bsaunas Halden XXS Square Log Sauna Instruction Manual

bsaunas Halden XXS Square Log Sauna

Specifications:

• House Model : HALDEN XXS 40
• Material : Wood
• Dimensions: 2070mm x 1980mm x 1965mm
• Components : Various framing, boards, moldings, windows, doors, benches, ventilation components
• Fasteners : Screws, nails

Product Usage Instructions

Assembly

1. Start by assembling the floor framing components (AR1-AR5) according to the provided drawings.
2. Attach the floorboards (PL-1) and roof boards (KL-1) to complete the base structure.
3. Add the floor/ceiling/roof moldings (PP-1) and roof edge support (RLT-1) for additional support.
4. Install the gable edge board (RL-1) to complete the frame.

Windows and Doors

• Install the window/door components (FR-1, FR-2, UPL55-1, UPL95-1, UPL95-2, UPL95-3) as specified in the manual.
• Mount the glass door and window using the provided door knobset.

Bench Modules

• Assemble the bench modules (BENCH MODULE 600×1992, BENCH MODULE 400×1992) and attach bench supports and additional vertical bench support for stability.

Ventilation and Drainage

• Install wooden ventilation louvers and metal ventilation grids for airflow.
• Add drainage components for water management.

Fasteners

• Use the specified screws and nails to secure various components together as per the instructions provided.

FAQ

• Q: Are additional tools required for assembly?
  • A : Basic tools such as a screwdriver, hammer, and measuring tape are recommended for assembly.
• Q: Can the house model be customized?
  • A: While some customization may be possible, it is advised to follow the provided instructions to ensure structural integrity.

HOUSE: HALDEN XXS 40

PL-1| FLOORBOARD|  | 18+2| 24×112| 1965
KL-1| ROOF BOARD|  | 23+2| 24×112| 2484
PP-1| FLOOR/CEILING/ROOF MOULDING|  | 11+1| 15×55| 2100
RLT-1| ROOF EDGE SUPPORT|  | 2| 45×45| 2480
RL-1| GABLE EDGE BOARD|  | 4+1| 18×95| 2550

FR-1| FRAME PIECES FOR 1680×1860 WINDOW/DOOR| ****

1 SET

| 2| 45×45| 1680
FR-2| 2| 45×45| 1950
UPL55-1| MOULDINGS FOR 1680×1860 WINDOW/DOOR| ****

1 SET

| 2| 15×55| 1820
UPL95-1| 1| 18×95| 1640
UPL95-2| 1| 18×95| 1890
UPL95-3| 2| 18×95| 1915
UPL-1| EXTRA MOULDING|  | 2| 18×95| 2100
 | DESCRIPTION| NOTE| PCS.
---|---|---|---

DOORS/WINDOWS

| GLASS DOOR 88x690x1860|  | 1

WINDOW 88x495x1860|  | 2

DOOR KNOB SET FOR GLASS DOOR|  | 1
 | DESCRIPTION| NOTE| PCS.
---|---|---|---

COMPONENTS

| BENCH MODULE 600×1992|  | 1
BENCH MODULE 400×1992|  | 1
BENCH SUPPORTS SET 45×45 (560-3PCS, 375-2PCS)|  | 1
ADDITIONAL VERTICAL BENCH SUPPORT 45x45x1000| ADJUSTABLE| 1

3MM SLOPE BOARD| 1996MM| 1
6MM SLOPE BOARD| 1996MM| 1
9MM SLOPE BOARD| 1996MM| 1
12MM SLOPE BOARD| 1996MM| 1

WOODEN VENTILATION LOUVER D100|  | 2
METAL VENTILATION GRID D100|  | 2
DRAINAGE 2000+| OPENS RIGHT| 1
 | DESCRIPTION| PCS.
---|---|---

FASTENERS

| 3.5×50 SCREW FOR FLOOR BOARDS| 200
3×40 STAINLESS SCREW FOR DOOR/WINDOW MOULDINGS| 100
4.2×55 STAINLESS SCREW FOR ROOF EDGE BOARDS| 50
4.5×60 SCREW FOR ROOF EDGE SUPPORT| 30
4.5×70 SCREW FOR BENCH MODULES AND FIXING DOOR TO WALL| 100
5×90 SCREW FOR FLOOR FRAMING AND CONNECTING WALL LOGS WITH FLOOR FRAMING|

70

6×120 SCREW FOR WALL LOG INTERSECTIONS| 200
6×180 SCREW FOR PURLINS, CONNECTING WALL LOGS WITH FLOOR FRAMING AND WALL LOGS| ****

30

75MM NAIL FOR ROOF BOARDS| 200

BASE PLAN

FLOOR FRAMING 45×95

FASTENING WALL LOGS

• Fasten the first row to the floor framing. Use 5×90 screws for half logs (fix those first) and 6×180 screws for full logs. It is recommended to predrill holes. If necessary use a rubber hammer and hit the block to secure logs tightly on top of each other.

• Use 6×120 screws in each intersectionTry to alternate the placement of drill holes so screws don’t end up on top of each other. It is recommended to pre drill the holes.

• Framing should be 5mm inside from the outer wall.

WALL 1

WALL 2

WALL A

WALL B

• Add slope boards and drainage details before fixing floorboards.
• When placing drainage, fix the closed end temporarily *5mm higher than an opened end to guarantee slope towards the outer wall for water. After placing floor boards fix it permanently with floor moldings.
• Fasten floor boards with screws from the tongue side of the board. First board should be – placed ~5mm from wall and when cutting the last board make sure there is 5mm gap as well. Leave ~2mm gap between floor board (cross cut sides) and walls. Lastly fix mouldings in place.

ROOF BOARDS

1. Fix purlins with 6×180 screws (predrill holes).
2. Fix roof boards with 75mm nails (two pieces for each connection)
3. Fasten roof edge support and board. Use 4,5×60 screws lone for every other board ending) to fix edge support. For edge boards use 4,2×55 srews.
4. Cut gable edge boards to length and fix with 4,2×55 screws.

FASTENING DOORS/WINDOWS

1. Screw together a 45×45 frame nicely using [vOl Crowe
2. Fix frame to door/windows with 4,5×70 screws. Remember that the 45×45 frame goes inside the house.
3. Lift door/windows in place and fasten it by screwing 4,5×70 screws through wall to the frame.
4. Fasten moldings with 3×40 screws. Mouldings on sides should cover about 10mm and upper moulding should cover about 20mm.

DOOR/WINDOW MOULDINGS

FASTENING BENCH MODULES

This is an overall manual for bench modules. You can skip some of the steps depending on the set (for example if there is no bench skirt). Precise heights for bench supports and benches can be found on the next page.

1. fise gue be seen wil ait support for. stronger connection.
2. Lift modules in place and fix them to the supports on the walls. Do not install the upper module in case there is a bench skirt in set.
3. Lift the bench skirt in place, attach it to the wall from the sides and to the lower bench in the middle. There should be 8mm gap between the lower bench and the bench skirt.
4. Place the upper module and fix it in place as described in step two.

CROSS-SECTION OF SAUNA ROOM AND HEIGHT OF BENCH MODULES

Use 4,5×70 screws to fasten bench supports to walls and to fix benches to already fixed supports. The lower module position is approximate (can be placed according to your own preferance).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>