wad SW012 Ultrasonic Hair Treatment Clip User Manual

June 1, 2024
wad

wad SW012 Ultrasonic Hair Treatment Clip

wad-SW012-Ultrasonic-Hair-Treatment-Clip-PRODUCT

Thank you for purchasing this product
We are sure you will appreciate the care taken in designing and implementing it. We constantly research and combine innovation and technology to create high-quality products. We apply the most advanced methods and use the best materials to always obtain excellent performance. We offer products designed for the most demanding customers who want to achieve excellent results. Read these instructions carefully before using the appliance and keep them for future reference.

Warnings
Please read the following warnings and the rest of the manual carefully before using the appliance.

  1. Attention: Do not use the hair straightener near a bath, shower, sink or any other recipient containing water.

  2. Do not operate the appliance with wet hands, in a damp environment or on wet surfaces. Do not dip into water or other liquids. If the appliance falls into water, do not touch the water and unplug it immediately.

  3. If the power cord is damaged, it must be replaced immediately by the manufacturer, an authorized service agent or a qualified professional only.

  4. Keep the power cord away from the plates. Do not pull, wring or wind it around the unit.

  5. This appliance must never be left unattended when plugged in.

  6. Use this appliance only for its intended use as described in this manual.
    IMPORTANT! Failure to follow all these warnings and instructions may cause irreparable damage to the product and jeopardize the user’s safety.

  7. Do not use accessories that have been modified or not been approved by the manufacturer.

  8. Never drop or insert any object into any opening.

  9. Do not use outdoors or in areas where aerosol (spray) products are used or where oxygen is administered.

  10. Keep the straightener out of children’s reach. A bad use could be harmful for them.

  11. For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit supplying the bath is recommended. Ask your installer for advice.

  12. IMPORTANT! Cleaning and maintenance of the straightener shall not be done by unattended children. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not use the unit as a toy.

  13.  This appliance is intended for professional use.

Warnings
Please read the following warnings and the rest of the manual carefully before using the appliance.

This symbol indicates that this product should not be treated as normal household waste. Once you have decided to dispose of it, you should take it to a dedicated collection point for the recycling of electrical appliances. By recycling batteries and electrical appliances correctly, we help to prevent health hazards and protect the environment. If this product is irreparably damaged or, for any reason, its useful life is deemed to have expired, please have a look at local, state and European regulations regarding the proper disposal and recycling of products containing lead, batteries, plastics and other materials, as well as collection points for these types of products.

Cleaning and maintenance

  • To preserve the durability of your product and to remove dirt build-up, wipe the unit with a soft, dry cloth when it is unplugged.
  • Always switch the appliance off when not in use.
  • Clean the unit before storage.
  • Store the appliance and power cord in a dry place when not in use.
  • Any other maintenance must be carried out by an authorized service technician.

Technical specifications

Technical specifications hair straightener KARE (MODEL SW012)

  • Voltage 100-240 V
  • Frequency 50/60 Hz
  • Output adapter: 35 V DC, 1.500 mA
  • Power 18 W
  • PTC heater
  • Ultrasound plate
  • Ultrasound frequency 36.000 vibrations/s
  • Infrared plate
  • Infrared wavelength: 680 nm
  • Display with time and intensity adjustment
  • Rotating power cord 2,5 m, UE socket
  • Plate dimension 90 x 22 mm
  • Weight 465 g

Worldsell S.L.
C/ de la Mora 22 · 08918 Badalona, Spain

Instructions for use

  1. Make sure your hands are dry and clean. Plug the straightener into the socket. The luminous display will blink. The device will remain in standby mode.
  2. Turn on and off the device by pressing on the ON/OFF switch for more or less a second.
  3. Once the straightener is working, press on the ON/OFF switch to select the time and mode (ultrasound or infrared).
  4. Adjust the time and intensity by means of the +/- switches.
  5. The ultrasound will work during the selected time. Once you open and close the straightener again, they start working again. This feature is conceived to ensure proper maintenance.

Water test:

  1. Plug the straightener into the socket and place the silver ultrasound plate onto the lower side.
  2. Pour some water drops on the plate, close the straightener as if the plates were about to touch each other and some steam should appear thanks to the ultrasound that help water evaporate.

Attention : steam shows that ultrasound is properly working. Steam appears only when you make the water test. If you use a mask, ultrasound might not produce any steam, but this does not necessarily mean that ultrasound is not properly working.

The treatment results with this straightener are the following:

  1. Hair will be healthier and will have a more intense colour.
  2. Hair will become thicker, stronger, silkier and brighter.
  3. Hair texture will be softer and they will obtain more body.
  4. The more damaged the hair is, the more evident the results will be.
  5. The higher the quality the mask used, the better the results on the hair. Infrared helps restore damaged hair and stimulates circulation while also allowing to close the cuticle and to have a healthier and more nourished hair.

Ultrasound vibration allows proteins and water molecules to better penetrate into the scalp. The combination of these 2 technologies allows, without the need to heat hair and with a minimal cuticle opening, repairing them more efficiently by increasing their nourishment, their elasticity and preventing them from breaking.

Instructions for use

  1. Wash your hair, apply yourself a massage and make sure you get rid of all kinds of foreign bodies.

  2. Rinse them with tepid water.

  3. Dry them (but not completely, only around an 80%) with a hair drier at low temperature and power.

  4. Divide them into locks.

  5. Apply some mask, some conditioner cream or a hydrating or repairing product while you apply a massage. Wait for 15 minutes.

  6. Pass the straightener on each lock from 3 to 5 times so that the product applied is completely absorbed.
    Attention! This process is not for straightening hair but for helping them to better absorb nutrients.

  7. After 10-15 minutes or before the hair is completely dry, rinse it with tepid water and dry it.

  8. Unplug the straightener and clean the plates.

Guarantee

This document from Worldsell S.L. is valid as a guarantee certificate for the product. All claims must be made to:

  • Worldsell S.L.
  • C/ de la Mora 22
  • 08918 Badalona, Spain

The warranty period against manufacturing defects is 6 months from the date of purchase. The warranty does not cover damage resulting from improper use of the product or failure to follow the manufacturer’s instructions.

  • Date of acquisition:
  • Signature and stamp of the sales outlet:

contact

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals