behringer VD400 Vintage Delay User Manual

: June 1, 2024
: Behringer

Table of Contents

Safety Instruction
Controls
Limited Warranty
Specifications
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual behringer VD400 Vintage Delay VINTAGE DELAY VD400
Vintage Analog Delay Effects Pedal

Safety Instruction

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
Use only attachments/ accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
**** Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling ofwaste electrical and electronic equipment (EEE). The mishandlingof this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a book case or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.

WARNING

As with all small batteries, the batteries used with this product should be kept away from small children who still put things in
their mouths. If they are swallowed, promptly call your local poison control center
Always remove battery if consumed or if product is to be left unused for a long time
Clean the battery contacts and also those of the device prior to battery installation
Replacement of a battery with an incorrect type that can defeat a safeguard!
Replace only with the same or equivalent type
Replace all batteries of a set at the same time, ensure the batteries are installed correctly with the regard to polarity (+ and -)
disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
Attention should be drawn to the environmental aspects of battery disposal

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Thank you for showing your confidence in us by purchasing the Behringer VINTAGE DELAY VD400. This ultimate effects pedal is desigto deliver amazing delay sounds comparable to state-of-the-art studiprocessors. Thanks to its parameter controls, you’ll have plenty of coosounds at your disposal to handle almost any situation.
The delay effect creates a delay of the input signal with various repetitions. Different tempo settings allow interesting delay effects.

Controls

The REPEAT RATE control adjusts the delay time (repetition rate).
The ECHO control adjusts the effect output level.
The INTENSITY control adjusts the number of repetitions.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4″ TS IN connector to plug in the instrument cable.
The 1/4″ TS OUT connector sends the signal to your amp.
The 1/4″ TS DIR OUT connector sends the unaffected signal to connect, for example, to a separate amp.

If you use the OUT connector only, it will send the affected signal and, when deactivated, the unaffected signal. When using both the OUT and the DIR OUT, the VD400 acts like an A/B box. This means when activated, the OUT sends only theecho signal while the DIR OUT carries the dry signal. When deactivated the OUT is muted while the DIR OUT sends the unaffected signal.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges wita ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
The VD400 has no on/off switch. As soon as you insert the plug into the in connector, the VD400 is on. When not in use, remove the plug from the in connector. This extends the life of the battery.

The SERIAL NUMBER is located at the underside.

Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

Specifications

In

Behringer is constantly striving to maintain the highest professional standards. As a result of these ef forts, modfications may be made from time to time to existing products without prior notice. Specfications and appearance may therefore dif fer from those listed or shown.
Music Tribe accepts no liability for any loss which may be suffered by any person whorelies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered
trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2023 All rights reserved.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer VINTAGE DELAY VD400

Responsible Party Name:	Music Tribe Commercial NV Inc.
Address:	122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address:	legal@musictribe.com

VINTAGE DELAY VD400
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Direc tive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street
London EC4A 4AB, United Kingdom
We Hear You