Kitch BaseBOX-30-2DR-HB Modular Cabinet System

Specifications

• Product Model: BaseBOX-30-2DR-HB
• Product Type : Modular Cabinet System
• Origin : 100% Canadian Made

Product Information:

The BaseBOX-30-2DR-HB is a modular cabinet system that offers a beautifully simple design to bring your ideas to life. Designed and manufactured entirely in Canada, this product provides countless possibilities for organizing your space.

Product Usage Instructions:

Inspect the Product:

Before assembly and installation, unwrap and inspect the product. If you find any blemishes, rotate them towards the back of the cabinet as the parts are universal. If a remake is needed due to damages, take photos and email them to hello@mykitch.ca within 15 days of receiving the product.

Tools Required:

• 2 Robertson (square drive) screwdriver or screwdriver bit.

• Hardware needed: 4 screws.

Before Assembly

Before following the assembly steps, assemble the BaseBOX and DrawerBOX by scanning the QR code provided.

Step 1

Align each Drawer Guide with the corresponding hole numbers on each Gable (KPGA). Secure the Drawer Guide using the screws provided. Hardware needed: 4 screws.

Step 2

Pull out the Drawer Guides and place each DrawerBOX on them. Push back until you hear a click sound.

Step 3

Your BaseBOX cabinet configuration is now assembled and ready for use.

FAQ:

• Q : What should I do if I find a blemish on my product?
• A: Rotate the blemish towards the back of the cabinet as the parts are universal. If a remake is needed due to damages, take photos and email them to hello@mykitch.ca within 15 days of receiving the product.

Inspect the Product

A friendly reminder to unwrap and inspect your Kitch products before assembly and installation. You may find a blemish, but no sweat! Our KitchBOX parts are universal, so just rotate the blemish toward the back of your cabinet.
If a remake is required, please take photos of any damages along with the label on the piece and email them to hello@mykitch.ca. We’ll review and advise what the next steps will be for you. You have 15 DAYS from receiving your products to report these to us

Tools Required

• 2 Robertson (square drive) screwdriver or screwdriver bit.

• Hardware needed:

Before Assembly

Before you follow the steps below to assemble your configuration, you will need to assemble the BaseBOX and DrawerBOX by following the QR code below.

INTULLATION INSTRUCTION

Step 1 Align each Drawer Guide with the corresponding hole numbers on each Gable (KPGA). With the Drawer Guide Screws provided, screw through the Drawer Guide holes 4 & 9 into the cabinet gable.

Hardware needed:

Step 2

Pull the Drawer Guides out from the cabinet and align each DrawerBOX onto each of the guides. Push back into place until you hear a “click” sound.

Step 3

Your BaseBOX cabinet configuration is now assembled.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>