HIKMICRO LYNX Pro Series Thermal Monocular User Guide
- June 1, 2024
- HIKMICRO
Table of Contents
Thermal Monocular
LYNX S & LYNX Pro SERIES 
https://www.hikmicrotech.com/en/contact- us.html
Introduction
HIKMICRO LYNX S & LYNX Pro thermal monocular supports hot tracking, video and
snapshot, app connection and so on. The high-sensitivity built-in thermal
detector provides you with clear view even in total darkness. The monocular is
mainly applied to scenarios such as hunting and outdoor nature observation.
Package Content
The package includes: Device (× 1), Type-C Cable (× 1), Lint-free Cloth (× 1),
Protective Bag (× 1), Wrist Strap (× 1), and Quick Start Guide (× 1).
Appearance
The appearance may vary according to different models. Please take the actual
product for reference.
- Lens Cover: Protects the lens from dust or scratch.
- Focus Ring: Adjusts focus to obtain clear targets
- Buttons: To set functions and parameters.
- Diopter Adjustment Knob: Adjusts the dioptricsetting.
- Eyepiece: The piece placed closest to the eye to view the target.
- Charging Indicator: Indicates the charging status of the device.
- Type-C Interface: Power the device or transmit data with a type-C cable.
- Tripod Mount: Mounts the tripod.
- Wrist Strap Hole: Mounts the wrist strap.
Button Description
Button| Description|
---|---|---
| Power| Press: Standby mode/Wake up device. | Hold: Power on/off.
| Capture| Non-Menu Mode:
Press: Capture snapshots. | Hold: Start/Stop recording videos.
Menu Mode: Press to move up.
| Mode| Non-Menu Mode:
Press: Switch palettes. | Hold: Enter the menu.
Menu Mode:
Press: Confirm/Set parameters. | Hold: Save and exit the menu.
| Zoom| Non-Menu Mode:
Press: Switch digital zoom. | Hold: Correct non-uniformity of display (FFC).
Menu Mode: Press to move down.
Charge Device Steps:
- Lift the type-C interface cover.
- Connect the device and power adapter with a type-C cable to charge the device.
- Check the charging indicator status: Flashing Red & Green: Error occurred. | Solid Red: Charging. | Solid Green: Fully charged.
Note
- The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).
- Charge the device for more than 5 hours before first use.
- The built-in battery type is 18650, and the battery size should be 24 mm × 72 mm. The rated voltage and capacity are 3.635 VDC/3350 mAh.
App Connection
https://play.google.com/store/apps/details?id=com.hikvision.hikmicrosightGooglex
itmsapps://itunes.apple.com/cn/app/id1580659649?mt=8
- Firmware Upgrade
- Browse and Download
- Remote Control
- Preview
- HIKMICRO Academy
- Online Service
Steps:
-
Scan the QR code to download and install the app.
-
Select in the device menu to enable hotspot.
-
Turn on WLAN of your phone and connect to the device hotspot.
Hotspot Name: HIKMICRO_Serial No.
Hotspot Password: Serial No. -
Open the app and connect your phone with the device. You can view device interface on your phone.
More Operations
Scan the QR code below to obtain the user manual for more operations.
http://enpinfo.hikmicrotech.com/analysisQR/showQR/3c594743
Legal Information
© Hangzhou Microimage Software Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, due to firmware updates or other reasons. Please find
the latest version of this Manual at the HIKMICRO website
(www.hikmicrotech.com).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
Trademarks
and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in
various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS
IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF
THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHERDAMAGES
RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKMICRO WILLPROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE
LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO
THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR
ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSE WHICH IS
ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT
FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS,
ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATTER PREVAILS.
Regulatory Information
** These clauses apply only to the products bearing the corresponding mark
or information.
EU Compliance Statement This product and – if applicable – the supplied
accessories too are marked with “CE” and comply therefore with the applicable
harmonized European standards listed under the Directive 2014/30/EU (EMCD),
Directive 2014/35/EU (LVD), Directive 2011/65/EU (RoHS), Directive 2014/53/EU.
Hereby, Hangzhou Microimage Software Co., Ltd. declares that this device
(refer to the label) is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://www.hikmicrotech.com/en/support/downloadcenter/declaration-
of-conformity/
Frequency Bands and Power (for CE)
The frequency bands and transmitting power (radiated and/or conducted) nominal
limits applicable to the following radio equipment are as follows: Wi-Fi 2.4
GHz (2.4 GHz to 2.4835 GHz), 20 dBm For the device without a supplied power
adapter, use the power adapter provided by a qualified manufacturer. Refer to
the product specification for detailed power requirements. For the device
without a supplied battery, use the battery provided by a qualified
manufacturer. Refer to the product specification for detailed battery
requirements.
** Directive 2012/19/EU (WEEE Directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the purchase
of equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
** Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive):
This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union.
See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance**
This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss. Please read all the safety
information carefully before using.
Laws and Regulations
Use of the product must be in strict compliance with the local electrical
safety regulations.
Transportation
- Keep the device in original or similar packaging while transporting it.
- Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper.
- Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities.
- Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.
Power Supply
- The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A) according to the IEC62368-1 standard. Please refer to actual products and technical specifications for detailed information.
- Make sure the plug is properly connected to the power socket.
- DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.
- The power source should meet limited power source or PS2 requirements according to IEC 62368-1 standard.
Battery
- The built-in battery type is 18650, and the battery size should be 24 mm × 72 mm. The rated voltage is 3.635 VDC, and the battery capacity is 3350 mAh.
- For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur.
- CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
- Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types).
- Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion.
- Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas.
- Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
- Dispose of used batteries according to the instructions.
- The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.
- DO NOT place the battery in the reach of children.
- DO NOT swallow the battery to avoid chemical burns.
Maintenance
- If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
- Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
- If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
- Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
- Make sure the running environment meets the requirement of the device. The operating temperature shall be -20 °C to 55 °C (-4 °F to 131 °F), and the operating humidity shall be from 5% to 95%.
- DO NOT expose the device to high electromagnetic radiation or dusty environments.
- DO NOT aim the lens at the sun or any other bright light.
- Place the device in a dry and well-ventilated environment.
- Avoid equipment installation on vibratory surface or places subject to shock (neglect may cause equipment damage).
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang
District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co.,
Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export
controls in various countries or regions, including without limitation, the
United States, European Union, United Kingdom and/or other member countries of
the Wassenaar Arrangement. Please consult your professional legal or
compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal
series products between different countries.
Hikmicro Hunting.Global
Hikmicro Hunting.Global
HIKMICRO Outdoor
HIKMICRO
www.hikmicrotech.com
support@hikmicrotech.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>