Fenix CL26R Pro Multi Beam Rechargeable Lantern Instructions

Fenix CL26R Pro Multi Beam Rechargeable Lantern

CL26R Pro PORTABLE CAMPING

LIGHTING FOR EXTREMES

FENIXLIGHT LIMITED Tel: +86-755-29631163/83/93 Fax: +86-755-29631181 E-mail: info@fenixlight.com Web: www.fenixlight.com Address: 2F/3F, West of Building A, Xinghong Technology Park, 111 Shuiku Road, Fenghuanggang Community, Xixiang Street, Bao’an District, Shenzhen City, Guangdong Province, China

WARNING

• place this lantern out of the reach of children
• Do NOT shine the lantern directly into the eyes of anyone!
• Do NOT place light head near flammable objects as high temperatures can cause objects to overheat and become flammable/ignite!
• NOT use the lantern in inappropriate ways such as holding the unit in your mouth. If the battery were to fail while doing so death or serious injury could result. This lantern will accumulate a lot of heat while operating, resulting in a high temperature of the lantern outer case. Pay close attention to the thermal condition of the lantern to avoid bums.
• Remove the battery from the lantern to prevent accidental activation when the lantern is placed in a closed-in and flammable environment such as pockets and backpacks!
• The LED of this lantern is not replaceable; so the whole lantern will need lo be replaced when the LED reaches the end of its lifespan.

(ENGLISH)FENIX CL26R Pro CAMPING LANTERN

• 650 k.lmens maximum combined output, 15 meters maximum beam diameter. OOses seven groups of high-quality LEDs; with a lifespan of 50,000 hours. O,Powered by a single Fenix ARB-L.21-5000 V2.0 battery. The FenixARB-L 18 series battery can also be used when combined with the ALF-18 battery holder.
• Rotary toggle switch end an electronic switch for fast and convenient operation. @Magnetic top for easy light mounting and hands-free use.
• Multiple lighting combinations for various lighting needs inside the tent or outside the campsite.
• The sturdy retractable hook is perfect for hanging the lantern in your tent or any other area that needs overhead light.
• White and red light sources.
• Universal USB Type-C charging port for fast and convenient charging.
• USB Type-A discharging port, the lantern can be used as a power bank.
• Size: 2.60″ ,. 2.34″ ,. 4.49″/66 ,. 59.5 ,. 114 mm.
• Weight: 7.02 oz11g9 g(excluding battery).

OPERATING INSTRUCTIONS

On/off
With the lantern switched off, rotate the toggle switch to any output to tum on the lantern or press and hold the switch to turn on the lantern.
With the lantern switched on, rotate the toggle switct, to ” l’.> • to turn off the lantern or press and hold Iha switch lo tum off the lantern.

Mode switching

• Mode A is 360′ all-around light mode, Mode Bis Down light mode.
• With the lantern switched off, rotate the toggle switch clockwise lo turn on the lantern and enter Mode A.
• With the lantern switched off, rotate the toggle switch counterclockwise to tum on the lantern and enter Mode B.
• With the lantern switct,ed off, press and hold the switch for 0.5 seconds to enter the Red light mode, press and hold the switch for 0.5 seconds again to exit the Red light mode and turn off the lantern.
• Mode A and Mode B combined lighting:
• In Mode A, press and hold the switch for 0.5 seconds to simultaneously enter Mode B. Press and hold the switch for 0.5 seconds again to exit Mode B.
• In Mode B, press and hold the switch for 0.5 seconds to simultaneously enter Mode A. Press and hold the switch for 0.5 seconds again to exit Mode A.

TECHNICAL PARAMETERS

Note: The above specifications are the test results produced by Fenix through its laboratorytastin – 80%. The true performanca of this product may vary according lo diffarant working environments
“The High output is measured in total of runtime including output at reduced levels due to the built-i

Output Selection
Mode A: Rotate the toggle switch clockwise to select Front–+Low–+Med-+High.
Mcxle B: Rotate the toggle switch COlJ’lterclockwise to select Down 1-+Down 2-+Down

Mode A and Mode B combined lighting:

• In Mode A, simultaneously enter Mode B and single click the switch to cycle through Down 1-+Down 2–+Down 3(Mode A output remains the same).
• In Mode B, simultaneously enter Mode A and single dick the switch to cycle through Front-,. Low ….. Med ….. High(Mode B output remains the same}.
• In Red light mode, single click the switch to select between Red light and Red flash.

BATTERY SPECIFICATIONS

Warning:
*The FenixARB-L18 series battery must be combined with a FenixALF-18 battery holderwhile using. •21700 Li-ion batteries are powerful cells designed for convnercial applications and must be treated with caution and handled with care. Only using quality batteries with circuit protection will reduce the potential for combustion or explosion; cell damage or short circuiting are considered user induced damage and are not covered by any Fenix warranty or Hability.

BATTERY REPLACEMENT

Unscrew the top cap and insert the battery with the anode side (+) towards the down light end, then screw the light cap back on.

CHARGING

1. Open the top anti-dust cover to reveal the USB Type-C charging port and plug the USB-A end of the charging cable into an electrical outlet, then connect the USB Type-C end of the charging cable to the lantern.
2. When charging, the charging indicators wil flash from left to right to display charging status.
3. four indicators will be constant after charging is complete.

Note :

1. Only Front, Low(25 lumens maximum), Down 1, Down 2{25 lumens maximum),Red light, Red flash outputs can be operated while charging.
2. Be sure to close the anti-dust cover once charging is completed.
3. The normal charging time is about 3.5 hours from fully depleted to fully charged with the light off.
4. Mode A and Mode B cannot be operated simultaneously while charging.

POWER BANK FUNCTION

1. 0pen Iha anti-dust cover to reveal Iha discharging port, insert the USB Type-A end of the charging cable into the USB discharging port of the lantern, then connect the USB Type-C end of Iha charging cable to the USB Type-C port of the digital device lo be charged.
2. Tuming the lantern on will automatically start ctiarging your digital device. Toe LED indicators will recede from right to left to indicate the discharging status.
3. With the lantern switched off, either single click the switch, rotate the toggle switch, or press and hold the switch to activate the lantern for device charging.
4.  If the battery voltage is lower than 3.0 V, the lantern will stop discharging automatically.

Note:

1. High output is not available while discharging. If the user selects the High output setting, the lantern will automatically shift to Med output.
2. Mode A and Mode B calYIOI be operated simultaneously while discharging.

BATTERY LEVEL INDICATION

Each time the light is turned on, the indicator(s) will indicate the battery level and will last for 5 seconds. With the light switched off, single click Iha switch to check the battery status. The battery level indica1or(s) will display the battery status for 5 seconds.

• Four lights on: 100% – 80%
• Three lights on: 80% – 60%
• Two lights on: 60% – 40%
• One light on: 40% – 20%
• One light flashes: 20%-1 %

Note: This feature only worl\s with Iha FenixARB-L21-5000 V2.0 battery.

INTELLIGENT OVERHEAT PROTECTION
The lantern will accumulate a lot of heat when used at high output levels for extended periods. When Iha lantern reaches a temperature of 48’C/11 8’F or above, the lantern will automatically step down a few lumens every 0.5 seconds to reduce the temperatura. Whan the temperature drops below 46″C/115″F, the lantern automatically recalls the previously used output level.

LOW-VOLTAGE WARNING

Whan the voltage level drops below the preset level, one indicator flashes to remind you to recharge the battery. To ensure nonnal use, the lantern will not turn off automatically and will work till the battery runs out.

USAGE AND MAINTENANCE

• Disassembling the sealed head can cause damage to the lantern and will void the warranty.

• Keep the lantern fully charged to ensure that all functions are available at any time in the future.

• Fenix recommends using an excellent quality battery.
  lf the lantern will not be used for an extended period, remove the battery, or the lantern could be damaged by electrolyte leakage or battery explosion.

• Recharge a stored lantern every three months to maintain optimum performance of the battery.

• Periodic cleaning of the battery contacts improves the lantern’s performance as dirty contacts may cause the lantern to flicker, shine intennittently or even fail to illuminate  for the following reasons:

• A: Poor battery level.

• Solution: Replace or recharge the battery (Ensure the battery is inserted according to the manufacturer’s specifications).

• B: The threads, PCB board contact or other contacts are dirty.

• Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

• If the above methods don’t work, please contact your authorized distributor.

INCLUDED

Fenix CL.26R Pro camping lantern, ARB-L.21-5000 V2.0 battery, USB Type-C charging cable, Spare 0-ring, User manual, Warranty card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>