SKYLIGHT PRI-55 Hyperspot F/r Hyperbar Instruction Manual

SKYLIGHT PRI-55 Hyperspot F/r Hyperbar

Product Information

Specifications:

• Product Name: SKYLIGHT
• Compatible Products: HYPERSPOT F/R, HYPERBAR PRI-55
• Control Module: AQCT-3
• Connection Type: WiFi

Product Usage Instructions

Connection Stages:

1. Connect your lamp to the mains power supply – it will blink once to indicate the WiFi control module is powered up.
2. Your WiFi-controlled product can be operated in 2 ways:
   • AP (Access Point) connection:
   • Connect your smartphone directly to the product WiFi network starting with AP_lamp***.
   • Use the SL Control app on your smartphone to interact with the lamp.
   • Home WiFi network connection:
   • Connect your device to your home WiFi network through the SL Control app.

Using the AP Connection:

1. Your product comes with a QR code containing the password to the AP_lamp*** network.
2. Scan the QR code with your smartphone camera or manually enter the password to connect to the AP_lamp*** network.
3. Confirm the connection and start the SL Control app to manage your lamp’s settings.

Using the WLAN Connection Mode:

1. Connect to the AP_lamp*** network and start the SL Control app.
2. Register your device in the Connections menu to send your home WiFi password to the lamp.
3. Select your home WiFi network from the list displayed in the app and complete the setup process.

FAQ :

• Q: What should I do if I encounter slow connection or connection problems?
  • A: If you experience slow connection or problems, ensure that the signal level of your WiFi network is strong enough (above -60 dB) for optimal performance. It is recommended not to operate with a signal level lower than -70 dB.

Connection stages

1. After connecting your lamp to the mains power supply it will blink once. This means, that the WiFi control module is powered up.
2. Your WiFi-controlled product can be operated in 2 ways:
   • a) AP (Access Point) in which you connect your smartphone directly do the product WiFi network, which has a WiFi network name starting with AP_lamp*** phrase). If you check the list of WiFi networks visible for your smartphone you will see the AP_lamp network there:
   • indicates a unique code name of the Access Point WiFi network of your device.
   • b) By connecting your device to your home WiFi network.
3. Using the AP (access point) connection:
   • a) Your product has come equipped with a QR code. This barcode contains a password to the AP_lamp*** access point network.
   • b) You can connect to the AP_lamp network by starting up a camera in your smartphone and scanning the barcode. You can also simply copy the AP_lamp network password, which is given below the barcode on your product.
   • c) IMPORTANT: You may be asked, if you allow for this connection. You may be asked if you want to keep this connection. You will be informed, that there is no internet connection when you are connected to the AP_lamp*** network. This is all normal, because
   • AP_lamp network is just an Access Point network to your SKYLIGHT lamp and therefore does not provide an internet connection. You simply need to confirm, that you allow and want to keep the connection with the AP_lamp network.
   • d) You can now start up the SL Control app, which you can download either from App Store or google play:
   • e) If you had connected to the AP_lamp***** of your product you should see the following scree

WiFi controlled luminaires

4.Using the WLAN connection mode:
a) Connect to the AP_lamp***** network and start the SL Control app. AP_lamp connection is needed to send your WiFi password to your lamp, so that it could connect to your home WiFi network. Press “register device” in the Connections menu in the SL Control app.

b) A list of available WiFi networks should be displayed now. You will also see the signal level of the WiFi network. Number closer to 0 means a stronger signal. Signal level down to -60 is considered strong enough. In the -60 to -70 range you may encounter slow connection and connection problems. Operating with signal level lower than -70 dB is not recommended.

c) After you have provided the home WiFi password, the WiFi controller of your lamp will attempt to connect to your Home WiFi. Depending on various settings on your smartphone this may result in automatic reconnection to your home WiFi or not.Go to your smartphone WiFi settings and connect to your phone to your home WiFi. Restart the SL Control app. You should now be able to control your lamp without the need to connect to its access point AP_Lamp*** network.

In case you would like to see the device registration process live we have prepared YouTube videos in which this is shown:

SL_Connection manual for WiFi controlled

• www.skylight.blue

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>