DOLGABA Rain Shower Head Straight Arm Instruction Manual
- June 1, 2024
- DOLGABA
Table of Contents
DOLGABA Rain Shower Head Straight Arm
Parts
| NO | Name |
|---|---|
| 1 | Escutcheon Plate |
| 2 | Circular hanging pipe |
| 3 | Thread seal Tape |
Dimension
The size is for reference only, please refer to the actual product.
Installation
- Insert the decorative cup from the side of the 1/2NPT thread of the hanging pipe.
- After putting the hanging pipe into the decorative cup, wrap an appropriate amount of raw material tape, and then fasten the hanging pipe to the water pipe in the wall.
- Install your own overhead shower on the hanging pipe.
In order to keep the surface clean and bright, please clean the product regularly, the cleaning method is as follows:
- Use clean water and a soft cloth to remove surface dirt as much as possible.
- Use one of the cleaners listed below to remove surface dirt
- Mild liquid cleanser.
- Colorless glass cleaner that completely dissolves non-abrasive, powdered cleaners (mix according to manufacturer’s directions)
- Non-abrasive polishing fluid
- Never use abrasive cleaners, abrasive cloths or paper towels.
- Never use any acidic cleaning agents.
- After cleaning, please immediately remove all detergents with clean water and dry them with a soft cotton cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>