DURASHOCK MUB2F Modular Universal Rubber Bump Stops Instruction Manual
- June 1, 2024
- DURASHOCK
Table of Contents
DURASHOCK MUB2F Modular Universal Rubber Bump Stops
Product Information
Specifications
- Product Name: Add-on Bump Stop module for MUB series
- Compatible Models: MUB1, MUB1A, MUB1B, MUB1C, MUB1D, MUB1E
- Manufacturer: Dura-Shock
- Location: Southern California, USA
Product Usage Instructions
Installation
Contact info@dura-shock.com for any
installation queries.
Attaching MUB2(F) to MUB1X
Use the provided rubber glue to permanently attach the MUB2(F) module to
the MUB1X.
Using Multiple MUB2(F) Units:
- For heavy loads, jack up the vehicle to install multiple MUB2(F) units to MUB1A for better support.
- The combination of MUB series will connect the vehicle frame and the leaf spring/axle for a smoother ride on rough roads.
Differences between MUB2F and MUB2
MUB2F (40HA) has a softer hit on the bump stop compared to MUB2 (50HA) for
a more comfortable ride but with less loading capacity.
FAQ
-
Q: What is the difference between MUB2F and MUB2?
A: MUB2F (40HA) has a lower hardness than MUB2 (50HA), providing a softer hit on the bump stop and a more comfortable ride. -
Q: How many units can be stacked for optim al performance?
A: Add as many MUB2(F) units as needed to fit your driving criteria and support requirements.
Including: MUB1, MUB1A, MUB1B, MUB1C, MUB1D and MUB1E
Add-on Bump Stop module for all MUB series
Please contact us at info@dura-shock.com
immediately if you have any questions about installing MUBS on your vehicle.
We are a US company located in Southern California.
(Do not Copy) MUBS is Patent Pending. This instruction is part of an installation manual that is under Copyright Protection by DuraSHOCK®
WARNING : Customers require common automotive safety practices during the installation. We recommend hiring a professional with mechanical knowledge. DuraShock is not responsible nor be held liable for incorrect or faulty installations.
- The MUB2(F) is a stackable unit that assists in obtaining Various Suspension
- Support needs. Add as many MUB2(F)’s to fit your driving criteria.
- Use the included rubber glue to permanently attach the MUB2(F) module to the MUB1X.
Tip: For occasional heavy loads on the rear end of vehicle, you can jack up the ve- MUB2(F) hicle to install as many MUB2(F) to MUB1A so the combination of the MUB series will lightly connect vehicle frame and the leaf spring/axel. After releasing the lift, the bump stop will be used as an in between cushion. This will provide a smoother ride on rough road conditions and fast rebound after passing through dips or potholes.
Note: MUB2F (40HA) is identical to MUB2 (50HA) but has a lower hardness. MUB2F features a softer hit on the bump stop and a more comfortable ride, but will support less loading or towing capacity.
| Model | Shore Hardness |
|---|---|
| MUB2F | 40HA |
| MUB2 | 50HA |
Added to MUB1
Added to MUB1A
Added to MUB1B
Added to MUB1D
www.dura-shock.com E-mail: info@dura- shock.com Tel: 562-287-4973