KENWOOD CA-GRL98SG Fairing Metal Mesh Speaker Grilles Instruction Manual

KENWOOD CA-GRL98SG Fairing Metal Mesh Speaker Grilles

Product Information

• Product: CA-GRL98SG
• Manufacturer: JVCKENWOOD Corporation
• Product Type: Fairing Metal Mesh Speaker Grilles
• Description: This kit includes mesh parts designed to replace the front speaker grille cloth on 1996-2013 HD Street Glides, Ultras, Classics, and Standards.

Product Usage Instructions

1. Ensure that the product is compatible with your specific motorcycle model (1996-2013 HD Street Glides, Ultras, Classics, and Standards).
2. Before installation, make sure to visit the following website for any updated information or the latest Instruction Manual: https://manual.kenwood.com/en_contents/search/
3. Prepare the necessary tools for installation, including a screwdriver or any other required equipment.
4. Remove the existing front speaker grille cloth from your motorcycle.
5. Take out the metal mesh parts from the CA-GRL98SG kit.
6. Align the metal mesh parts with the speaker openings on your motorcycle’s fairing.
7. Securely attach the metal mesh parts to the fairing using the provided screws or any recommended method of installation.
8. Ensure that the metal mesh is properly fixed and does not obstruct the speaker functionality.
9. Perform any necessary processing on the metal mesh, such as powder coating, polishing, chroming, or other custom applications. Double-check that the metal mesh is not warped or damaged during any processing.
10. Once the metal mesh is securely installed and processed, test the speakers to ensure they are functioning correctly.

Note: For any further assistance or troubleshooting, refer to the Instruction Manual or contact the manufacturer directly.

CA-GRL98SG
FAIRING METAL MESH SPEAKER GRILLES DESIGNED AND ENGINEERED FOR 1996-2013 HARLEY-DAVIDSON® FLH MODEL MOTORCYCLES
INSTRUCTION MANUAL JVCKENWOOD Corporation

Important Notes

©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon® are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle® and Tour-Pak® are trademarks or registered trademarks of Harley- Davidson, Inc. and/or its affiliates and if used or implied are for reference only. There is no affiliation between Harley-Davidson, Inc. and/or its affiliates and JVCKENWOOD Corporation and/or its affiliates. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation

NOTE: The mesh parts in this kit are designed to replace the front speaker grille cloth on 1996-2013 HD Street Glides, Ultras, Classics, and Standards.

Installation procedure

1. Remove your outer fairing.
   NOTE: A towel or something similar is suggested to be placed over your front fender to help in preventing dings or scratches during installation.

2. Remove the speaker/grille assembly from the bike.
   NOTE: The factory grille cloth is glued to a plastic mesh, and together, is two-way taped to the main body of the grille assembly. You can usually peel away the mesh from the body of the grille by hand. With the factory grille cloth/mesh off, you should see the exposed two-way tape used to hold the factory mesh on the main grille body. In most cases, the factory two-way tape will hold the new mesh in place, but the new two-way tape is supplied in the box if you need it (most adhesives work best at room temperature or higher).

3. Take a moment and ensure the new mesh is oriented so everything lines up properly and then re-install the speaker/grille assembly into the fairing.

NOTE: For custom applications, the metal mesh is thick enough that it should not warp during powder coating, polishing, chroming, or other similar processing.

For updated information (the latest Instruction Manual, etc.), please visit the following website:
https://manual.kenwood.com/en_contents/search/

References

• Manual Download | Kenwood

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>