VOLLRATH 38775 Cafeteria Breath Guard Installation Guide

: June 1, 2024
: VOLLRATH

Table of Contents

VOLLRATH 38775 Cafeteria Breath Guard
Specifications
Product Usage Instructions
FAQ
Installation Instructions
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLLRATH 38775 Cafeteria Breath Guard

VOLLRATH-38775-Cafeteria-Breath-Guard -FIG-2

Specifications

Product Name : Cafeteria Breath Guard
Model: One Piece and Three Piece options
Manufacturer: Vollrath Company, L.L.C.

Product Usage Instructions

One Piece Breath Guard Installation

Some units may come with the breath guard not installed.
Install the breath guard uprights (A) to the studs (B) and secure with cap nuts (C). Repeat for all four uprights.
Be cautious when tightening the cap nuts to avoid cracking the plastic.

Three-Piece Breath Guard Installation

Some units may come with the breath guard not installed.
Install the breath guard uprights (A) to the studs (B) and secure with cap nuts (C). Repeat for all four uprights.
Install the breath guard support tube (D) between the uprights (A) and secure with cap nuts (C).
Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C).
Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C).
Be cautious when tightening the cap nuts to avoid cracking the plastic.

FAQ

Q: What should I do if I accidentally overtighten the cap nuts?
A : If you accidentally overtighten the cap nuts and notice cracking, stop immediately. Contact Vollrath Company for replacement parts or assistance.
Q: Can I adjust the height of the breath guards?
A: The height of the breath guards is typically set during installation. Adjusting the height may require additional parts or modifications, consult the manufacturer for guidance.

Installation Instructions

One Piece Cafeteria Breath Guard
three Piece Cafeteria Breath Guard

These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C)as shown. See Figure 1. Repeat for all four uprights.
Figure 1. One Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

Three-Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C)as shown. See Figures 1 and 2. Repeat for all four uprights.
Figure 2. Three-Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.