BOSCH SKS2ITW00E Built In Dishwasher Instruction Manual

BOSCH SKS2ITW00E Built In Dishwasher

Product Information

Specifications

• Product: Dishwasher SKS2ITW00E

Product Information

The Dishwasher SKS2ITW00E is a high-quality appliance designed to efficiently clean your dishes while saving energy.
It comes with various features and functions to ensure a convenient dishwashing experience.

Usage Instructions

Installation and Connection

1. Scope of supply: Check all components provided with the appliance.
2. Installing and connecting the appliance: Follow the installation instructions carefully.
3. Drainage connection: Ensure proper drainage connection for efficient operation.
4. Drinking water connection: Connect the appliance to a suitable water source.
5. Electrical connection: Safely connect the appliance to a power source.

Usage Instructions

1. Familiarizing yourself with the appliance: Understand the controls and features of the dishwasher.
2. Before using for the first time: Perform the initial configuration as per the manual.
3. Water softening system: Set up and maintain the water softening system for optimal performance.
4. Rinse aid system: Adjust the rinse aid amount and ensure proper functioning of the system.
5. Detergent: Use suitable detergents and follow guidelines for adding detergent.
6. Tableware: Handle and arrange tableware properly to avoid damage.

FAQ

• Q: How do I adjust the rinse aid amount?
  • A: To adjust the rinse aid amount, refer to section 12.2 in the user manual for detailed instructions on setting the desired level.
• Q: What detergents are suitable for this dishwasher?
  • A: Suitable detergents are listed in section 13.1 of the manual. Using unsuitable detergents may affect dishwasher performance.

“`

Safety

Observe the following safety instructions. 1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For cleaning household tableware. ¡ in private households and in enclosed spaces in a domestic en-
vironment. ¡ Up to an altitude of 4000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 8 years away from the appliance and power cable. 1.4Safe installation
WARNING Risk of injury! Improper installation may cause injury. When installing and connecting the appliance, follow the instruc-
tions in the manual and installation instructions.
4

Safetyen
WARNING Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the
specifications on the rating plate. Always use the supplied power cable for the new appliance. Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in-
stallation must be properly installed. Never equip the appliance with an external switching device,
e.g. a timer or remote control. When the appliance is installed, the mains plug of the power
cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve. Never cut through the supply hose. The supply hose contains electric power cables.
WARNING Risk of fire! It is dangerous to use an extended power cord and non- approved adapters. Do not use extension cables or multiple socket strips. Only use adapters and power cords approved by the manufac-
turer. If the power cord is too short and a longer one is not available,
please contact an electrician to have the domestic installation adapted.
5

enSafety
Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap-
pliance and installation lines. WARNING Risk of burns!
If the appliance is not installed properly, this may result in burns. With free-standing appliances, ensure that they are installed with
the back panel against a wall. 1.5Safe use
WARNING Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products. WARNING Risk of explosion!
Adding solvents to the interior of the appliance may cause explosions. Never add solvents to the interior of the appliance. Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care programme.
WARNING Risk of injury! Leaving the appliance door open may result in injury. Only open the appliance door to load or unload tableware in or-
der to prevent accidents, e.g. through tripping.
6

Safetyen
Do not sit or stand on the appliance door when open. Knives and utensils with sharp points can cause injuries. Arrange knives and utensils with sharp points in the cutlery bas-
ket with the points downwards, on the knife shelf or in the cutlery drawer.
WARNING Risk of scalding! If you open the appliance door while the programme is running, hot water may splash out of the appliance. Open the appliance door carefully if the programme is still run-
ning. WARNING Risk of tipping!
Overfilling the Baskets may cause the appliance to tip up. Never overfill the Baskets with free-standing appliances.
WARNING Risk of electric shock! An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces. Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli-
ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance
parts or heat sources. Never let the power cord come into contact with sharp points or
edges. Never kink, crush or modify the power cord. 1.6Damaged appliance
WARNING Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never operate an appliance with a cracked or fractured surface. Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains.
7

enSafety
If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap.
Call customer services. Page 48 Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord or the appliance power cable of this appliance
is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service. 1.7Risk to children
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
8

Safetyen
WARNING Risk of crushing! With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath. Keep an eye on children when opening and closing the appli-
ance door. WARNING Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. Keep children away from detergent and rinse aid products. Keep children away from the appliance when open. The water in
the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid. 1.8Safety systems Protect children from possible hazards resulting from the appliance. Depending on the features of the model, the appliance comes with a “Childproof lock”.

Preventing material damage
2.1Safe installation
ATTENTION! Improper installation of the appliance may cause damage. If the dishwasher is installed above
or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances. If there is no information or if the installation instructions do not include the relevant information, contact the manufacturer of these appliances to check that the dishwasher can be installed above or below these appliances. If no information is available from the manufacturer, the dishwasher should not be installed above or below such appliances. To ensure the safe operation of all domestic appliances, continue following the installation instructions for the dishwasher. Only install the dishwasher below a hob after taking into consideration the specified safety clearances. Do not install the dishwasher near heat sources, e.g. radiators, heat storage tanks, ovens or other appliances that generate heat. Contact between the appliance and water pipes may lead to corrosion of these pipes, possibly causing them to leak. Check that there is a distance of at least 5 cm between the appliance and the water pipe. The pipes sup-

plied for the drinking water and waste water connections are not affected here. Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut through water hoses. Only use the water hoses supplied with the appliance or genuine spare hoses. Never re-use water hoses that have been used before. If the water pressure is too high or too low, the appliance may not be able to operate properly. Make sure that the water pressure in the water supply system is min. 50 kPa (0.5 bar) and max. 1000 kPa (10 bar). If the water pressure exceeds the maximum value specified, a pressure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
2.2Safe use
ATTENTION! Escaping water vapour can damage fitted units. When the programme ends, leave
the appliance to cool down for a while before opening the door. Special salt for dishwashers can damage the tub due to corrosion. To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts. Detergent may damage the water softening system. Only fill the dispenser of the water softening system with special dishwasher salt.

10

Unsuitable cleaning agents may damage the appliance. Do not use a steam cleaner. So as not to scratch the finish on
the appliance, do not use sponges with a rough surface or abrasive cleaning agents. To prevent corrosion, do not use sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times before using them for the first time.

Childproof lock

1

The Childprooflock childproof lock lets you protect children from possible hazards resulting from the appliance. Whether the appliance is equipped with a door lock is depending on the features of the specific variant.

3.1Door lock
The door lock is a mechanical safety system and makes it more difficult to open the appliance door. “Opening appliance door”, Page 29

Childproof locken
4.2Saving energy
If you follow these instructions, your appliance will use less electricity and less water. Use the Eco 50 ° programme. a The Eco 50 ° programme is en-
ergy-efficient and environmentally friendly.
4.3Aqua sensor1
The aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the washing water. You can save water with the aqua sensor. Use of the AquaSensor depends on the programme. If the soiling level is low, the washing water is used in the next wash cycle, allowing water consumption to be reduced by 2-4 litres. If the soiling level is higher, the washing water is drained off and replaced with fresh water. In the automatic programmes the temperature and running time are additionally adjusted to the level of soiling.

4Environmental protec- Environmentalprotectionandsavingenergy tion and saving energy
Environmental protection and saving energy
4.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by
type and dispose of them separately.

1 Depending on the appliance specifications 11

enInstallation and connection
5Installation and con- Installationandconnection nection
To ensure proper operation, connect Installationandconnection the appliance to the power and water supply correctly. Observe the specified criteria and the installation instructions.
5.1Scope of supply
After unpacking all parts, check for any damage in transit and completeness of the delivery. If you have any complaints, contact the dealer who sold you the appliance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Dishwasher ¡ User manual ¡ Installation Instructions ¡ Warranty1 ¡ Installation material ¡ Steam guard plate1 ¡ Rubber apron1 ¡ Mains cable ¡ Quick reference guide1
5.2Installing and connecting the appliance
You can position your appliance in a fitted kitchen between wooden and plastic walls. 1. Follow the safety instructions. Follow the instructions for the electrical
connection.

3. Check the Scope of supply and the condition of the appliance.
4. Consult the installation instructions for the installation dimensions required.
5. Set the appliance up so it is level. Make sure that the appliance is standing on the floor securely.
6. Install the drainage connection.
7. Install the drinking water connection.
8. Connect the appliance to the power supply.
5.3Drainage connection
Connect your appliance to drainage connection so dirty water is discharged via the wash cycle.
Installing the drainage connection 1. Consult the installation instructions
supplied for the steps required here. 2. Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts. 3. When doing so, check that the wastewater hose is not kinked, crushed or twisted. 4. Also check that there is no cover in the drainage system preventing the wastewater from being discharged.

1 Depending on the appliance specifications 12

5.4Drinking water connection
Connect your appliance to a drinking water connection.
Installing the drinking water connection Note ¡ If you are replacing the appliance,
you must use a new water supply hose. 1. Consult the installation instructions supplied for the steps required here. 2. Connect the appliance to the drinking water connection using the enclosed parts. Observe the Technical data Page 50. 3. When doing so, check that the drinking water connection is not kinked, crushed or twisted.
5.5Electrical connection
Connecting the appliance to the electricity supply Notes ¡ Please follow the Safety instruc-
tions Page 4. ¡ Connect the appliance to alternat-
ing current only, in the range of 220 – 240 V and 50 Hz or 60 Hz. ¡ Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appliance into a nearby socket. The connection data for the appliance can be found on the rating plate.

Installation and connectionen 3. Check that the mains plug is inser-
ted properly.

13

Familiarising yourself with your appliance

Familiarising yourself with your appliance
6.1Appliance

You can find an overview of the parts of your appliance here.

5
6 4
7 3

2

8

1

1

Rating plate

Rating plate with E number and FD number. The data you need for Customer Service

1 Depending on the appliance specifications

14

Familiarising yourself with your applianceen

2

Detergent dispenser

Add detergent to the detergent dispenser. “Detergent”

3

Cutlery basket1

Cutlery basket Page 20

4

Dispenser for special salt Add special salt to the dispenser for special salt.

“Water softening system”,

5

Spray arm

The spray arm washes the tableware in the basket. If the tableware has not been washed properly, clean the spray arm. “Cleaning the spray arm”,

6

Filter system

7

Basket

8

Dispenser for rinse aid

Add rinse aid to the dispenser for rinse aid.

“Rinse aid system”,

1 Depending on the appliance specifications

6.2Controls

You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions.

1

234 5

987 6
15

enFamiliarising yourself with your appliance

1

ON/OFF button

Switching on the appliance Switching off the appliance Page 30

2

Programme selector

Programmes

3

Start button button and reset

Starting the programme Terminating the programme

4

Display

The display shows information about the remaining running time or the basic settings. You can change the basic settings via the display and the setting buttons. “Changing basic settings”, Page 32

5

Timer programming1

Setting timer programming

6

Additional functions1

Additional functions

7

Water supply display

Display for water supply

8

Rinse aid refill indicator

Rinse aid system

9

Special salt refill indicator

Water softening system

1 Depending on the appliance specifications

16

Programmes

You Programmes can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of soiling and the additional function selected. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. The consumption values can be found in the quick reference guide. The consumption values relate to normal conditions and a water hardness of 16 – 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations.

Programme Intensive 70°
Auto 45-65°

Use

Programme sequence

Tableware:

Intensive:

¡ Washing pots ¡ Pre-Rinse and pans, non- ¡ Clean 70 °C fragile table- ¡ Intermediate ware and cut-rinselery.

¡ Final rinse

Level of soiling:

69 °C

¡ Removing stub- ¡ Drying

born burned or

dried-on food

remnants containing starch

and protein.

When using powder detergent, you can also apply a little to the inside of the appliance door.

Tableware:

Sensor-optimised:

¡ Cleaning mixed ¡ Optimised by

tableware and

sensors decutlery.

pending on the

Level of soiling:

soiling of the

¡ Removing com- washing water.

mon household

food remnants

lightly dried-on.

Additional functions All “Additional functions”,
All “Additional functions”,

17

enProgrammes Programme Eco 50° Glass 40°
Quick 45°
PreRinse

Use

Programme se- Additional funcquence

tions

Dishes:

Most economical: All

¡ Cleaning mixed ¡ Pre-rinse

“Additional func-

dishes and cut- ¡ Cleaning 50 °C tions”

¡ Intermediate

Level of soiling:

rinse

¡ Removing com- ¡ Final rinse

mon household 66 °C

food remnants ¡ Drying

lightly dried-on.

Dishes:

Particularly gentle: ExtraDry

¡ Cleaning delic- ¡ Pre-rinse

“Additional func-

ate tableware, ¡ Cleaning 40 °C tions”, Page 19

cutlery, temper- ¡ Intermediate

ature-sensitive

rinse

plastics,

¡ Final rinse

glasses and

60 °C

stemware in the ¡ Drying

stemware bas-

ket.

Level of soiling:

¡ Removing

lightly adhering

fresh food rem-

nants.

Tableware: ¡ Cleaning delic-
ate tableware, cutlery, temperature-sensitive plastics and glasses. Level of soiling: ¡ Removing lightly adhering fresh food remnants.

Time-optimised: ¡ Cleaning 45 °C ¡ Intermediate
rinse ¡ Final rinse
55 °C

ExtraDry “Additional functions”, Page 19

Tableware:

Cold rinse:

¡ Cleaning all

¡ Pre-Rinse

types of dishes.

Level of soiling:

¡ Cold rinsing, in-

termediate

cleaning.

None

18

7.1Information for test institutes
Test institutes are provided with information for comparability tests, e.g. according to EN60436. These are the conditions for conducting the tests, however they are not the results or consumption values. E-mail enquiries to: dishwasher@testappliances.com The product number (E-Nr.) and the production number (FD) are required here. They can be found on the rating plate on the appliance door.

8Additional functions Additionalfunctions

1

You can find an overview of the addi- Additionalfunctions tional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration.

Additional function ExtraDry

Use ¡ For a better
drying result the final rinse temperature is increased and the drying phase extended. ¡ Especially suitable for drying plastic parts. ¡ There is a slight increase in energy consumption and

Additional functionsen

Additional function SpeedPerfect

Use
the running time is extended. ¡ The running time is shortened by 20% to 50% depending on the washing programme. ¡ Energy and water consumption are increased.

9Features Features
You Features can find an overview of the possible features of your appliance and how to use them here. These features depend on the model of your appliance.
9.1Basket
Arrange the tableware in the basket.

1 Depending on the appliance specifications 19

enBefore using for the first time
9.2Cutlery basket
Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards.

1. Push the lever forwards and fold down the prongs .

1

2

9.3Folding prongs
Use the folding prongs to position tableware securely, e.g. plates.

2. To use the prongs again, fold them back up.
a The prongs audibly click into position.
9.4Height of tableware
You can place tableware with a maximum height of 28 cm in the basket.

You can fold the prongs down to position pans, bowls and glasses better.1
Folding down prongs1 If you do not need the prongs, fold them down.

Before using for the first time

Before using for the first time
10.1Performing the initial configuration
On initial start-up or after a reset to the factory settings, you will need to make settings. Requirement: The appliance has been installed and connected. Page 12 1. Add special salt. Page 22 2. Add rinse aid. Page 24 3. Switch on the appliance. Setting the water softening system.

1 Depending on the appliance specifications 20

Water softening systemen

5. Set the amount of rinse aid to be dispensed.
6. Add detergent. 7. Start the Programme with the
highest cleaning temperature without tableware. To remove any marks from water or other residues, we recommend you operate the appliance without tableware before using it for the first time.
Tip: You can change these settings and other Basic settings at any time.

Water softening system

Hard water leaves limescale on the Watersofteningsystem tub and tableware and parts of the appliance may become blocked. To ensure good dishwashing results, you can treat the water with special salt and the water softening system. To avoid damage to the appliance, water with a hardness above 9 °E must be softened.

11.1Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester.

Water hardness °E 0 – 8 9 – 10 11 – 12 13 – 15 16 – 20 21 – 26 27 – 38 39 – 44

Hardness range
Soft Soft Medium Medium Medium Hard Hard Hard

mmol/l
0 – 1.1 1.2 – 1.4 1.5 – 1.8 1.9 – 2.1 2.2 – 2.9 3.0 – 3.7 3.8 – 5.4 5.5 – 6.2

Setting value
H:00 H:01 H:02 H:03 H:04 H:05 H:06 H:07

Note: Set the water hardness determined on your appliance. “Setting water softening system”, Page 21 With a water hardness of 0 – 8 °E you can dispense with special salt and switch off the water softening system. “Switching off water softening system”, Page 22

11.2Setting water softening system
Set the water hardness on your appliance. 1. Determine the water hardness and
the appropriate setting value. “Overview of water hardness settings”, Page 21 2. Press . 3. Press and hold .

Water softening system

4. Turn the programme selector until the display shows H:04.

5. Release the button. 6. Turn the programme selector until
the required level has been set.

The appliance is set to H:04 at the factory.

7. Press to save the setting.

Special salt

You can use special salt to soften water.
Adding special salt If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the programme starts. The amount of special salt required depends on the water hardness: the higher the water hardness, the greater the amount of special salt required.

ATTENTION! Detergent may damage the water softening system. Only fill the dispenser of the water
softening system with special dishwasher salt. Special salt can damage the tub due to corrosion. To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.

3. Note: Only use special salt for dishwashers. Do not use salt tablets. Do not use table salt. Add the special salt to the dispenser.
a
Funnel 1 Fill the dispenser right up with special salt. The water in the dispenser is displaced and forced out. 4. Place the lid back on the dispenser and turn to close.
11.4Switching off water softening system
Note To avoid damage to the appliance, only switch off the water softening system in the following cases: ¡ The water hardness is max. 26 °E
and you are using combined detergents with salt replacement substances. According to manufacturers, combined detergents with salt replacement substances can generally only be used up to a water hardness of 26 °E without adding special salt. ¡ The water hardness is 0 – 8 °E. You do not need to use special salt.

1 Depending on the appliance specifications 22

1. Press .

2. Press and hold .

3. Turn the programme selector until the display shows H:04.

4. Release the button.

5. Turn the programme selector until the display shows H:00.

6. Press to save the setting.

a The water softening system is switched off and the salt refill indicator is deactivated.

Rinse aid systemen
11.5Regeneration of the water softening system
In order to obtain fault-free function of the water softening system, the appliance performs reheating of the water softening system at regular intervals. Regeneration of the water softening system takes place before the end of the main rinse cycle in all programmes. It will increase the run time and consumption values, e.g. water and electricity.

Overview of consumption values with regeneration the water softening system Here you can find an overview of the maximum additional running time and consumption values during regeneration of the water softening system. You can find the column applicable to your model in the quick reference guide according to its water consumption in the Eco 50° programme.

Water consumption in litres (depending on model)

Regeneration Additional of the water running time

softening

in minutes

system after

x rinse cycles

5

4

4

4

Additional water consumption in litres
2.5 2.5

Additional power consumption in kWh
0.03 0.03

The consumption values specified are laboratory measurements determined in accordance with the currently applicable standard and using the Eco 50° programme and the factory value of the water hardness is set to 16 – 20°E.

Rinse aid system

You can use the rinse aid system Rinseaidsystem and rinse aid to get tableware and glasses rinsed perfectly without marks.
12.1Rinse aid
For optimum drying results, use rinse aid. Only use rinse aid for domestic dishwashers.

23

enRinse aid system
Adding rinse aid If the rinse aid refill indicator lights up, top up with rinse aid. Only use rinse aid for domestic dishwashers. 1. Press the catch on the lid of the
dispenser for rinse aid and lift .
2
1
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can cause excessive frothing during the wash cycle.
4. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.

12.2Setting the amount of rinse aid

If there are streaks or water marks on tableware, change the amount of rinse aid.

1. Press .

2. Press and hold .

3. Turn the programme selector until the display shows r:04.

4. Release the button.

5. Turn the programme selector until the right amount of rinse aid has been set.

The factory setting is level r:04. ­ A low setting adds less rinse aid
during the wash cycle and reduces streaking on tableware. ­ A higher setting adds more rinse aid during the wash cycle, reduces water marks and improves the drying result.

6. Press to save the setting.

12.3Switching rinse aid system off
If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid component, you can switch the rinse aid system off. Tip: The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid. 1. Press . 2. Press and hold . 3. Turn the programme selector until
the display shows r:04. 4. Release the button. 5. Turn the programme selector until
the display shows r:00.

24

6. Press

to save the setting.

a The rinse aid system is switched

off and the rinse aid refill indicator

is deactivated.

13Detergent Detergent

Detergent
13.1Suitable detergents

Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable. For optimum washing and drying results, use separate detergent, adding Special salt Page 22 and Rinse aid Page 23 separately. Modern, powerful detergents mainly use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygenbased bleaching agents are generally used to remove coloured marks, e.g. tea or ketchup. Note: Follow the manufacturer’s instructions for each detergent.

Detergent Tabs
Powder detergent

Description Tabs are suitable for all cleaning functions and do not need to be measured out. With shorter Programmes tabs sometimes do not dissolve entirely and leave residues of detergent. This may impair the cleaning effect. Powder detergent is recommended for shorter Programmes. The dosage can be adjusted to the level of soiling.

Detergenten

Detergent Liquid detergent

Description Liquid detergent works faster and is recommended for shorter Programmes without PreRinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed. This is not a fault and is non-critical if you remember the following: ¡ Only choose a
programme without PreRinse. ¡ Do not select timer programming for starting the programme.
The dosage can be adjusted to the level of soiling.

Tip: Suitable detergents are available online via our website or from Customer Service.

Separate detergents Separate detergents are products that do not contain components other than detergent, e.g. powder detergent or liquid detergent. With powder and liquid detergent the dosage can be individually adjusted to the level of soiling of the tableware. For better washing and drying results and to avoid damage to the appliance, please additionally use Special salt Page 22 and Rinse aid Page 23.

Combined detergent Besides conventional separate detergents, a number of products are available with additional functions.

25

enDetergent

These products contain not only detergent but also rinse aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5in1, …), additional components such as glass protection or stainless steel cleaner. According to manufacturers, combined detergents generally only function up to a water hardness of 26 °E. With a water hardness above 26 °E you will need to add special salt and rinse aid. For the best washing and drying results we recommend using special salt and rinse aid from a water hardness of 17 °E. If you are using combined detergent, the washing programme is adjusted automatically to ensure the best possible washing and drying result.

13.2Unsuitable detergents

Do not use detergent which could cause damage to the appliance or present a risk to health.

Detergent Hand washing-up liquid
Detergent containing chlorine

Description Hand washing-up liquid can cause increased frothing and damage the appliance. Chlorine residue on tableware may present a risk to health.

13.3Information on detergents
Follow the instructions on detergents in everyday use. ¡ Detergents marked as “organic” or
“ecological” (environmentally friendly) generally contain lower levels of active agents or com-

pletely dispense with certain substances. The cleaning effect may be restricted here. ¡ Set the rinse aid and the water softening system to the separate detergent or combined detergent in use. ¡ According to manufacturers, combined detergents with salt replacement substances can only be used up to a certain water hardness, usually 26 °E, without adding special salt. For the best washing and drying results we recommend using special salt from a water hardness of 17 °E. ¡ To prevent sticking, only touch detergents in a water- soluble pouch with dry hands and only ever place them in a dry detergent dispenser. ¡ Even if the rinse aid and special salt refill indicators light up, washing programmes will run properly with combined detergents. ¡ The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid. ¡ Use tablets with a special drying performance.
13.4Adding detergent
1. To open the detergent dispenser, press the locking latch.

26

2. Add the detergent to the dry detergent dispenser.
50 ml 25 ml 15 ml
If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer’s instructions and quantities for dosage in the detergent dispenser. 3. Close the lid of the detergent dispenser.
a The lid clicks into position. a The detergent dispenser will open
automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the appliance and dissolve. Tip: If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the interior door of the appliance.

Tableware

Only Tableware clean tableware that is suitable for dishwashers. Note: Decorated glassware and parts made of aluminium or silver may fade or discolour with dishwashing. Delicate types of glass may turn cloudy after a few washing cycles.

14.1Damage to glass and tableware

Only put glasses and china in the dishwasher if it is marked as dishwasher- safe by the manufacturer. Avoid damage to glass and tableware.

Cause

Recommendation

The following

Only put table- tableware is not ware in the dishwasher-safe: washer if it is

¡ Items of cut- marked as dishlery and table- washer-safe by

ware made the manufacturer.

¡ Decorated glassware, antique and

hand-crafted

tableware

¡ Plastic parts

not resistant to

heat

¡ Tableware

made from

copper or tin

¡ Tableware

soiled with

ash, wax, lub-

ricating grease

or paint

¡ Very small

items of table-

ware

27

enTableware

Cause

Recommendation

The chemical

Use a detergent

composition of marked by the

detergent causes manufacturer as

damage.

gentle on table-

ware.

Highly caustic al- If you are using

kaline or highly highly caustic al-

acidic cleaning kaline or highly

solutions, in par- acidic cleaning

ticular commer- agents, in partic-

cial or industrial ular commercial

cleaners, are not or industrial

safe to use in the cleaning agents,

dishwasher with do not put alu-

aluminium.

minium parts in

the dishwasher

interior.

The water temperature of the programme is too high.

Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay.

14.2Arrange tableware
Arrange tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware. Tips ¡ Using the appliance allows you to
save energy and water compared to washing-up by hand. ¡ See our website for examples of how to load your appliance efficiently. ¡ To save energy and water, load the machine with the number of place settings specified (standard

28

load with tableware and cutlery). “Technical specifications”, Page 50 ¡ For better washing and drying results, position items with curves or recesses at an angle so water can run off.
1. Remove large remnants of food from tableware. To save resources, do not prerinse tableware under running water.
2. Observe the following when arranging tableware: ­ To prevent damage to tableware, arrange it so it is stable and cannot tip over. ­ To prevent injury, arrange cutlery with the points and sharp edges facing down. ­ Position containers with the openings facing down so no water can collect in them. ­ Do not block the spray arm so it can still turn.

14.3Removing tableware
WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. When the programme has ended,
do not empty the appliance until the tableware has cooled down for a while. Check the washing tank and accessories for soiling and clean if necessary. “Cleaning and servicing”, Page 32

Basic operation

15.1Opening appliance door
1. If the childproof lock1 is not activated, open the appliance door.
2. If the childproof lock1 is activated, press the catch of the lock to the right and open the appliance door .
1
2

Basic operationen
15.2Switching on the appliance
Press . The Eco 50° programme is set by default. The Eco 50° programme is an especially environmentally friendly programme and ideal for normally soiled tableware. It is the most efficient programme for the combination of energy/water consumption for this type of tableware and evidences conformity with the EU Ecodesign Directive. If you do not perform any actions on the appliance for 15 minutes, the appliance will automatically switch off.
15.3Setting a programme
To adjust the wash cycle to the soiling level of the tableware, select a suitable programme. Turn the programme selector until
the right programme has been selected. a The remaining running time of the programme appears on the display.
15.4Setting additional functions
You can set additional functions to complete the washing programme selected. Note: The additional functions which can be used depend on the programme selected.

1 Depending on the appliance specifications 29

enBasic operation
Press the button for the relevant additional function.
a The additional function is set and the additional function button flashes.
15.5Setting timer programming
You can delay the start of the programme by up to 24 hours. 1. Press . a “h:01” appears in the display. 2. Use to set the required start
time for the programme. 3. Press . a This activates timer programming. Tip: To deactivate timer programming, press repeatedly until “h:00” appears in the display.
15.6Starting the programme
Press . a The programme has ended when
the display shows “0:00”. Notes ¡ You can only change a pro-
gramme when running if you cancel it. “Terminate programme”, Page 30 ¡ The appliance switches off automatically 1 minute after the end of the programme to save energy. If you open the appliance door immediately after the programme has ended, the appliance will switch off after 4 seconds.
15.7Interrupting programme
Note: When you open the appliance door once the appliance has heated up, leave the door slightly ajar for a few minutes and then close it. This

will help prevent excess pressure building up in the appliance and stop the appliance door bursting open.
1. Press . a The programme is saved and the
appliance switches off. 2. Press to resume the pro-
gramme.

15.8Terminate programme

To end a programme early or to

switch from a programme that has

already started, you will need to cancel it first.

Press 3 seconds.

for approx.

a The programme is cancelled and

ends after approx. 1 minute.

15.9Switching off appliance
1. Please note the information on Safe use Page 10.
2. Press . 3. To prevent damage from dripping
water, turn the water tap off tight (not applicable to appliances with Aqua- Stop). Tip: If you press during the wash cycle, the programme currently running will be interrupted. When you switch the appliance back on, the programme continues automatically.

30

Basic settingsen

16Basic settings Basicsettings

You Basicsettings can configure the basic settings for your appliance to meet your needs.

16.1Overview of basic settings
The basic settings depend on the features of your appliance.

Basic setting

Display text Selection

Description

Water hardness H:04 1

H:00 – H:07

Set the water softening system to your water hardness. “Setting water softening system”, Page 21 Level H:00 switches the water softening system off.

Rinse aid dispensing

r:04 1

r:00 – r:06

Set the amount of rinse aid to be dispensed. “Setting the amount of rinse aid”, Page 24 Switch the rinse aid system off with level r:00.

Intensive drying d:00 1

d:00 – d:01

The temperature is increased during the final rinse, which improves the drying result. This may increase the run time slightly.

Note: Not suitable for delicate items of tableware.

Switch Extra Dry on “d:01” or off “d:00”.

Hot water

A:00 1

A:00 – A:01

Set cold water or hot water connection. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g. solar heating system with circulation line. The water temperature should be at least 40 °C and max. 60 °C. Switch hot water on “A:01” or off “A:00”.

1 Factory setting (may vary according to model)

31

enCleaning and servicing

16.2Changing basic settings

1. Press .

2. Press and hold .

3. Turn the programme selector until the display shows the required set-

ting.

4. Release the button.

5. Turn the programme selector until

the display shows the right value.

6. Press

to save the setting.

Cleaning and servicing

To keep your appliance working effi- Cleaningandservicing ciently for a long time, it is important to clean and maintain it carefully.
17.1Cleaning the tub
WARNING Risk of harm to health! Using detergents containing chlorine may result in harm to health. Never use detergents containing
chlorine. 1. Remove any coarse soiling in the
interior with a damp cloth. 2. Add detergent to the detergent dis-
penser. 3. Select the programme with the
highest temperature. 4. Start the programme without table-
ware.

17.2Self-cleaning interior1
To remove deposits, the appliance self-cleans the interior at regular intervals. The programme sequence is automatically adjusted for self-cleaning, e.g. the cleaning temperature is briefly increased. Consumption values, e.g. water and electricity, may also increase. If the interior is no longer self- cleaned adequately and deposits occur, see this information: “Cleaning the tub”, Page 32.

17.3Cleaning products
Only use suitable cleaning products to clean your appliance. “Safe use”, Page 10

17.4Tips on appliance care

Follow the tips on appliance care to make sure your appliance functions properly at all times.

Action

Benefit

Wipe the door This ensures the seals, the front of parts of the applithe dishwasher ance will remain and the control clean and hypanel regularly gienic. using a damp cloth and washing-up liquid.

If the appliance This will prevent

is not going to unpleasant

be used for a

odours.

while, leave the

door slightly ajar.

1 Depending on the appliance specifications 32

17.5Filter system
The filter system removes coarse soiling from the dishwashing cycle.
3 2

Cleaning and servicingen 3. Pull down the micro filter to re-
move.

1
1 Micro filter 2 Fine filter 3 Coarse filter
Cleaning filters Soiling in the dishwashing water may block the filters. 1. After each wash check the filters
for residue. 2. Turn the coarse filter anticlockwise
and remove the filter system . Check that no foreign objects
fall into the sump.
2
1

4. Press the locking catches together and lift the coarse filter out . 2 1
5. Clean the filter elements under running water. Carefully clean the rim of dirt between the coarse and the fine filter.
6. Re-assemble the filter system. Make sure that the locking catches on the coarse filter click into position.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

33

enCleaning and servicing
17.6Cleaning the spray arm
Limescale and soiling in the dishwashing water may block the nozzles and bearing of the spray arm. Clean the spray arm regularly. 1. Pull up the spray arm to remove.
2. Check the outlet nozzles on the spray arm for blockages under running water and remove any foreign objects.
3. Insert the spray arm. a The spray arm clicks into position.
34

Troubleshooting

You Troubleshooting can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.

WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his Customer Service.

Fault

Cause and troubleshooting

Appliance door will Childproof lock is activated.

not open or cannot be opened easily.

Open the appliance door. Page 29

Fault

Cause and troubleshooting

E:12 lights up.

Appliance has detected calcified heating element. 1. Descale the appliance. 2. Operate the appliance with the water softening
system.1

E:14 lights up.

Water protection system is activated. 1. Turn off the water tap. 2. Call Customer Service Page 48.

E:15 lights up.

Water protection system is activated. 1. Turn off the water tap. 2. Call Customer Service Page 48.

E:16 lights up.

Water is continuously running into the appliance. 1. Turn off the water tap. 2. Call Customer Service Page 48.

E:18 or indicator for Supply hose is kinked. water supply lights up. Install the supply hose without kinks.

Water tap is turned off. Turn on the water tap.

Water tap is jammed or furred up.

1 Depending on the appliance specifications 35

enTroubleshooting

Fault

Cause and troubleshooting

E:18 or indicator for Turn on the water tap. water supply lights up. The flow rate must be at least 10 l/min when the
water supply is open.

The filters in the water connection of the supply or AquaStop hose are blocked. 1. Switch off the appliance. 2. Pull out the mains plug. 3. Turn off the water tap. 4. Unscrew the water connection. 5. Remove the filter from the supply hose

E:22 lights up.1 E:24 lights up.

6. Clean the filter. 7. Re-insert the filter in the supply hose. 8. Screw the water connection back on. 9. Check the water connection for leaks. 10.Restore the power supply. 11.Switch the appliance on. Filters are soiled or blocked. Clean the filters.
“Cleaning filters”, Page 33 Wastewater hose is blocked or kinked. 1. Reposition the wastewater hose without kinks. 2. Remove residues. Siphon connection is still sealed. Check the connection to the siphon and open if ne-
cessary. Cover of the wastewater pump is loose. Secure the cover of the Wastewater pump
Page 47 so it clicks into position.

1 Depending on the appliance specifications 36

Fault E:25 lights up.
E:27 lights up.
Another error code appears on the display. E:01 to E:30

Troubleshootingen
Cause and troubleshooting Wastewater pump is blocked. Clean the wastewater pump.
“Clean wastewater pump”, Page 47 Cover of the wastewater pump is loose Secure the cover of the Wastewater pump
Page 47 so it clicks into position. Mains voltage is too low. This is not a fault on the appliance. 1. Contact an electrician. 2. Have the mains voltage and electrical installation
checked by an electrician. A technical fault is present. 1. Press . 2. Unplug the appliance or switch off the fuse. 3. Wait at least 2 minutes. 4. Insert the mains plug of the appliance in a socket
or switch on the fuse. 5. Switch the appliance on. 6. If the problem occurs again:
Press . Turn off the water tap. Pull out the mains plug. Contact Customer Service Page 48 and give
the error code.

Fault Tableware is not dry.

Cause and troubleshooting No rinse aid used or dosage set too low. 1. Add Rinse aid Page 23. 2. Set the amount of rinse aid to be dispensed.
“Setting the amount of rinse aid”, Page 24
Programme or programme option has no drying phase, or the drying phase is too brief. Select a programme with drying, e.g. intensive,
strong or ECO programme. Some option buttons decrease the drying result, e.g varioSpeed.
Water collects in recesses of the tableware or cutlery.

37

enTroubleshooting
Fault Tableware is not dry.

Cause and troubleshooting Position tableware at an angle where possible.

Plastic tableware is not dry. Cutlery is not dry.
Appliance interior still wet after wash cycle.

The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying performance. 2. Use a different combined detergent with a better
drying performance.
Extra Dry not activated to improve drying performance. Activate Extra Dry. Tableware removed too early or drying process not yet ended. 1. Wait until the programme ends. 2. Only remove tableware 30 minutes after the pro-
gramme has ended.
Rinse aid used has a limited drying performance. Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Not a fault. As plastic does not store heat so well, it also does not dry as well. No remedial action possible. Cutlery not arranged properly in the cutlery basket or cutlery drawer. Droplets can form on the cutlery contact points. 1. Arrange cutlery individually where possible.
Page 28 2. Avoid points of contact.
Not a fault. The condensation drying principle causes water droplets in the tub ­ they are indeed desirable here. The moisture in the air condenses on the inside walls, runs off and is pumped out. No action required.

38

Troubleshootingen

Fault Remnants of food on tableware.

Cause and troubleshooting Tableware is placed too close together or basket is overfilled. 1. Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the tableware. 2. Avoid points of contact. Spray arm rotation is blocked. Arrange tableware so that it does not obstruct spray arm rotation. Spray arm nozzles are blocked. Clean the Spray arms. Filters are soiled. Clean the filters. “Cleaning filters”, Page 33 Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. “Filter system”, Page 33 2. Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Only remove large remnants of food and do not prerinse tableware. Tall narrow receptacles in corner areas are not rinsed adequately. Do not position tall narrow receptacles at too great an angle or in corner areas. Top baskets on right and left are not set to same height. Set the top baskets on the left and right to the same level.

39

enTroubleshooting

Fault

Cause and troubleshooting

Detergent residue in the appliance

Lid of the detergent dispenser is blocked by items of tableware parts and will not open. 1. Arrange tableware in the top basket tableware so
the tab collecting tray is not obstructed by tableware. “Arrange tableware”, Page 28 Items of tableware are blocking the dispenser lid. 2. Do not place tableware or fragrance dispensers in the tablet collecting tray.

The lid of the detergent dispenser is blocked by the tab and will not open. Position the tab in the detergent dispenser cross-
wise, not vertically.

Tabs are used in the quick or short programme. Dissolving time of the tab is not attained. Select a more intensive Programme or use Powder
detergent Page 25.

Washing effect and dissolving performance are reduced after a prolonged storage time or detergent is very lumpy. Change your detergent Page 25.

Water marks on plastic parts.

Due to laws of physics droplet formation on plastic surfaces is unavoidable. After drying water marks are visible. Select a more intensive programme. Position tableware at an angle.
“Arrange tableware”, Page 28 Use rinse aid.
“Rinse aid”, Page 23 Set the water softening system higher.

Wipeable or water-sol- Detergent substances are deposited there. These

uble coatings are

coatings cannot generally be removed with chemicals.

present inside the appliance or on the door.

Change your detergent Page 25. Clean the appliance mechanically. White coating is deposited in the appliance interior.

1. Set the water softening system correctly.

In most cases you will need to increase the setting.

2. Change your detergent if required.

Special salt dispenser is not screwed tight. Screw the special salt dispenser tight.

40

Troubleshootingen

Fault

Cause and troubleshooting

Stubborn white coat- Detergent substances are deposited there. These

ings are present on coatings cannot generally be removed with chemicals.

tableware, inside the appliance or the door.

Change your detergent Page 25. Clean the appliance mechanically.

The hardness range is set incorrectly or the water hardness is greater than 44 °E (6,2 mmol/l). Set the Water softening system Page 21 to the
water hardness or add special salt.

3in1/organic/eco detergent is not effective enough. Set the Water softening system Page 21 to the
water hardness and use separate detergents (proprietary detergent, special salt, rinse aid).

Too little detergent is being used. Increase the amount of detergent used or change
Detergent Page 25.

Washing programme selected too weak. Select a more intensive washing programme.

Tea residue or lipstick Washing temperature is too low. marks on tableware. Select a programme with a higher washing temper-
ature.

Too little detergent is being used or is unsuitable. Use a suitable Detergent Page 25 and follow the
manufacturer’s instructions for the amount to be used.

Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Only remove large remnants of food and do not
prerinse tableware.

Coloured coatings (blue, yellow, brown) that are difficult or impossible to remove are present inside the appliance or on stainless steel tableware.

The formation of films is due to substances contained in vegetables (cabbage, celery, potatoes, noodles, etc.) or tap water (manganese). Clean the appliance.
You can remove deposits with Mechanical cleaning Page 32 or a machine cleaning product. It may not always be possible to completely remove deposits but they are harmless to health.

The formation of films is due to metal components on silver or aluminium tableware. Clean the appliance.

41

enTroubleshooting

Fault

Cause and troubleshooting

Coloured coatings (blue, yellow, brown) that are difficult or impossible to remove are present inside the appliance or on stainless steel tableware.

You can remove deposits with Mechanical cleaning Page 32 or a machine cleaning product. It may not always be possible to completely remove deposits but they are harmless to health.

Coloured deposits

The formation of films is due to ingredients of food

(yellow, orange,

remnants and tap water (limescale) “soaplike”.

brown) that are easy 1. Check the setting of the water softening system.

to remove are present “Setting water softening system”, Page 21

inside the appliance (mainly at the bottom).

Add special salt. “Adding special salt”, Page 22

3. If you are using combined detergents (tabs), activate the water softening system.

Follow the information about detergents. “Information on detergents”, Page 26

Plastic parts inside the Plastic parts inside the appliance may become discol-

appliance are discol- oured during the life of the dishwasher.

oured.

Discolouration can come about and will not impair

functioning of the appliance.

Plastic parts are discoloured.

Washing temperature is too low. Select a programme with a higher washing temper-
ature.

Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Only remove large remnants of food and do not
prerinse tableware.

Removable streaks Amount of rinse aid to be dispensed is set too high.

are present on glasses, glassware with a metallic appearance and cutlery.

Set the rinse aid system to a lower setting. No rinse aid has been added. “Adding rinse aid”, Page 24

Detergent residue is present in the final rinse. Lid of the detergent dispenser is blocked by tableware items and will not open fully.

1. Arrange tableware in the top basket tableware so the tab collecting tray is not obstructed by tableware. “Arrange tableware”, Page 28

Items of tableware are blocking the dispenser lid.

42

Troubleshootingen

Fault

Cause and troubleshooting

Removable streaks 2. Do not place tableware or fragrance dispensers in

are present on

the tablet collecting tray.

glasses, glassware with a metallic appearance and cutlery.

Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.

Only remove large remnants of food and do not prerinse tableware.

Irreversible clouding of glassware.

Glasses are not dishwasher-proof, only suitable for dishwashers. Use dishwasher-proof glasses.
Glasses are usually only suitable for use in a dishwasher, i.e. long-term wear or long-term changes must be expected. Avoid a lengthy steam phase (standing time after wash cycle ends). Use a programme with a lower temperature. Set the softening system to the water hardness. Use detergent with a glass protection component.

Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware.

Cutlery may also rust if washed together with rusting items. Do not wash rusting items.

Salt content in washing water is too high. 1. Remove any spilled special salt from the tub. 2. Screw the cap of the special salt dispenser on tight.

Detergent residue is present in the detergent dispenser or the tablet collecting tray.

Spray arms were blocked by tableware so detergent was not rinsed out. Check that the spray arms are not blocked and can
rotate freely.

Detergent dispenser was damp when detergent was added. Only add detergent to a detergent dispenser when
dry.

Excessive formation of Hand washing-up liquid is present in dispenser for

foam occurs.

rinse aid.

Immediately add rinse aid to the dispenser. “Adding rinse aid”, Page 24

Rinse aid has been spilled.

43

enTroubleshooting

Fault

Cause and troubleshooting

Excessive formation of Remove the rinse aid with a cloth.

foam occurs.

Detergent or appliance care product used causes ex-

cessive foaming.

Change the brand of detergent.

Fault

Cause and troubleshooting

Special salt refill indic- Insufficient special salt.

ator lights up.

Add Special salt Page 22.

Sensor does not detect special salt tablets. Do not use special salt tablets.

Refill indicator for spe- Water softening system is switched off.

cial salt does not light up.

Set the water softening system.

Refill indicator for rinse aid lights up.

Insufficient rinse aid. 1. Add Rinse aid Page 23. 2. Set the amount of rinse aid to be dispensed.

Refill indicator for rinse aid does not light up.

Rinse aid system is switched off. Set the amount of rinse aid to be dispensed.

Fault Water is left in the appliance at the end of the programme.
Appliance cannot be switched on or operated. Appliance does not start.

Cause and troubleshooting

Filter system or area under the filters is blocked. 1. Clean the Filters Page 33. 2. Clean the Wastewater pump Page 47.

Programme has not yet ended.

Wait until the programme ends or cancel the programme with Reset.

“Terminate programme”,

Appliance functions have failed. 1. Pull out the mains plug or switch off the fuse. 2. Wait at least 2 minutes. 3. Connect the appliance to the power supply. 4. Switch the appliance on.

The mains fuse has tripped. Check the relevant fuse.

Mains cable is not inserted. 1. Check whether the socket works. 2. Check whether the mains cable is properly inserted
in the socket and on the rear of the appliance.

Fault Appliance does not start. Programme starts automatically. Appliance stops during the programme or cuts out.
Basic settings cannot be changed.

Cause and troubleshooting Appliance door is not closed properly. Close the appliance door. You did not wait until programme ended. “Terminate programme”, Page 30 Appliance door is not closed properly. Close the appliance door. Power and/or water supply has been interrupted. 1. Check the power supply. 2. Check the water supply.
Top basket is pressing against inner door and preventing appliance door from being closed securely. Check whether the rear panel of the appliance is
being pressed in by a socket or hose holder that has not been removed. Arrange the tableware so that no parts project beyond the basket and prevent the appliance door from closing properly.
A programme is currently running. Changing basic settings is only possible at the start of a programme.

Fault Appliance door cannot be closed.
Lid on the detergent dispenser cannot be closed.

Cause and troubleshooting Door lock has been activated. Close the appliance door with greater force. Door cannot be closed due to installation method. Check whether the appliance has been installed
properly. When closed, the appliance door, its decor or attached parts should not knock against adjacent cabinets or the worktop.
Detergent dispenser or lid are blocked by sticky detergent residue. Remove detergent residue.

Fault Filling valves making knocking noises.

Cause and troubleshooting Caused by the domestic installation. No appliance fault present. Does not affect functioning of the appliance. Can only be remedied in the domestic installation.

45

enTroubleshooting
Fault Knocking or rattling noise.

Cause and troubleshooting Spray arm is striking tableware. Arrange tableware so that the spray arms do not
strike tableware.
With a small load the water jets directly strike against the tub. Distribute the tableware evenly. Load the appliance with more tableware. Light items of tableware move about during the wash cycle. Position light items of tableware securely.

46

18.1Clean wastewater pump
Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. Remove any foreign bodies care-
fully. 1. Disconnect the appliance from the
power supply. 2. Remove the basket. 3. Remove the filter system. 4. Scoop out any water.
Use a sponge if necessary. 5. Loosen the screws on the pump
cover (Torx T 20).

Transportation, storage and disposalen 6. Pull up and remove the pump
cover.
7. Remove any remnants of food and foreign bodies in the interior.
8. Insert the pump cover, press down and screw firmly in place.
9. Install the filter system. 10.Insert the basket.
19Transportation, stor- Transportation,storageanddisposal age and disposal
Transportation, storage and disposal
19.1Removing the appliance
1. Disconnect the appliance from the mains power supply.
2. Turn off the water tap. 3. Detach the drainage connection. 4. Detach the drinking water connec-
tion. 5. Pull the appliance out carefully,
along with the hose behind it.
19.2Protect appliance from frost
If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely. Empty the appliance.
“Transporting the appliance”, Page 48
47

enCustomer Service
19.3Transporting the appliance
To avoid damage to the appliance, empty it before transporting. Note: Always transport the dishwasher upright to prevent residual water getting into the machine’s controls and damaging the appliance. 1. Remove tableware from the appli-
ance. 2. Secure loose parts. 3. Turn on the water tap. 4. Switch on the appliance.
Page 29 5. Select the programme with the
highest temperature. 6. Start the programme. Page 30 7. To drain the appliance, terminate
the programme after approx. 4 minutes. “Terminate programme”, Page 30 8. Switch off the appliance. Page 30 9. Turn off the water tap. 10.To empty the residual water out of the appliance, detach the supply hose and let the water drain out.

19.4Disposing of old appliance Valuable raw materials can be reused by recycling.

WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Customer Service

Function-relevant CustomerService genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website.

If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
20.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the appliance’s rating plate. The rating plate is located inside the appliance door. Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.
20.2AQUA-STOP guarantee1
In addition to warranty claims against the seller under the purchase agreement and in addition to our manufacturer’s warranty, we will provide a replacement under the following conditions. ¡ If our Aqua-Stop system is defect-
ive and causes water damage, we will make good the damage for private users. To ensure protection from water damage, the appliance must be connected to the power supply. ¡ The liability guarantee is valid for the service life of the appliance. ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and connected with Aqua-Stop according to our instructions; this also includes correctly fitting the Aqua-

Customer Serviceen Stop extension (genuine accessory). Our guarantee does not cover defective supply lines or fittings up to the Aqua-Stop connection on the tap. ¡ If your appliance is fitted with Aqua-Stop, you can leave your appliance unattended during operation and the tap turned on afterwards. The tap only needs to be turned off if you are away from home for a long period, e.g. on holiday for several weeks.

1 Depending on the appliance specifications 49

enTechnical specifications

21Technical specifications Technicalspecifications

Technical specifications
Weight Voltage Power rating Fuse Water pressure
Inlet rate Water temperature
Capacity

Max.: 24 kg 220 – 240 V, 50 Hz or 60 Hz 2000 – 2400 W 10 – 16A ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Min. 10 l/min Cold water. Hot water max.: 60 °C 6 place settings

More information about your model can be found online at https://eprel.ec.europa.eu/qr/19950161. This web address is linked to the official EU EPREL product database.

1 Only applies to countries in the European Economic Area 50

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration ­ also on mobile phones: www.bosch- home.com/welcome

Looking for help? You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com
A Bosch Company
9001941961
9001941961 (040527) 550 EG en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Home Appliances Global Website | Bosch
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>