PHILIPS DyNet-SFLAT6-CABLE Flat Cable Instruction Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS DyNet-SFLAT6-CABLE Flat Cable
Product Information
- Specifications
- Electrical
- Conductor DC Loop Resistance: 240 Ω/km (max)
- Drain DC Resistance: 40 Ω/km (max)
- Physical
- Dimensions (Cross-Section): 2.65 x 6.95 mm (0.104 x 0.274 in)
- Packed Weight: 8 kg / 200 m roll (17.6 lb / 656 ft roll)
- Outer Jacket Construction: PVC
- Outer Jacket Color: Orange
- Wires Insulation Colors: White, Red, Green, Yellow, Black
- Shielding: Aluminum/polyester tape
Product Usage Instructions
- Installation Guidelines
- Ensure the installation temperature is within the specified range of 0 to 90% non-condensing.
- Handle the cable carefully to avoid damage to the conductors and shielding.
- Use appropriate termination methods for connecting network devices.
- Connecting Devices
- Identify the required cable length for connecting devices.
- Strip off the outer jacket carefully to expose the conductors.
- Terminate the cable using RJ12 connectors for a secure connection.
- Maintenance and Care
- Regularly inspect the cable for any signs of wear or damage. Keep the cable away from sharp objects or excessive bending to maintain its performance.
FAQs
- Q: Can this cable be used for outdoor installations?
- A: No, this cable is certified for indoor installation only.
- Q: Are different lengths available for purchase?
- A: Yes, the product is available in various lengths including 10m, 5m, and 3m leads with RJ12 terminations.
Faster Installation
Cable roll and cable kits for faster installation
Flat data cable is specifically designed for high-reliability localized network wiring. In addition to a conductor pair for data, conductors are provided to supply DC power to network-powered devices.
- Overall shield for maximum data integrity – The data cable is flexible and all conductors are stranded.
- Fast termination – Designed for rapid crimp termination into RJ12 plugs for use with Philips Dynalite products supporting RJ12 sockets.
- Supply options – Available in 200 m rolls or pre-terminated leads of 3, 5 and 10 m lengths.
- Utilize DDPB22-RJ12 network junction box for faster installation – Facilitates termination of 22 DyNet flat cables in one location.
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
Electrical
- Conductor DC Loop Resistance 240 Ω/km (max)
- Drain DC Resistance 40 Ω/km (max)
Conductors
- Wires 5 x 0.14 mm2 (#26 AWG) 12-strand
- Insulation Polyethylene HDPE Ø 1 mm ± 0.02 mm
- Colors
- White
- Red
- Green
- Yellow
- Black
- Silver (shield)
- Shielding Aluminum/polyester tape
- Drain Wire Foil-wrapped copper 0.2 mm2 (#24 AWG) 9-strand
Physical
- Dimensions (Cross-Section) 2.65 x 6.95 mm (0.104 x 0.274 in)
- Packed Weight 8 kg / 200 m roll (17.6 lb / 656 ft roll)
- Outer Jacket Construction PVC
- Outer Jacket Color Orange
Environment
- Installation Temperature 0° to 50°C ambient (32° to 122°F)
- Operating Temperature -20° to 50°C ambient (-4° to 122°F)
- Storage/Transport Temperature -25° to 60°C ambient (-13° to 140°F)
- Humidity 0 to 90% non-condensing
Compliance
- Certification CE, UKCA, RoHS
For indoor installation only
Ordering Code
- Product Philips 12NC
- DYNET-SFLAT6-CABLE (200 m roll) 913703095009
- DYNET-SFLAT6-CABLE-10M (10 m lead, RJ12 termination) 913703041109
- DYNET-SFLAT6-CABLE-5M (5 m lead, RJ12 termination) 913703041209
- DYNET-SFLAT6-CABLE-3M (3 m lead, RJ12 termination) 913703041309
© 2024 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
- www.dynalite.com.
- Revision 05 – 2024-01-11