FMS-TRACE 2000 Series Hardware Installation Guide

FMS-TRACE 2000 Series Hardware

Introduction

The FMS Trace 2000 is a series of GPS-based devices designed to offer users an efficient and low-cost vehicle tracking system with easy installation, wireless sensors, and a high-performance tracking system as key features. The FMS Trace 2000 is the ideal solution for automotive, security, and customs agencies, trucking companies, insurance, stolen vehicle, vehicle finance, auto rental, and other automotive tracking applications when self-sustainable power for several days is required. The FMS Trace 2000 is a high-value tracking device, some of its features are: Small size, Superior GPS performance and 3 multifunction inputs, IP66 waterproof enclosure, inside-the-box antennas, and other optional features.

Features & Benefits

Key Features

• High Performance GPS/GPRS.
• Modular and upgradable to include other features. 3 multifunction inputs.
• Driver ID (RFID).
• IP66 waterproof enclosure.
• Ignition relay and immobilization function.
• All inside antennas.
• Can connect wireless sensors i.e. e-lock, e-gate. Easy to install and use.
• Remote configuration and device settings. Remote firmware upgrade.
• Ignition Input.

Benefits

• Superior internal antennas for both GSM and GPS eliminate the need for wired antennas and make the FMS Trace 2000 mountable virtually anywhere in the vehicle for easy, inexpensive installation.
• Information is transported across the GSM/GPRS network using enhanced TCP/IP packets providing a reliable communications link between the device and your application servers or ours.
• Fleet owners can monitor their driver’s unsafe driving habits, review trip information, driving performance, time attendance, and schedule for download at a specific time anytime and virtually from anywhere, just require an internet connection.
• Driver Identification (RFID).
• The FMS Trace 2000 employs the FMS Tech. latest onboard device configuration and settings. All settings and device configurations including hardware or software settings for all events,  thresholds, tolerance, etc., seamlessly with minimal effort; just require an internet connection.
• The FMS Trace 2000 incorporates the FMS Tech., industry-leading over-the-air device management and maintenance software. All configuration and programs inside the hardware device can be changed and upgraded offering out-of-the-box hands-free configuration and automatic post-installation upgrades. You can also monitor unit health status across your customer’s fleets to quickly identify issues before they become expensive problems.
• Alarm buzzer to warn driver upon exceeding a certain limit

Applications

• The FMS Trace 2000 was designed to dramatically reduce cost, power, and size, while significantly improve device reliability in the field.

Recording Function

• Speed via GPS
• Driver ID
• Over speeding
• Not wearing seatbelt Exceeding thresholds
• Events value, time & duration Status of each input
• Input values, max & average
• Ignition relay & driver access
• Analog and digital sensors
• Remote immobilization function
• Remote configuration
• Remote firmware upgrade Online tracking
• Offline tracking
• Route & vehicle movement history Geo-Fencing
• Waterproof enclosure

Accessories

The FMS Trace 2000 Series Product comes with all necessary accessories and product complements. The package will include the following:

• e-Lock (Container Seal) No
• Trailer ID No
• Sky Link Yes
• MP3 Voice Alert Yes
• Voice Communication No
• Driver Fatigue Yes
• Tailgating Yes
• In-Cab Camera Yes

Product Description

• Operating voltage:
  – Vehicle Battery
  – Optional : (Backup Battery 7.4 V, 750 mAh)

• Current consumption 130 mA

• CPU 16 bit Microchip DSC 80 MHz

• Memory 2 MB Flash Upgradable to 16 MB

• Information stored duration 1 Year without power

• No. of Inputs 3 and 1 ignition

• Interface GRPS, RFID & RS232

• Ignition relay External

• Driver ID RFID

• Download technology Wired and wireless

• Indicator 4 LED

• Driver Alert External Buzzer (Opt.)

• Speed pulse range Speed Thru GPS

• Speed measuring range Unlimited

• Overvoltage protection Up to 60 V (Optional)

• No. of digital /analog inputs 4 Bidirectional

• Programmable voltage Up to 33 V

• Frequency inputs 1 sample per sec.

• RFID conformance 13.56 MHz ISO 15693 RFID

• RFID Proximity 1– 4 cm

• RFID Antenna External

• RFID Card Plastic or Tag

• Interface RS232 57600 bps Serial

• Operating Temperature -20° C +75° C

• Storage Temperature -40° C +85° C

• Relative Humidity Up to 95%

• Dimension 135 mm x 73 mm x 45 mm

• Weight 220 g

• Enclosure Rugged Plastic

• Protection class IP66

GPRS Specification

Content Specifications

• Frequency Quad-band GSM 850/EGSM 900 DCS 1800/PCS 1900
• Brand & Model NEOWAY-M660SS
• Integrated Stacks TCP/IP
• Dual Communication and Capability GPRS and SMS
• GPRS Packet Up to 80 Kbps
• GPRS Antenna Internal Built-in
• Tail Gating Yes
• In-Cab Camera Yes
• Model SKM53
• Protocol Transmission data NMEA 0183
• No. of channels 22 SAT/66 CH
• Tracking sensitivity -159 dBm
• Frequency 1575.42 MHz L1 C/A Code
• Chipset SKM53 GPS Module Micro Control MT3329 Chipset W
• Autonomous < 10 m at 2 DRMS
• SBAS < 7m at 2DRM, WAAS corrected
• DGPS 1-5 m at DGPS corrected
• GPS Hot start 1 sec. avg.
• GPS Warm start 38 sec. avg
• GPS Cold start 42 sec. avg

FMS RFID Driver Access Card

• Content Specifications
• Supported Standard ISO 15693
• Operating frequency 13.56 MHz
• Typ. required activation field strength read (at +25qC) 94 dBPA/m
• Typ. required activation field strength write (at +25qC) 97 dBPA/m
• Factory programmed Read-Only Number 64 bits
• Memory (user programmable) 2k bits organized in 64 x 32-bit blocks
• Typical programming cycles (at +25qC) 100000
• Data retention time (at +55qC) > 10 years
• Simultaneous Identification of Tags Up to 50 tags per second (reader/antenna dependent)
• Dimensions 85.6 mm x 54 mm x 0.76mm (according ISO 7810)
• Weight 5 grams
• Case material PVC (Polyvinyl chloride), white
• Product Identifier 3mm from the edge, TI Logo + 4 digit number (2 mm x 8 mm)
• Surface finish Glossy
• Printability Thermos transfer, Tampon, Silkscreen
• Mechanical Stability (Bending, Torsion) According to ISO 10373
• Operating temperature -25qC to +50qC (according to ISO7810)
• Storage temperature -25qC to +50qC (according to ISO 7810

Technical Specification

Content Specifications

• Satellite GPS Receiver GPS
• Data Network Modem 2G/3G
• GSM Technology Quad-Band
• Voice Support No
• GPS Antenna Int.
• GSM Antenna Int.
• GPS Hot Start < 6 sec
• GPS Cold Start (Open Sky) < 30 sec
• No. of Satellite Channels 22 SAT/66 CH
• TCP/IP Yes
• No. of inputs 4
• Digital/Analogue 4
• Frequency 0
• Ignition Input 1
• No. of outputs 2
• RS 232 1
• ZigBee 2.4 GHz Wireless Optional
• Wireless 2.4 GHz Function Optional
• Speed via GPS Yes
• Speed via Gearbox No
• Engine RPM No
• Driver Identification Yes
• Driver Identification Technology RFID
• Panic Button Optional
• Remote Immobilizer Yes
• Ignition Relay Ext.
• Harsh Braking No
• Harsh Acceleration No
• Vibration (Graded Road) Yes
• Movement sensor Yes
• Harsh shock Yes
• Idle time Yes
• Online Tracking Yes
• Offline Tracking Yes
• No. of Events Unlimited
• Tolerance configuration Yes
• Buzzer Alarm Yes
• Internal Battery Optional
• Internal Battery Autonomy 1-5 hours
• Events Configuration limited
• No. of reports 30+
• Memory Size 4 MB
• Power Consumption @12VDC 200ma
• Power Spike Protection 150v
• Main Harness Cable Yes
• Additional Harness Cable No
• Cigarette Lighter Power Cable No

Wire Connection

Color PIN Description Wire Length

• Red 1 Power ( Vehicle Battery ) 2.5 meter
• Yellow / Green line 2 RS485-B (RFID Antenna) 30 CM
• Gray 3 RS232 – Data in 2.5 meter
• Yellow 4 RS232 – Data out 2.5 meter
• White / Yellow line 5 A/D In4 or Buzzer 2.5 meter
• White / Green line 6 A/D In3 Or Relay 2.5 meter
• White / Red line 7 A/D In2 Or External Output 2 2.5 meter
• White / Violet line 8 Ignition – A/D In1 2.5 meter
• Brown 9 Power ( Vehicle Ground ) 2.5 meter
• Yellow / Red line 10 RS485-A (RFID Antenna) 30 CM
• Brown / Black line 11 GND (Out for RFID Antenna) 30 CM
• Pink 12 Output (9V for RIFD Antenna) 30 CM

NOTE: The wire diameter is AWG 22# Brown/Black Line ,PIN 11 (GND OUT) This used for RFID Module.

Test Station Side-Connector Pinout

Color PIN Description

• Brown 1 Power (Vehicle Ground)
• Red 2 Power (Vehicle Battery)
• White/Violet line 3 Ignition – A/D In1
• White/Red line 4 A/D In2 Or External Output 2
• White/Green line 5 A/D In3 Or Relay
• White/Yellow line 6 A/D In4 or Buzzer
• Yellow 7 RS232 – Data out
• Gray 8 RS232 – Data in

Trace 2000 to Test Station Cable Matching Table

Color PIN  (Trace 2000) PIN (Test Station) PIN (RFID) Description

• Red 1 2 – Power (Vehicle Battery)
• Yellow / Green line 2 – 2 RS485-B
• Gray 3 7 – RS232 – Data Trace 2000 In -Test Station Out
• Yellow 4 8 – RS232 – Data Trace 2000 Out – Test Station In
• White / Yellow line 5 6 – A/D In4 or Buzzer
• White / Greenline 6 5 – A/D In3 Or Relay
• White / Redline 7 4 – A/D In2 Or External Output 2
• White / Violet line 8 3 – Ignition – A/D In1
• Brown 9 1 – Power (Vehicle Ground)
• Yellow / Redline 10 – 3 RS485-A
• Brown / Blackline 11 – 4 GND (Out)
• Pink 12 – 1 Output 9V

Wire Diagram for FMS Trace 2000 with FMS CAN Bus Interface

PIN Color Description

Female connector PIN (Colors in Diagram Represent wire color) and FMS CAN Bus Interface Pinout (Colors in Diagram Represent wire color)

• Trace 2000 Pin 1 Red Power (Vehicle Battery)
• Trace 2000 Pin 2 Green To CAN Bus interface*
• Trace 2000 Pin 3 Gray RS232 RX
• Trace 2000 Pin 4 Yellow RS232 TX
• Trace 2000 Pin 5 White/Yellow A/D In4
• Trace 2000 Pin 6 White/Green A/D In3 or Relay
• Trace 2000 Pin 7 White/Red A/D In2 or External Out2
• Trace 2000 Pin 8 White/Violet Ignition – A/D In1
• Trace 2000 Pin 9 Brown GND (Vehicle GND)
• Trace 2000 Pin 10 Blue To CANBUS interface**
• Trace 2000 Pin 11 Black Not Use
• Trace 2000 Pin 12 Pink Not Use
• CAN Bus Interface P1-1 Red Power (Vehicle Battery)
• CAN Bus Interface P1-2 Brown GND (Vehicle GND)
• CAN Bus Interface P1-3 Gray CAN_L OBDII
• CAN Bus Interface P1-4 Yellow CAN_H OBDII
• CAN Bus Interface P2-4 Yellow To FMS Trace2000 *
• CAN Bus Interface P2-5 Gray To FMS Trace2000 **
• CAN Bus Interface P3 RFID Reader
• CAN Bus Interface rest PINs Not Use

NOTE: * and ** the CANBUS communication from Vehicle’s CANBUS to FMS Trace2K thru FMS CANBUS Interface (to get Speed & RPM from CANBUS)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>