FMS 1035142 Force Sensors User Guide
- June 17, 2024
- Fms
Table of Contents
FMS 1035142 Force Sensors
Quick-start-guide for FMS force sensors This document provides basic guidelines for the installation of FMS force sensors. It does not include information on options, accessories, maintenance, service, trouble-shooting, dimensions or applications in explosion-proof areas. Read these instructions thoroughly before commissioning. Keep the document in a safe place.
Scan QR code for detailed documents and CAD files.
Please contact the document for the German version.
Safety instructions
The following section indicates a possible dangerous situation which – if the safety regulations are not observed – may result in death or serious injury.
Warning – Danger of breaking
If the force transducer is heavily overloaded, there is a risk that it will break. This can result in hazards for the operating personnel of the system. Take suitable safety measures to prevent overloading or to protect against resulting hazards. The maximum possible loads are noted in the technical data.
Caution – Incorrect electrical connection leads to malfunctions
Color specifications of the strands according to IEC60757 are only valid for standard cables from FMS. If you use your own cables, the colors may differ. Incorrect measurement results or damage to com-ponents may result. FMS recommends 2x2x0.25mm2 shielded, twisted-pair cable. Use FMS cables or ensure the correct connection.
Product labeling
| Pos. | Description |
|---|---|
| 1 | Order code |
| 2 | QR code for further, product specific infor- mation |
Detailed installation instructions
Data sheet
Test protocol
Wiring diagram
CAD data
etc.
3| Nominal force
4| Serial number
Installation
| Pos. | Description |
|---|---|
| 1 | Force sensors |
| 2 | Resulting force on measuring roller |
| 3 | Red point, indicates the measuring direction for positive output signal |
| 4 | Web, material tension |
Fixed and floating bearing – LIVE shaft force sensors
F I X E D bearing
Fixed and floating bearing – DEAD shaft force sensors
F I X E D bearing
Electrical connection
FMS Force Measuring Systems AG Aspstrasse 6 8154 Oberglatt (Switzerland)
- Tel. +41 44 852 80 80
- info@fms-technology.com
- www.fms-technology.com
FMS USA, Inc. 2155 Stonington Avenue Suite 119 Hoffman Estates IL 60169 (USA)
- Tel. +1 847 519 4400
- fmsusa@fms-technology.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>