HH-Tech Smart Tag Apple User Manual
- June 17, 2024
- HH-Tech
Table of Contents
HH-Tech
Smart Tag
User Manual
Update 12-DEC-2023
English version
Smart Tag
Specification
| Model | HHTag01/HHTag02 |
|---|---|
| Size | 36x36x7.8 mm/1.42×1.42×0.31 inch |
| Weight | 11g / 0.39 oz |
| Battery | CR2032 （Replaceable） |
| Voltage | DC 3V |
| Current | ≤ 5uA(Standby) / ≤ 10mA(Max) |
| Wireless | BLE 5.1 |
| Wireless range | ≥ 40m（Line-of-sight） |
| Buzzer | Built-in ≥75db (in 10cm) |
| Temperature range | – 5°C–45°C (23°F– 113°F) |
| Humidity range | ≤ 95%（Non-condensing） |
Setting Up Your iPhone
Compatibility
SmartTag is only compatible with iPhone running iOS 14.5 or later version,
with two factor authentication turned on.
1. Turn on two-factor authentication:
Go to Settings > your name > Sign in & security> turn on two factor
authentication , then tap continue and follow the instructions. (For
most, your two-factor authentication is already turned on, so just skip this
step)
2. Turn on Apple Findmy
Go to settings> your name> findmy > find my iphone (trun on)
3. Turn on Bluetooth
4. Connect to a stable Wi-Fi or cellular network
5. Turn on location services
Go to settings> privacy & security > location service (trun on)
Getting Started
function button
Power On:
Press the function button once, it should beep once, it means the tag is
powered on.
Power Off:
Press the function button for three seconds, when you hear two beeps, it means
your tag is powered off.
Factory Reset:
Press the function button on the SmartTag 4 times rapidly and long press it on
the 5th press until you hear a ring, meaning the tag has been factory reset.
Pairing
Before pairing, make sure your iPhone is set up.
1. Remove the insulating paper from the tag, when you hear the dili-dili
sound, meaning the tag is ready to be paired. (If you don’t hear the sound,
click the function button)
2. Open the Find My app.
3. Hold the device close to your iPhone, iPad, tap the Items tab, tap +
and then click Add Other Item.
For iOS 14.5-16, please tap Add item-Other supported item
4. After a pop-up appears, tap Connect.
5. Type a name for your device, select an emoji.
6. Tap Agree to acknowledge that this item will be linked to your Apple ID.
7. Tap Finish.
Locating Your Smart Tag
1. Locate your Tag:
Open Findmy app, tap the items tab, then tap your item, you can see the exact
location of your tag, also you can tap directions to get directions in the
map.
Or you can ask Siri by saying “Hey Siri, where are “my keys”, if you name the
item as “my key”.
2. Play the sound:
Make sure the tag is within the Bluetooth range and your iPhone Bluetooth is
turned on. Open Findmy app, tap the items tab, then tap your item, tap play
a sound.
3. Set up Left Behind Mode:
When your tag is out of your bluetooth range, after a few minutes, your iPhone
will receive a notification that the item is left behind.
Open Findmy app, tap the items tab, then tap your item, under
notifications , tap notify when left behind and turn on.
4. Mark your tag as lost
Before set lost mode, make sure Left Behind mode is turned on. Open Findmy
app, tap the items tab, then tap your item, set lost mode, tap enable.
Then tap continue , enter your phone number/email address so that the
finder of your tag can contact you, then tap activate.
Warning: Enabling Lost Mode or playing sound frequently will reduce the
battery life.
Removing Tag from iPhone
Removing tag from your iPhone will allow the tag to be paired with another
iPhone.
Open Findmy app, tap the items tab, then tap your item, under Remove item,
tap and confirm to remove.
Unwanted Tracking Notification
If the tag is travelling with people and separated from it’s owner, the tag will beep to remind the people that they might be tracked, and there iPhone (if they are using iPhone and iOS 14.5 above) will get a notification that someone is trying to track them.
Warning: Using the Tags to track people and pets is not allowed.
How To Replace The Battery
1. Use the tool open the cover
2.Replace the battery.
3. Close the cover.
1. Use the tool open the cover
2.Replace the battery.
3. Close the cover.
It is strictly prohibited to touch both the positive and negative terminals of the battery at the same time, as it may cause a short circuit and serious loss of power.
WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN
Swallowing may lead to serious injury in as little as 2 hours or death, due to
chemical burns and potential perforation of the esophagus. If you suspect your
child has swallowed or inserted a button battery, immediately call the 24-hour
Poison Information Centre for fast expert advice.
Rated voltage 3V
Rated current ~175 mAh
Legal notice
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements.
Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Credit line
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Customer service
E-mail:
sale@hhtechb.com
Website: www.hhtechb.com
WhatsApp (only support English text message currently, not accept voice message, voice call and video call.)
Design and Sold by HH-Tech LTD in Manchester, England.
copyright © 2023 HH-Tech LTD. All rights reserved.