Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim Instruction Manual

June 1, 2024
SPEAKMAN

INSTRUCTIONS FOR MODELS
CPT-16000

TOOLS AND SUPPLIES

Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim -
Phillips

IMPORTANT

  • Do not over-tighten any connections or damage may occur.
  • Be sure to read instructions thoroughly before beginning installation.

SAFETY TIPS

Cover your drain to prevent loss of parts.

MAINTENANCE

Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners. Please contact Speakman for any clarification of acceptable cleaners.

WARRANTY

Warranty information can be found at: www.speakman.com

  1. Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure with supplied screws (2).Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim - screws

  2. Verify the position of the Spindle within the Mounting Plate, as shown below. If the end of the Spindle extends beyond the Mounting Plate, then use the Shallow Mount Adapter. If the end of the Spindle is flush to, or is within the Mounting Plate, then use the Deep Mount Adapter.
    FOR SHALLOW MOUNT APPLICATION FOR DEEP MOUNT APPLICATION

  3. Confirm that Valve is in the “Off” position. Place appropriate Connector (1) on to the Spindle of the Valve, making sure to orient the Connector so that one set of Splines are in a perfectly vertical position. Secure Connector with 8-32 screw provided (2).Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim - Valve

  4. Place Escutcheon (3) onto Mounting Base. Take care to align the Escutcheon as shown below.Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim - Mounting Base

  5. Align Handle Assembly (8) with Connector and Escutcheon. Keep Handle (8A) in a stationary vertical position as you thread Handle Hub (8B) onto the Mounting Base. Tighten until snug and the octagonal shapes are aligned.Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim - Connector

CPT-16000 REPAIR PARTS

Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim -
PARTS

ITEM NO. PART NO. DESCRIPTION
1 2 3 RPG05-0874 ASSEMBLY SCREWS AND ADAPTERS
4 RPG05-0961 HOT/COLD INDICATOR BUTTONS

CPT-16000 ROUGH-IN DIAGRAM

Speakman CPT-16000 Opera Polished Chrome Pressure Balance Valve Trim -
DIAGRAM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals