Fosco T-GCH25R Cap Heater User Guide
- June 17, 2024
- Fosco
Table of Contents
Fosco T-GCH25R Cap Heater
Specifications
- Dimensions: 1.38in x 0.76in x 0.50in
- Locking Setscrew: Nylon-tipped, 5/64in [2.0mm] hex
- Clear Aperture: 19.3mm
- Accepts Glass Cell: 25mm
- Heater : HT10KR2 Ring Heater (Factory Installed)
- Heater Leads : Red, 2 places
- Thermistor Leads: White, 2 places
- Weight : 0.1 kg
Product Usage Instructions
Installation
- Ensure the product is powered off and disconnected from any power source before installation.
- Position the product in the desired location ensuring proper ventilation around the clear aperture.
- Secure the product using the provided locking setscrew with a5/64in hex key.
Operation
- Connect the heater leads (red) and thermistor leads (white) to their respective terminals as indicated.
- Power on the product and set the desired temperature using the appropriate controls.
- Monitor the temperature and adjust as needed to achieve the desired heating level.
Maintenance
- Regularly inspect the product for any signs of damage or wear.
- Clean the clear aperture and glass cell periodically to maintain optimal performance.
- If any issues arise, refer to the user manual for troubleshooting steps or contact customer support.
FAQ
- Q: Can the heater be removed for cleaning purposes?
- A : The heater (HT10KR2) is factory-installed and should not be removed for cleaning or maintenance purposes.
- Q: How do I adjust the temperature of the product?
- A : Use the controls provided to adjust the temperature settings based on your requirements. Refer to the user manual for detailed instructions.
DIMENSIONS
PRODUCT DRAWING
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>