XPOtool MIG100 Flux Inverter Welder Instruction Manual
- June 1, 2024
- XPOtool
Table of Contents
XPOtool MIG100 Flux Inverter Welder
Product Information
Product Overview
The document provides details on the XPO MIG-110 Inverter MIG MAG Welder, including safety instructions, operational guidelines, control panel features, wire spool insertion, technical specifications, troubleshooting, and recycling information.
Contact Information
For service inquiries, please contact:
service@wiltec.info or use the contact form
available at https://www.wiltec.de/contacts/.
Documentation and support can be found at https://www.wiltec.de/docsearch.
Visit https://www.XPOtool.com for more information from The Tool Experts.
Safety Instructions
Important safety guidelines are provided for operating the MIG-110 welder,
emphasizing the use of appropriate protective gear during welding operations.
Work Area Setup
Guidelines for setting up the work area for welding processes are
described.
Control Panel
The control panel of the MIG-110 welder is detailed, with descriptions of
LED indicators, output current adjustments, and other features.
Figures
Two figures are presented illustrating the control panel (Figure 1) and the
side view of the welder (Figure 2), with numbered components for reference.
Specifications:
- Model: MMA-110
- Input Voltage: 1~220 V
- Frequency: 50 Hz
- Relative Duty Cycle: 35%
- Wire Diameter: IP21S
- Wire Coil: Standard size
Product Usage Instructions:
Safety Instructions:
During operation, always wear welding helmet, gloves, long-sleeved
clothing, and long pants.
Work Area:
Ensure the work area is well-ventilated and free from flammable materials.
Welding:
Follow proper welding techniques and ensure all connections are secure
before starting the welding process.
Control Panel:
- LED Indicator: Indicates the status of the machine.
- Output Current Adjustment: Use this to adjust the welding current as needed.
- Fan: Ensures proper cooling during operation.
Wire Coil Installation:
Insert the wire coil with the appropriate spacer and locking screw as shown
in the manual.
Troubleshooting
Common issues and their solutions are outlined for scenarios such as the welder not functioning correctly or the breaker tripping unexpectedly during operation.
Recycling Information
The importance of recycling materials is highlighted to reduce the
consumption of raw materials.
Manufacturer Information
The document concludes with the manufacturer’s information, including the
company name, address, and regulatory compliance numbers.
WITec Wildanger Technik GmbH
DE-52249 Eschweiler
WEEE-Reg.-Nr.: DE45283704
Please note that the above HTML content is a transcription based on the provided images and text input. The actual content, including specific instructions, troubleshooting guidelines, and technical specifications, has been redacted and represented with placeholders due to the redacted text in the images. The placeholders ensure the format and structure are conveyed correctly, even though specific details are not available.
FAQ
Common Issues and Solutions:
Issue: Machine is powered on, LED indicator is off, fan is not working,
and no welding current.
Solution: Check power supply and connections to ensure proper
functioning. Contact customer support if issue persists.
Issue: Machine is powered on, fan is not working, and no output current.
Solution: Verify connections and try resetting the machine. If problem
continues, seek technical assistance.
Issue: Machine is powered on, welding works fine but circuit breaker
trips suddenly.
Solution: Check for any short circuits or overloads in the system. Ensure
proper grounding and consult an electrician if needed.
Issue: Machine is powered on, but welding current is too low during
operation.
Solution: Adjust the output current settings on the control panel to
achieve the desired welding current.
Note: Recycling materials helps reduce raw material consumption. Please recycle responsibly.
How can I contact customer service for the MIG-110 welder?
You can contact customer service by emailing
service@wiltec.info or using the contact form at
https://www.wiltec.de/contacts/.
Where can I find documentation and support for the MIG-110 welder?
Documentation and support are available at https://www.wiltec.de/docsearch.
What should I wear when operating the MIG-110 welder?
When welding, always wear a welding helmet, gloves, long-sleeved clothing, and
long pants.
What are the technical specifications of the MIG-110 welder?
The welder operates with a voltage input of 1~220V and a frequency of 50Hz. It
has a relative duty cycle of 35% and uses IP21S welding wire.
What should I do if my welder is not functioning properly?
Refer to the troubleshooting section for common problems and their solutions.
If issues persist, contact customer support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>