ROCCAT ROC-11-430 Burst Pro Air Right-hand RF Wireless Bluetooth Mouse User Guide

June 3, 2024
ROCCAT

ROCCAT ROC-11-430 Burst Pro Air Right-hand RF Wireless Bluetooth Mouse User Guide

ROCCAT ROC-11-430 Burst Pro Air Right-hand RF Wireless Bluetooth Mouse User
Guide

PACKAGE CONTAINS

ROCCAT ROC-11-430 Burst Pro Air Right-hand RF Wireless Bluetooth Mouse -
PACKAGE CONTAINS

DEFAULT BUTTON ASSIGNMENT

(no driver installed)

ROCCAT ROC-11-430 Burst Pro Air Right-hand RF Wireless Bluetooth Mouse -
DEFAULT BUTTON ASSIGNMENT

STANDARD

  1. = Left mouse button

  2. = Right mouse button

  3. = Universal scroll

  4. = Scroll up

  5. = Scroll down

  6. = IE Forward

  7. = IE Backward

  8. = DPI Cycle

  9. = Connection mode slider
    (2.4GHz/OFF/Bluetooth®)

  10. = Profile cycle button

  11. = Dongle storage

TECHNICAL FACTS

TECH SPECS BURST™ PRO AIR

  • ROCCAT® Owl-Eye 19K dpi optical gaming sensor (based on PixArt PAW3370)
  • ROCCAT® Titan Switch Optical
  • 100 million click lifecycle
  • Adjustable lift-off distance
  • 50g acceleration
  • On-board memory
  • 1.8m Phantom Flex™ charging cable
  • 81g weight
  • 1000Hz polling rate
  • Default DPI Steps: 400, 800 (Default), 1200, 1600, 3200
  • 400 IPS tracking speed
  • Angle snapping: on/off

SYSTEM REQUIREMENTS

  • Windows® 7 and above (software support)
  • USB 2.0 (or higher)
  • Internet connection (for driver software)

Should you need assistance …

Our support team is ready to help you with any technical questions.
Just send an e-mail to support@roccat.com or visit our website at:

http://www.roccat.com/SUPPORT

INSTRUCTIONS

  1. Plug the USB connector on your ROCCAT® Burst™ Pro Air into any free USB port.
  2. Boot your computer and connect to the Internet.
  3. Navigate to www.roccat.com/downloads and download the latest driver.
  4. Start the software installation process and follow the on-screen instructions

Disposal information

The crossed-out wheelie-bin symbol means that you must not dispose of this product toge- ther with unsorted household waste. As electrical devices can contain harmful substances which may cause environmental damage or harm to your health if not disposed of correctly, please dispose of these products separately. As the end user, you are required by law to dispose of used electrical equipment at an official recycling point. For information about local recycling points, contact your local authority, civic amenity site or the business where you purchased this product. By disposing of electrical products at an official recycling point, you are doing your bit to ensure equipment is recycled correctly and professionally, and our environment is protected.

When purchasing a new product, the retailer will let you hand in old products and dispose of them free of charge provided the product you are handing in is of a similar type and has the same functions as the product you are purchasing.You can hand in small used electrical and
electronic equipment (measuring no longer than 25 cm on any one side) for free and with no obligation to purchase a similar product at electrical and electronic retail outlets with sales areas larger than 400m² or at nearby recycling points designated by the retail outlet. Wherever possible, remove any batteries before disposing of the device. Under law, as a user you face the risk of penalties if you dispose of devices and batteries illegally.

Technical support

Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.roccat.com/support

Please keep this information for later reference.

FEDERAL COMMUNICATIONS COMMISSION (FCC) COMPLIANCE NOTICES

This section includes the following FCC statements for Burst Pro Air

  • FCC ID: XGB-CM300D (Wireless Dongle); FCC ID: XGB-CM300 (Wireless Gaming Mouse)
  • Class B Interference Statement
  • RF Radiation Exposure & Hazard Warning

CLASS B INTERFERENCE STATEMENT

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF RADIATION EXPOSURE & HAZARD STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate this equipment.

INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) COMPLIANCE NOTICES

This section includes the following ISED statements for Burst Pro Air

  • IC: 3879A-CM300 (Wireless Gaming Mouse); IC: 3879A-CM300D (Wireless Dongle)
  • Class B Interference Statement
  • RF Radiation Exposure & Hazard Warning

CANADIAN ICES STATEMENTS

This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF RADIATION EXPOSURE & HAZARD STATEMENT

The product complies with Canada portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

EUROPEAN UNION AND EUROPEAN FAIR TRADE ASSOCIATION
REGULATORY COMPLIANCE

DECLARATION OF CONFORMITY

Hereby, Voyetra Turtle Beach Inc. declares that Burst Pro Air is in compliance with Directive 2014/30/EU(EMC), 2014/53/EU(RED),
2014/35/EU(Safety), 2015/863 amending Annex II to 2011/65/ EC(RoHS), 2012/19/EU (WEEE), 2006/1907/EU (REACH), 94/92/EU (PACKAGING), 2006/66/EU (Battery), Electromagnetic Compatibility Regulations 2016(EMC), Radio Equipment Regulations 2017(Radio), Electrical Equipment Regulations 2016 (Safety), The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

The full text of the EU/UK declaration of conformity is available at the following internet address: http://www.turtlebeach.com/homologation

Radio frequency: 2400MHz
Operating frequency: 2400~2483.5MHz
Max. Output power: 10dBm

GENERAL SAFETY GUIDELINES AND INTENDED USE

  1. Do not open or modify the product.
  2. Not approved changes or modifications may void the operation authority and/or warranty.
  3. In case of trouble or doubt, contact us immediately.
  4. Keep the product away from fire/water/humidity/temperature extremes.
  5. Only use as intended with a compliant PC and connector part.
  6. Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
  7. Don‘t look into the light beam on bottom of the mouse.

VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA

© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher.
ROCCAT® is a Turtle Beach Brand.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Customize your ROCCAT® product and keep it up to date with the latest software and firmware

Download now for Windows® 7 and above at: http://www.roccat.com/DOWNLOADS

Recycle,disposal,FC,CE,ROHS, IC 10, VCI icon

Join the community

Become a ROCCAT member and register your product at:

www.roccat.com/support/register-your-product

Service & support
Easy access to
customer support

Authenticity check
Make sure you
own an original

Exclusive deals
Opt-in for special
offers and downloads

Please use your product’s serial number
(located on the bottom label)

ROCCAT ROC logo

www.roccat.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals