost Filter
(1) Glare Shield
(3) Frost Filter/Glare Shield Mounting Screws
Manual & Warranty Card

Contact Information

ELATION SERVICE USA:

Voice: 323-582-3322
Fax: 323-832-9142
Email: support@elationlighting.com

ELATION SERVICE EUROPE

Voice: +31 45 546 85 30
Fax: +31 45 546 85 96
Email: support@elationlighting.eu

Safety Instructions
The SIXBAR 1000TM is an extremely sophisticated piece of electronic equipment. To ensure smooth operation and prevent damages, it is important to follow the safety guidelines in this manual. The manufacturer will not accept responsibility for damages resulting from the misuse of this fixture due to disregarding the information provided.

General Guidelines

Follow these general guidelines to ensure safe and proper usage of the SIXBAR 1000TM:

Read and understand the user manual before operating the fixture.
Do not attempt any repairs yourself as it may void the warranty.
Avoid modifications to the fixture that may compromise safety.

Fixture Overview

The SIXBAR 1000TM is a versatile lighting fixture that offers a wide range of lighting effects. Familiarize yourself with the various components and features of the fixture:

user manual

©2015 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ELATION brands and product names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

DOCUM EN TVERSION

Please check www.elationlighting.com for the latest revision/update of this manual.

Date

| ****

Document Version

| ****

Software Version

| DMX

Channel Modes

| ****

Notes

---|---|---|---|---
3/2015| 1| ≥1.06| 6 / 7 / 11 / 13 / 36 / 72 / 75 / 79| Initial release.
General Information| 4
---|---
Warranty| 6
Safety Instructions| 7
General Guidelines| 8
Fixture Overview| 9
Fixture Installation| 10
Understanding DMX| 12
Fixture Menu| 16
DMX Channel Functions And Values| 22
Cleaning and Maintenance| 32
Technical Specifications| 33
Optional Accessories| 35

GENERAL INFO RM ATION

INTRODUCTION
Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! The SIXBAR 1000™ has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use and maintenance.

UNPACKING
Thank you for purchasing the SIXBAR 1000™ by Elation Professional®. Every SIXBAR 1000™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this unit to your dealer without first contacting customer support at the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.

BOX CONTENTS

(1) powerCON Cable
(1) Frost Filter
(1) Glare Shield
(3) Frost Filter/Glare Shield Mounting Screws
Manual & Warranty Card

CUSTOMER SUPPORT
Elation Professional® provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.elationlighting.com for any comments or suggestions. For service related issue please contact Elation Professional®.
ELATION SERVICE USA – Monday – Friday 8:00am to 5:00pm PST
Voice: 323-582-3322 Fax: 323-832-9142
E-mail: support@elationlighting.com

ELATION SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: support@elationlighting.eu

WARRANTY REGISTRATION
Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support.

I M P O R TA N T N OTICE!

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. Damages resulting from modifications to this fixture and/or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and/or repairs.

Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free of manufacturing defects in material and workmanship for a period of two years (730 days), and Elation Professional® product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months (180 days), from the original date of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
For warranty service, send the product only to the Elation Professional® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated point within the United States. If any product is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof.
This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in any manner which Elation Professional® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Elation Professional® factory unless prior written authorization was issued to purchaser by Elation Professional®; if the product is damaged because not properly maintained as set forth in the product instructions, guidelines and/or user manual.
This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-up. During the periods as specified above, Elation Professional® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation Professional® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professional®. All products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that effect.
Elation Professional® reserves the right to make changes in design and/or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by Elation Professional® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product.
This warranty is the only written warranty applicable to Elation Professional® products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

SA FETY INSTRUCTIONS

$1000TM-Sixbar-Elation-Professional-Europe-LE-TV- $2$$ For proper operation, follow the Installation guidelines described in this manual. Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts (brackets) included with this fixture should be used for installation. Any modifications will void the original manufactures warranty and increase the risk of damage and/or personal injury.
Never look directly into the light source of this fixture to prevent risk of injury to your retina, which may induce blindness. Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times.
The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between this fixture and other devices or a wall for proper cooling.
Always disconnect from main power source before performing any type of service and/or cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating.

GENERAL GUIDE LINES

During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time.
This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS ONLY on stage, in nightclubs, theatres, etc.
Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating, to prevent any fire hazard.
The fixture must be installed in a location with adequate ventilation, at least 1.5 feet (.5m) from adjacent surfaces. Be sure no air ventilation slots are blocked.
DO NOT attempt installation and/or operation without knowledge how to do so.
DO NOT permit operation by persons who are not qualified to operate this type of fixture. Most damages are the result of operations by nonprofessionals.
Consistent operational breaks may ensure the fixture will function properly for many years to come.
DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended environment, always use mounting hardware that is no less than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the bracket of the fixture.
Use the original packaging and materials to transport the fixture in for service.
DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving.

FIXTURE OVERVIEW

3pin DMX IN
powerCON IN
RJ45 NET IN
LCD Menu Control Display
powerCON OUT
3pin DMX OUT
5pin DMX IN
FUSE
RJ45 NET OUT
Mode Button
UP Button
DOWN Button
ENTER Button
.5pin DMX OUT

FIXTURE INSTALLATION

FLAMMABLE MATERIAL WARNING Keep fixture at least 5.0 ft. (1.5m) away from any flammable materials, decorations, pyrotechnics, etc
ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.

CAUTIONS

For added protection, mount the fixture in areas outside walking paths, seating areas, or in areas were unauthorized personnel might reach the fixture.
Ambient operating temperature range for this fixture is 5°F to 113°F (-15°C to 45°C). Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation area can hold a minimum point load of 10 times the weight of the fixture. (160 lbs / 73 kg)
Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or servicing.

POWER LINKING
Max number of units that can be power linked is 6 units @110V and 15 units @240V.

CLAMP MOUNTING
The SIXBAR 1000™ includes integrated dual floor stand/rigging yokes. When mounting this fixture to truss be sure to secure an appropriately rated clamps to the yokes using a M10 screw fitted through the center hole.

MOUNTING POINTS
Overhead mounting requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury.

Fixture is fully operational in the specific mounting positions as illustrated below.

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-2

SAFETY CABLE

Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails.

UNDERSTANDING DM X
DMX-512
DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers. DMX allows all makes and models of different manufactures to be linked together and operate from a single controller. This is possible as long as all the fixtures and the controller are DMX compliant. A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light. DMX data is sent out as serial data that travels from fixture to fixture via data “IN” and data “OUT” XLR terminals located on the fixtures (most controllers will only have output jacks).

DMX LINKING
To ensure proper DMX data transmission, always use proper DMX cables and a terminator. When using several DMX fixtures try to use the shortest cable path possible. Never split a DMX line with a “Y” style connector. The order in which the fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a starting DMX address of 1 may be placed anywhere in the DMX chain, at the beginning, at the end, or anywhere in the middle. The DMX controller knows to send data assigned to address 1 to that fixture no matter where it is located in the DMX chain. The SIXBAR 1000™ can be controlled via DMX-512 protocol and the DMX address is set via the control menu.

DATA CABLE (DMX Cable) REQUIREMENTS (For DMX and Master/Slave Operation) Your fixture and your DMX controller require a standard 3pin or 5pin XLR connector for data input and data output (see figure below). If you are making your own cables, be sure to use two conductor, shielded digital DMX cable rated at 120 ohms; this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers. Your cables should be made with a male and female XLR connector on either end of the cable. Also, remember that a DMX line must be daisy chained and cannot be split, unless using an approved DMX splitter such as Elation’s Opto Branch 4™, Opto Branch 8™, or DMX-Branch/4™.

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-3 Be sure to follow the above figure when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing. Grounding the shield could cause a short circuit and erratic behavior.

DMX-512 CONTROLLER CONNECTION
Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the SIXBAR 1000™. The diagram below illustrates a typical DMX-512 connection when the fixture is in the 79 Channel Mode. You can chain multiple panels together through serial linking. The cable that should be used is two conductor, shielded DMX cable with XLR input and output connectors. Always be sure daisy chain your in and out data connections, never split or “Y” your DMX connections unless you are using an approved DMX splitter such as Elation’s Opto Branch 4™, Opto Branch 8™, or DMX-Branch/4™.

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-4

DMX-512 CONNECTION WITH DMX TERMINATOR
A DMX terminator should be used in all DMX lines especially in longer runs. The use of a terminator may avoid erratic behavior in your DMX line. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line. Using a line terminator will decrease the possibilities of erratic behavior.

$1000TM-Sixbar-Elation-Professional-Europe-LE-TV- $7$$

5pin XLR DMX CONNECTORS
Some manufactures use 5pin XLR connectors for DATA transmission in place of 3pin. 5pin XLR fixtures may be implemented in a 3pin XLR DMX line. When inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The following chart details a proper cable conversion.

1000TM-Sixbar-Elation-Professional-Europe-LE-TV- 13 DMX ADDRESSING
All fixtures should be given a DMX starting address when using a DMX controller, so the correct fixture responds to the correct control signal. This digital starting address is the channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture.
You can set the same starting address for all fixtures or a group of fixtures, or set different address for each individual fixture. Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion, in other words, changing the settings of one channel will affect all the fixtures simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen” to the channel number you have set, based on the quantity of control channels (DMX channels) of each fixture. That means changing the settings of one channel will only affect the selected fixture.

In the case of the SIXBAR 1000™, when in the 79 Channel Mode you should set the starting DMX address of the first unit to 1, the second unit to 80 (1 + 79), the third unit to 159 (80 + 79), and so on.
Note: During start-up the SIXBAR 1000™ will automatically detect whether a DMX data signal is being received or not. If the fixture is not receiving a DMX signal please check the following:

The 3pin or 5pin XLR input plug (cable with DMX signal from controller) is not connected or is not inserted completely into the DMX input jack of the fixture.
The DMX controller is switched off or defective.
The DMX cable or connector is defective.
A DMX terminator has been inserted into the last fixture in your DMX chain.

FIX TU RE M ENU

ON-BOARD SYSTEM MENU
The SIXBAR 1000™ comes with an easy to navigate system menu. The next section will detail the functions of each command in the system menu.

LCD MENU CONTROL PANEL
The control panel (see image below) located on the top of the fixture allows you to access the main menu and make all necessary adjustments to the SIXBAR 1000™. During normal operation, pressing MODE button once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the UP, and DOWN buttons. Once you reach a field that requires adjusting, press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting. You may exit the main menu at any time without making any adjustments by pressing the MODE button.
NOTE: the LCD Menu Control Display will shut OFF and lockout after 30 seconds of no use. Press and hold the MODE button for 10 seconds to unlock the LCD display.

INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-7

ELATION© SIXBAR 1000™

SYSTEM MENU

Specifications are subject to change without any prior written notice.
MENU| OPTIONS / VALUES| DESCRIPTION
DMX MODE

ADDR:xxx CH:xx

| ADDR:001 – 512

CH:06, 07, 11, 13, 36, 72, 75, 79

| Set DMX Address.

Set DMX Channel Mode.

SLAVE M O D E| | Set unit to Slave Mode.
AUTO RUN

FQN:xx

| FQN:01-99| Set the number of times each internal macro will repeat before moving to the next macro.
01.STATIC

– 15.FLOW1

| 01-15| Select Internal Program Macro.

See PROGRAM MACRO MENU for more details.

Manual

| R000-255 G000-255 B000-255 W000-255 A000-255 U000-255 STR:00-99|

Set RGBWAU and Strobe Values manually.

Macros| 00-63| Select Internal Color Macro.

See COLOR MACRO MENU for more details.

P R G R A M M A C R O M E N U

DIMMING CURVES
The DimCurve menu allows you to select one of the following preset dimming curves: Standard, Stage, TV, Architectural, Theatre, or Default.
(See diagram below for more details)

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-8 PIXEL FLIP
Select the desired starting COB module and chase direction from one of the following modes below via UP/DOWN buttons and then press ENTER to confirm.

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-FIG-9

ELATION© SIXBAR 1000™

C O L O R M A C R O M E N U

C O L O R M A C R O M E N U

DMX WORKSHOP™ (alternative software option to configure network settings)
DMX-Workshop™ is a fully featured network management, analysis, configuration and diagnostics tool for Art-Net networks. It can be used to configure the Ethernet network settings on this fixture remotely such as the IP Address, Subnet Mask, and the DMX Universe. This software application is Windows XP™ and Windows 7™ compatible and is free of charge and available via download here. (See link below)
http://artisticlicence.com/index.php?mode=products&sub=overview&action=&product_id=351

DMX CHANNEL FUNCTIONS AND VALUES

ELATION© SIXBAR 1000™
DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.
*Control of LEDs depends on the Pixel Flip setting.
DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
1| 1| 1| 1| | | | | | RED LED – All LEDS [1-12]
0-255| Red (0-Black – 255-100%)
2| 2| 2| 2| | | | | | GREEN LED – All LEDs [1-12]
0-255| Green (0-Black – 255-100%)
3| 3| 3| 3| | | | | | BLUE LED – All LEDs [1-12]
0-255| Blue (0-Black – 255-100%)
4| 4| 4| 4| | | | | | WHITE LED – All LEDs [1-12]
0-255| White (0-Black – 255-100%)
5| 5| 5| 5| | | | | | AMBER LED – All LEDs [1-12]
0-255| Amber (0-Black – 255-100%)
6| 6| 6| 6| | | | | | UV LED – All LEDs [1-12]
0-255| UV (0-Black – 255-100%)
| | | | 1| | | | | RED LED – All LEDS [1-2]
0-255| Red (0-Black – 255-100%)
| | | | 2| | | | | GREEN LED – All LEDs [1-2]
0-255| Green (0-Black – 255-100%)
| | | | 3| | | | | BLUE LED – All LEDs [1-2]
0-255| Blue (0-Black – 255-100%)
| | | | 4| | | | | WHITE LED – All LEDs [1-2]
0-255| White (0-Black – 255-100%)
| | | | 5| | | | | AMBER LED – All LEDs [1-2]
0-255| Amber (0-Black – 255-100%)
| | | | 6| | | | | UV LED – All LEDs [1-2]
0-255| UV (0-Black – 255-100%)
| | | | 7| | | | | RED LED – All LEDS [3-4]
0-255| Red (0-Black – 255-100%)
| | | | 8| | | | | GREEN LED – All LEDs [3-4]
0-255| Green (0-Black – 255-100%)
| | | | 9| | | | | BLUE LED – All LEDs [3-4]
| Blue (0-Black – 255-100%)
| | | | 10| | | | | WHITE LED – All LEDs [3-4]
0-255| White (0-Black – 255-100%)
| | | | 11| | | | | AMBER LED – All LEDs [3-4]
0-255| Amber (0-Black – 255-100%)
| | | | 12| | | | | UV LED – All LEDs [3-4]
0-255| UV (0-Black – 255-100%)
ELATION© SIXBAR 1000™

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | | 31| | | | | RED LED – All LEDS [11-12]
0-255| Red (0-Black – 255-100%)
| | | | 32| | | | | GREEN LED – All LEDs [11-12]
0-255| Green (0-Black – 255-100%)
| | | | 33| | | | | BLUE LED – All LEDs [11-12]
0-255| Blue (0-Black – 255-100%)
| | | | 34| | | | | WHITE LED – All LEDs [11-12]
0-255| White (0-Black – 255-100%)
| | | | 35| | | | | AMBER LED – All LEDs [11-12]
0-255| Amber (0-Black – 255-100%)
| | | | 36| | | | | UV LED – All LEDs [11-12]
0-255| UV (0-Black – 255-100%)
| | | | | 1| 1| 1| | RED LED – LED [1]
0-255| Red (0-Black – 255-100%)
| | | | | 2| 2| 2| | GREEN LED – LED [1]
0-255| Green (0-Black – 255-100%)
| | | | | 3| 3| 3| | BLUE LED – LED [1]
0-255| Blue (0-Black – 255-100%)
| | | | | 4| 4| 4| | WHITE LED – LED [1]
0-255| White (0-Black – 255-100%)
| | | | | 5| 5| 5| | AMBER LED – LED [1]
0-255| Amber (0-Black – 255-100%)
| | | | | 6| 6| 6| | UV LED – LED [1]
0-255| UV (0-Black – 255-100%)
| | | | | 7| 7| 7| | RED LED – LED [2]
0-255| Red (0-Black – 255-100%)
| | | | | 8| 8| 8| | GREEN LED – LED [2]
0-255| Green (0-Black – 255-100%)
| | | | | 9| 9| 9| | BLUE LED – LED [2]
0-255| Blue (0-Black – 255-100%)
| | | | | 10| 10| 10| | WHITE LED – LED [2]
0-255| White (0-Black – 255-100%)
| | | | | 11| 11| 11| | AMBER LED – LED [2]
0-255| Amber (0-Black – 255-100%)
ELATION© SIXBAR 1000™

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | | | 12| 12| 12| | UV LED – LED [2]
0-255| UV (0-Black – 255-100%)
| | | | | 13| 13| 13| | RED LED – LED [3]
0-255| Red (0-Black – 255-100%)
| | | | | 14| 14| 14| | GREEN LED – LED [3]
0-255| Green (0-Black – 255-100%)
| | | | | 15| 15| 15| | BLUE LED – LED [3]
0-255| Blue (0-Black – 255-100%)
| | | | | 16| 16| 16| | WHITE LED – LED [3]
0-255| White (0-Black – 255-100%)
| | | | | 17| 17| 17| | AMBER LED – LED [3]
0-255| Amber (0-Black – 255-100%)
| | | | | 18| 18| 18| | UV LED – LED [3]
0-255| UV (0-Black – 255-100%)
| | | | | 19| 19| 19| | RED LED – LED [4]
0-255| Red (0-Black – 255-100%)
| | | | | 20| 20| 20| | GREEN LED – LED [4]
0-255| Green (0-Black – 255-100%)
| | | | | 21| 21| 21| | BLUE LED – LED [4]
0-255| Blue (0-Black – 255-100%)
| | | | | 22| 22| 22| | WHITE LED – LED [4]
0-255| White (0-Black – 255-100%)
| | | | | 23| 23| 23| | AMBER LED – LED [4]
0-255| Amber (0-Black – 255-100%)
| | | | | 24| 24| 24| | UV LED – LED [4]
0-255| UV (0-Black – 255-100%)
| | | | | 25| 25| 25| | RED LED – LED [5]
0-255| Red (0-Black – 255-100%)
| | | | | 26| 26| 26| | GREEN LED – LED [5]
0-255| Green (0-Black – 255-100%)
| | | | | 27| 27| 27| | BLUE LED – LED [5]
0-255| Blue (0-Black – 255-100%)
| | | | | 28| 28| 28| | WHITE LED – LED [5]
0-255| White (0-Black – 255-100%)
| | | | | 29| 29| 29| | AMBER LED – LED [5]
0-255| Amber (0-Black – 255-100%)
| | | | | 30| 30| 30| | UV LED – LED [5]
0-255| UV (0-Black – 255-100%)
ELATION© SIXBAR 1000™

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | | | 31| 31| 31| | RED LED – LED [6]
0-255| Red (0-Black – 255-100%)
| | | | | 32| 32| 32| | GREEN LED – LED [6]
0-255| Green (0-Black – 255-100%)
| | | | | 33| 33| 33| | BLUE LED – LED [6]
0-255| Blue (0-Black – 255-100%)
| | | | | 34| 34| 34| | WHITE LED – LED [6]
0-255| White (0-Black – 255-100%)
| | | | | 35| 35| 35| | AMBER LED – LED [6]
0-255| Amber (0-Black – 255-100%)
| | | | | 36| 36| 36| | UV LED – LED [6]
0-255| UV (0-Black – 255-100%)
| | | | | 37| 37| 37| | RED LED – LED [7]
0-255| Red (0-Black – 255-100%)
| | | | | 38| 38| 38| | GREEN LED – LED [7]
0-255| Green (0-Black – 255-100%)
| | | | | 39| 39| 39| | BLUE LED – LED [7]
0-255| Blue (0-Black – 255-100%)
| | | | | 40| 40| 40| | WHITE LED – LED [7]
0-255| White (0-Black – 255-100%)
| | | | | 41| 41| 41| | AMBER LED – LED [7]
0-255| Amber (0-Black – 255-100%)
| | | | | 42| 42| 42| | UV LED – LED [7]
0-255| UV (0-Black – 255-100%)
| | | | | 43| 43| 43| | RED LED – LED [8]
0-255| Red (0-Black – 255-100%)
| | | | | 44| 44| 44| | GREEN LED – LED [8]
0-255| Green (0-Black – 255-100%)
| | | | | 45| 45| 45| | BLUE LED – LED [8]
0-255| Blue (0-Black – 255-100%)
| | | | | 46| 46| 46| | WHITE LED – LED [8]
0-255| White (0-Black – 255-100%)
| | | | | 47| 47| 47| | AMBER LED – LED [8]
0-255| Amber (0-Black – 255-100%)
| | | | | 48| 48| 48| | UV LED – LED [8]
0-255| UV (0-Black – 255-100%)
ELATION© SIXBAR 1000™

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | | | 49| 49| 49| | RED LED – LED [9]
0-255| Red (0-Black – 255-100%)
| | | | | 50| 50| 50| | GREEN LED – LED [9]
0-255| Green (0-Black – 255-100%)
| | | | | 51| 51| 51| | BLUE LED – LED [9]
0-255| Blue (0-Black – 255-100%)
| | | | | 52| 52| 52| | WHITE LED – LED [9]
0-255| White (0-Black – 255-100%)
| | | | | 53| 53| 53| | AMBER LED – LED [9]
0-255| Amber (0-Black – 255-100%)
| | | | | 54| 54| 54| | UV LED – LED [9]
0-255| UV (0-Black – 255-100%)
| | | | | 55| 55| 55| | RED LED – LED [10]
0-255| Red (0-Black – 255-100%)
| | | | | 56| 56| 56| | GREEN LED – LED [10]
0-255| Green (0-Black – 255-100%)
| | | | | 57| 57| 57| | BLUE LED – LED [10]
0-255| Blue (0-Black – 255-100%)
| | | | | 58| 58| 58| | WHITE LED – LED [10]
0-255| White (0-Black – 255-100%)
| | | | | 59| 59| 59| | AMBER LED – LED [10]
0-255| Amber (0-Black – 255-100%)
| | | | | 60| 60| 60| | UV LED – LED [10]
0-255| UV (0-Black – 255-100%)
| | | | | 61| 61| 61| | RED LED – LED [11]
0-255| Red (0-Black – 255-100%)
| | | | | 62| 62| 62| | GREEN LED – LED [11]
0-255| Green (0-Black – 255-100%)
| | | | | 63| 63| 63| | BLUE LED – LED [11]
0-255| Blue (0-Black – 255-100%)
| | | | | 64| 64| 64| | WHITE LED – LED [11]
0-255| White (0-Black – 255-100%)
| | | | | 65| 65| 65| | AMBER LED – LED [11]
0-255| Amber (0-Black – 255-100%)
| | | | | 66| 66| 66| | UV LED – LED [11]
0-255| UV (0-Black – 255-100%)
ELATION© SIXBAR 1000™

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | | | 67| 67| 67| | RED LED – LED [12]
0-255| Red (0-Black – 255-100%)
| | | | | 68| 68| 68| | GREEN LED – LED [12]
0-255| Green (0-Black – 255-100%)
| | | | | 69| 69| 69| | BLUE LED – LED [12]
0-255| Blue (0-Black – 255-100%)
| | | | | 70| 70| 70| | WHITE LED – LED [12]
0-255| White (0-Black – 255-100%)
| | | | | 71| 71| 71| | AMBER LED – LED [12]
0-255| Amber (0-Black – 255-100%)
| | | | | 72| 72| 72| | UV LED – LED [12]
0-255| UV (0-Black – 255-100%)
| 7| 7| 7| | | 73| 73| | MASTER DIMMER
0-255| 0 to 100%
| | ****

8

| ****

8

| | | ****

74

| ****

74

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION
6CH| 7CH| 11CH| 13CH| 36CH| 72CH| 75CH| 79CH| |
| | | ****

9

| | | | ****

75

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION

6CH

| ****

7CH

| ****

11CH

| ****

13CH

| ****

36CH

| ****

72CH

| ****

75CH

| ****

79CH

| |
| | | ****

9

| | | | ****

75

DMX Channel Values / Functions Version 1 (79 DMX Channels)

Specifications are subject to change without any prior written notice.

*Control of LEDs depends on the Pixel Flip setting.

DMX CHANNEL MODE| VALUE| FUNCTION

6CH

| ****

7CH

| ****

11CH

| ****

13CH

| ****

36CH

| ****

72CH

| ****

75CH

| ****

79CH

| |
| | ****

9

| ****

10

| | | | ****

76

13

| | | ****

75

| ****

79

CLEANING AND MAINTENANCE

CAUTION
Disconnect power before cleaning or maintenance.

CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of cleaning depends on the environment in which the fixture operates: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture’s optics.

Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt/debris accumulation.
Never use alcohol, solvents, or ammonia based cleaners.

MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:

A detailed electric check by an approved electrical engineer every three months, to make sure the circuit contacts are in good condition and prevent overheating.
Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall.
Check for any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person(s).
Electric power supply cables must not show any damage, material fatigue or sediments. Never remove the ground prong from the power cable.

TECHNICAL SPECIFICATIONS

FEATURES
30° Beam Angle
ArtNet and Kling-NET Support
RDM – Remote Device Management

Individual LED Control

Variable Dimming Curve Modes
Multiple Unit Power Linking
Rugged Die-Cast Aluminum Exterior
Flicker Free Operation for TV and FILM

SOURCE

(12) 12W 6-in-1 RGBAW+UV LEDs
100,000 Hour Average LED Life

EFFECTS

Strobe and Chase Effects
Individual LED Control
Variable and Selectable Dimming Curves

CONTROL / CONNECTIONS

8 DMX Channel Modes (6 / 7 / 11 / 13 / 36 / 72 / 75 / 79)
4 Button Control Panel and LCD Menu Display
ArtNet + KlingNET Protocol Support
RDM (Remote Device Management)
(2) RJ45 Ports
3pin and 5pin DMX In/Out
powerCON Power In/Out

SIZE / WEIGHT

Length: 35.4” (900mm)
Width: 8.1” (206.4mm) *with included shield
Vertical Height: 6.1” (155mm)
Weight: 16.0 lbs. (7.3 kg)

ELECTRICAL / THERMAL

AC 110-240V – 50/60Hz
145W Max Power Consumption
Power Linking: 6pcs @110V / 15pcs @240V
5°F to 113°F (-15°C to 45°C)

APPROVALS / RATINGS

CE | IP20

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.

PHOTOMETRIC DATA

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-
FIG-10

DIMENSIONAL DRAWINGS

1000TM-Sixbar-Elation-Professional-Europe-LED-TV-
FIG-11 OPTIO N AACC ESSORIES

ORDER CODE	ITEM
TRIGGER CLAMP	Heavy Duty Wrap Around Hook Style Clamp
EWDMXSYSTEM	Wireless DMX System (1 Transmitter, 1 Receiver)
EWDMXT	Wireless DMX Transmitter
EWDMXR	Wireless DMX Receiver
PLC3	3′ (1m) powerCON PRO Link Cable
AC3PDMX5PRO	5 ft. (1.5m) 3pin PRO DMX Cable
AC5PDMX5PRO	5 ft. (1.5m) 5pin PRO DMX Cable
CAT005	5’ (1.5m) CAT6 Ethercon Cable
Additional Cable Lengths Available