victron energy MPPT WireBox-M BlueSolar and Smartsolar MPPT Charge Controller Installation Guide
- June 1, 2024
- victron energy
Table of Contents
Victron energy MPPT WireBox-M BlueSolar and Smartsolar MPPT Charge
Controller
Product Information
- The MPPT WireBox-M is a mounting accessory designed for use with MPPT solar charge controllers.
- It is manufactured by Victron Energy and is intended to streamline the installation process of MPPT controllers.
Specifications
- Product Name: MPPT WireBox-M
- Manufacturer: Victron Energy Designed for use with MPPT solar charge controllers
- Material: Steel base
Product Usage Instructions
- Step 1: Mounting the Steel Base
- Before installing the MPPT controller on the wall, attach the steel base to the controller using the provided hardware.
- Step 2: Securing Cables
- Once the MPPT controller is securely mounted on the wall, ensure that the cables are properly secured to prevent any accidental disconnections.
- Step 3: Attaching the WireBox Cover
- Place the WireBox cover over the MPPT controller and fasten it using the two screws provided. This cover helps protect the controller from dust and debris.
FAQs
- Q: Can the MPPT WireBox-M be used with all MPPT controllers?
- A: The MPPT WireBox-M is specifically designed to be compatible with MPPT solar charge controllers from Victron Energy. It may not be suitable for use with controllers from other manufacturers.
- Q: Is the installation of the WireBox-M difficult?
- A: The installation process of the WireBox-M is straightforward and can be easily completed by following the provided quick installation guide. Ensure to follow all safety precautions and guidelines during installation.
INSTALLATION STEPS
- STEP 1: Mount the ‘steel base’ to the MPPT before installation to the wall.
- STEP 2: After mounting the MPPT to the wall, secure the cables.
- STEP 3: Place the WireBox cover and fasten it with two screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>