ROCCAT Syn Pro Air Wireless Gaming Headset User Guide
- June 17, 2024
- ROCCAT
Table of Contents
QUICK START GUIDE
Air Wireless Gaming Headset
PACKAGE CONTAINS
HEADSET CONTROLS
LED INDICATIONS
CHARGING
The Syn™ Pro Air uses a 24+ hour rechargeable battery.
Make sure to charge it regularly.
Headset Storage
Always charge your headset before storing it for any extended period of time
(greater than 3 months). Never store the unit in temperatures above
113°F/45°C.
USB-C COMPATIBILITY
The Syn™ Pro Air also works great
with other platforms with USB-C ports, including the PS5™, Nintendo Switch™,
and Android™.
- Connect your Syn™ Pro Air Transmitter to the included USB-C adapter
- Plug the combined Transmitter and USB-C adapter piece into a USB-C slot in your device
- Hold the Power Button on the headset for 2 seconds to turn it on
- In your device’s settings, make sure the Syn™ Pro Air is selected on your device
When connecting the transmitter to a PS5™ or PS4™, master volume must be
adjusted from the Settings Menu.
*Software capabilities are only available on PC.
PC SETUP
- Plug the Syn™ Pro Air Transmi tter in a USB slot on your PC
- Hold the Power Button for 2 seconds to turn on the headset (the transmitter and headset are automatically paired)
- Right click the speaker icon in your toolbar and select “Open Sound Settings”
- Select “Syn™ Pro Air” from the “Choose Your Output Dev ice” drop-down menu
- Open the driver sof tware to customize your settings
Customize your ROCCAT® product and keep it up to date with the latest software
and firmware
Download now for Windows® 10 & Windows® 11 at:
WWW.ROCCAT.COM/DOWNLOADS
TECHNICAL FACTS
TECH SPECS
- Direct wireless connection v ia USB-A transmi tter
- 20Hz – 20kHz speaker frequency response
- 50mm speakers with neodymium magnets
- Audio controls: master volume wheel, variable mic monitoring, and mic mute
- Removable + flip-up unidirectional microphone
- Athletic fabric on headband and ear cushions
- Over-ear design featuring memory foam
- Weight: 286g (without microphone)
SYSTEM REQUIREMENTS
- W indows® 10 & W indows® 11 (sof tware support)
- USB 2.0 (or higher)
- Internet connection
Should you need assistance …
Our support team is ready to help you wi th any technical questions.
Just send an e-mail to [email protected] or
visit our websi te at: WWW.ROCCAT.COM/SUPPORT
MICROPHONE ATTACHMENT
- Remove the Microphone Cover from the lef t ear cup
- Align the Removable Microphone with the microphone slot on the lef t ear cup
- Press firmly until the Removable Microphone clicks into the microphone slot
MICROPHONE FLIP-TO-MUTE OPERATION
Microphone Mute
Flip up mic to mute. There is an audbile tone when the mic is muted or
unmuted.
REGULATORY COMPLIANCE STATEMENTS
FOR THE SYN PRO AIR RX & TX LOCAL RESTRICTIONS ON RADIO USAGE
Caution: Due to the fact that the frequencies used by wireless devices may not
yet be harmonized in all countries, these radio products are designed for use
only in specific countries, and are not allowed to be operated in countries
other than those of designated use. As a user of these products, you are
responsible for ensuring that the products are used only in the countries for
which they were intended and for verif ying that they are configured with the
correct selection of frequency and channel for the country of use.
Any deviation from the permissible power and frequency settings for the
country of use is an infringement of national law and may be punished as such.
To determne whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed
on the identification label of your device is listed in the manufacturers OEM
Regulatory Guidance document at the following URL
http://www.turtlebeach.com/homoogation or contact Turtle Beach directly.
FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES
This section includes the following FCC statements for the Syn Pro Air:
- FCC IDs: XGB-15150 & XGB-15153
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
- Non-Modification Statement
CLASS B INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaton.
RF RADIATION EXPOSURE & HAZARD STATEMENT
To ensure compliance with FCC RF exposure requirements, this device must be
installed in a location such that the antenna of the device will be greater
than 2 cm (0.8 in.) from all persons. Using higher gain antennas and types of
antennas not covered under the FCC certification of this product is not
allowed. Installers of the radio and end users of the product must adhere to
the installation instructions provided in this manual. This transmitter must
not be co-located or operated in conjunction with any other antenna or
transmitter.
NON-MODIFICATION STATEMENT
Use only the supplied internal antenna. Unauthorized antennas, modifications,
or attachments could damage the Syn Pro Ar RX & TX Models and violate FCC
regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate this
equipment. Please contact Turtle Beach for a list of approved 2.4 GHz
antennas.
This product is compliant with the Consumer Product Safety Improvement Act of
2008, Public Law 110-314 (CPSIA)
CANADIAN ICES STATEMENTS
I C: I C: 3879A-15150 and 3879A-15153
This device complies with ICES-003 and RSS-247 of Industry Canada.
Operation is subject to the following two condtions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the devce.
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontroed environment.
To prevent radio interference to the licensed service (i.e. co-channel Mobile
Satellite systems) this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equpment (or its transmit antenna)
that is installed outdoors is subject to licensing and not supported by Syn
Pro Air RX & TX Models.
EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION (EFTA) REGULATORY
COMPLIANCE
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries, listed below, are referred to as The European Community throughout
this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND,
FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA,
LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA,
SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity
Marking by this symbol: **
indicates compliance with the Essential Requirements of the EMC Directive of
the European Union
(2014/30/EU). This equipment meets the following conformance standards:
Safety: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013(T-Mark
License),
IEC 60950-1:2005 (2nd Ed.) + Am 1:2009 + Am 2:2013 (CB Scheme Certificate),
EN 62368-1: 2014 + A11 (T-Mark License), IEC 62368-1: 2014 (CB Scheme
Certificate),
EN 50332-1:2013, EN 50332-2:2013, EN71-3:2013
EMC: EN 55032:2015; CISPR 32:2015,
E N 3 014 89 -1 V 2.1.1(2017- 02), E N3 014 89 -17 V 31.1(2016 -11)
EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8:
2010
Radio: EN 300 328v2.1.2 (2019-07)
SAR: EN 62311:2008
Environmental: RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU,
REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC,
Toys Safety Directive 2009/48/EC
Warning:** To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Please visit the following URL for a complete copy of the Declaration of
Conformity: http://www.turtlebeach.com/homologation
To access the rating label:
- Remove the left ear pad by pulling the ear pad straight up using your thumb.
- Once you’ve released the cloth from the lip on top, pull the ear pad straight back and it should slip right off.
To replace the ear pad, follow the same process in reverse.
Warning!
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case, the user may be required to take
appropriate measures.
**** This symbol on the product or its packaging indicates that ths product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate coection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste for
recycling, please contact your local authority, or where you purchased your
product.
Voyetra Turtle Beach Inc. is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging Waste)
Regulations 2007. To fulfil our obligation we are registered with Comply
Direct and their Recycling Room. Here you will find advice and information on
packaging waste management, recycling symbols and the waste hierarchy
principles of reduce, reuse and recycle.
https://www.complydirect.com/the-recycling-room/
https://support.turtlebeach.com/hc/en- us/articles/115000225933?mobile_site=true
CMT ID: 2021DJ7762
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY
10601, USA
© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names
mentioned in this manual may be trademarks or registered trademarks and are
the property of their respective owners. Information contained herein is
subject to change without notice. Voyetra Turtle Beach, Inc shall not be made
liable for any errors that may appear in this manual. This publication or
parts of it may not be reproduced without the express consent of the
publisher.
ROCCAT® is a Turtle Beach Brand
I D014
426-201-004-005
