TUREWELL Allwinner H616 Android TV Box Quad Core Box User Manual
- June 1, 2024
- Turewell
Table of Contents
TUREWELL Allwinner H616 Android TV Box Quad Core Box
Getting Started
Basic Operations
Power On/ Off and Sleep
- Cose. ait muse rother pile a i use go ox lo the pover adaptor, Connect
- After the device and cable connected, the power led turned to blue.
- After the device and cable are disconnected, the Power LED turns off
- Under power-on mode, press the remote control’s power button, the device enters into sleep mode.
- Under sleep mode, the device will wake when you press the remote control’s power button,
Open applications
Use the remote control’s arrow keys to choose the wanted program, and click the OK button to open the selected program
Switch in the applications
Click “My Apps” to view recently used programs, and click the program icon to switch applications arbitrarily
Close Applications
Click the icon to view recently used programs, choose one of them by clicking and hold drag it to the blank area to close the application
This function only operated in the condition of Mouse mode
Back To Home Screen
Click icon to to return to the home screen
Click icon on the remote control to return to the home screen
Read External Storage Data
- Read U Disk
- Insert U flash disk or removable hard disk into USB port in the status of power on, icon USB appears in top left corner of the desktop, open “FileBrowser”, the identified USBA:) will
Read TF card
Insert TF card into the device in the status of power on, when icon appears in
top left
corner of the desktop, open “FileBrowser”, and the identified External Storage
Card will appear under “Local Disk”, The TF card’s operation is available now
WIFI Function
- Home Screen → Settings Network→ Select “Wi-Fi” to open the WIFI function
- Choose hotspot Input Password → Connect to the network
Ethernet Function
- Home Screen → Settings Network→ Select “Ethernet” to open the Ethernet function
- Insert the network cable, network will be connected automatically
WLAN Hotspot
Operations on the box :
- Select “Set up Wi-Fi hotspot” to set up “Network SSID” “Security” “Password” parameters
- Home Screen → Settings → Other More Setting Portable hotspot → Select”Portable Wi-Fi hotspot”
- Ensure connected to the wired network, the box can be used as a wireless AP to support more wireless device access in the family
The Step that how to reflash the box
- Uncompress the downloaded firmware(ROM) to the root of and SD/T card (format your card first).
- Insert the SD Card into a powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of Box, and press and hold the hidden button while plugging power in.Do not release until you see the screen of Robert Logo.
- The update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
- When the system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>