Fosco Connect CCH-CS24-E4-P00TE CCH Pigtailed Splice Cassette User Manual
- June 16, 2024
- Fosco Connect
Table of Contents
- Precautions
- Splice Cassette (CCH-CS) Installation — Tight Buffer or Loose Tube FibeR
- Splice Cassette (CCH-CS) Installation — ribbon fiber
- Slack Cassette (CCH-CF) Field Termination — Loose Tube or Ribbon Cable
- Slack Cassette (CCH-CF) Field Termination — Tight Buffer Cable
- Cassette Installation in CCH-01U, CCH-02U, or CCH-03U Closet Connector
- Cassette Installation in CCH-04U Closet Connector Housing
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Fosco Connect CCH-CS24-E4-P00TE CCH Pigtailed Splice Cassette User Manual
Precautions
WARNING: Never look directly into the end of a fiber that may be carrying laser light. Laser light can be invisible and can damage your eyes. Viewing it directly does not cause pain. The iris of the eye will not close involuntarily as when viewing a bright light. Consequently, serious damage to the retina of the eye is possible. Should accidental eye exposure to laser light be suspected, arrange for an eye examination immediately.
WARNING: DO NOT use magnifiers in the presence of laser radiation. Diffused laser light can cause eye damage if focused with optical instruments. Should accidental eye exposure to laser light be suspected, arrange for an eye examination immediately.
CAUTION: Recommend the use of safety glasses (spectacles) conforming to ANSI Z87, for eye protection from accidental injury when handling chemicals, cables, or working with fiber. Pieces of glass fiber are very sharp and have the potential to damage the eye.
CAUTION: The wearing of cut-resistant safety gloves to protect your hands from accidental injury when using sharp-bladed tools and armored cable is strongly recommended. Use extreme care when working with severed armor. There will be a sharp edge where armor is cut. To minimize the chance of injury from the cut armor, cover the exposed edge with a wrap of electrical tape. To minimize the chance of injury from sharp-bladed tools, always cut away from yourself and others. Dispose of used blades and armor scrap properly.
CAUTION: Cleaved or broken glass fibers are very sharp and can pierce the skin easily. Do not let these pieces of fiber stick to your clothing or drop in the work area where they can cause injury later. Use tweezers to pick up cleaved or broken pieces of glass fibers and place them on a loop of tape kept for that purpose alone. Good housekeeping is very important.
Splice Cassette (CCH-CS) Installation — Tight Buffer or Loose Tube FibeR
Fiber Routing
|
---|---
|
Cable Preparation
Splicing Tight Buffer or Loose Tube Fiber
|
---|---
|
|
10 Store up to 38 inches of cable slack under cassette.
Loose Tube Fiber
| Tight-buffer Fiber
Protect tight-buffer fiber with braided tubing, if
needed, for multiple cables or 24-fiber cables.
Splice Cassette (CCH-CS) Installation — ribbon fiber
Ribbon Fiber Preparation and Routing
Protective tubing is requiredfor ribbon splicing application.
NOTE : Ensure length of pigtail is approximately 35 inches from fan-out
body
CRITICAL STEP : Slide tubing
onto ribbon up to the fan-out body.
|
---|---
|
|
|
Ribbon Fiber Splicing
NOTE: Rotate splice organizer 90-degrees from its factory-installed orientation meant for single fibersN to the orientation shown for ribbon fiber splices
Single-fiber Orientation| Mass Fusion Ribbon Orientation
---|---
Rotate splice organizer 90° for ribbon storage.
|
Flex organizer to reinstall.
|
Organizer installed in orientation for ribbon storage.
Splcing Preparation
|
---|---
|
|
Slack Cassette (CCH-CF) Field Termination — Loose Tube or Ribbon Cable
Slack Cassette (CCH-CF) Field Termination — Tight Buffer Cable
Cassette Installation in CCH-01U, CCH-02U, or CCH-03U Closet Connector
Housing
|
---|---
Cassette Installation in CCH-04U Closet Connector Housing
|
---|---
|
Corning Cable Systems LLC
PO Box 489
Hickory, NC 28603-0489
USA 1-800-743-2671
FAX +1-828-325-5060
International +1-828-901-5000 •
http://[www.corning.com/cablesystems](http://www.corning.com/cablesystems)
Corning Cable Systems reserves the right to improve, enhance, and modify the features and specifications of Corning Cable Systems’ products without prior notification. All trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified
© 2011 Corning Cable Systems. All rights reserved. Published in Mexico.