RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction Manual

June 1, 2024
RUBBERSHOX

RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction Manual

RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction
Manual

[email protected]

(Do not Copy) MUBS is Patent Pending. This instruction is part of an installation manual that is under Copyright Protection by RubberShox®
WARNING : Customers require common automotive safety practices during the installation. We recommend hiring a professional with mechanical knowledge. Rubber Shox is not responsible nor be held liable for incorrect or faulty installations.

For Vehicles

Chevrolet 1999-2006 Silverado 1500, 2007 Silverado 1500 Classic, GMC 1999-2006 Sierra 1500, 20078 Sierra 1500 Classic

Installed Vehicle

2006 Chevrolet Silverado 1500

RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction Manual -
Installed Vehicle

Tip : Jack up the truck for easier access to remove and install the bump stops.
Note : Always put a wheel stop on the front end before installation.

Factory Bump Stop Removal

Grab the bump stop, turn, and pull down the bump stop out of the socket

Bump Stop Installation

Twist/Wedge and push the MUB1D into the empty socket.

Combinations

  1. MUB1D directly replaces the original factory bump stop.

  2. MUB1D + MUB2
    Results: Smooth and fast rebound after hitting speed bump or curb side.
    For light loading/unloading

  3. MUB1D + MUB2 + MUB2
    Results: Increase vehicle stability under constant or occasional light loading conditions.

RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction Manual -
Increase vehicle stability

MUB1D
MUB1D – Direct Bump Stop replacement for Chevy 1999-2006 Silverado 1500, 2007 Silverado 1500 Classic, GMC 1999-2006 Sierra 1500, 20078 Sierra 1500 Classic

MUB2
MUB2 – Optional add on to MUB1D to add support and ground clearance for vehicle rear suspension. You can add as many MUB2 as you want to fit your needs.
Please use included rubber glue if you want to permanently attach MUB2 module to MUB1D.

Tip : For occasional light to medium load on the rear end, you can jack up the vehicle to install as many MUB2 to MUB1D so the combination of the MUB series will lightly connect vehicle frame and the leaf spring/axel.
After releasing the lift, the bump stop will be used as an in between cushion.
This will provide a smoother ride on rough road conditions and fast rebound after passing through dips or potholes.

RUBBERSHOX MUB1D Modular Universal Rubber Bump Stop Instruction Manual -
MUB2

www.rubbershox.com E-mail: [email protected] Tel: 562-287-4973

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RUBBERSHOX User Manuals

Related Manuals