RUBBERSHOX UCSBH12344 Universal Front-Rear Automobile Coil Spring Buffer Installation Guide
- June 1, 2024
- RUBBERSHOX
Table of Contents
RUBBERSHOX UCSBH12344 Universal Front-Rear Automobile Coil Spring Buffer
Specifications
- Front Coil Springs: Modular Universal Coil Spring Buffer UCSBH12344 (with module 1 and 4)
- Rear Coil Springs: Modular Universal Coil Spring Buffer UCSBM12344 for the rear (with Module 1, 2, and 3)
- Ground Lifting Height: Front +0.5, Rear +0.5
Product Usage Instructions
Front Coil Springs
Rear Coil Springs
Install UCSBH12344 – Module 1 and 4 for this case.
Before installing the from buffer, the ground clearance is 7”. Ground clearance after installed UCSBH1 and UCSBH4 – 0.5” increased
We installed UCSBM12344 for rear coil springs. UCSBM1, 2 and 3 modules are
assembled to install in the rear coil springs.
Ground clearance before installation – 23.5” to reference line. After installed the UCSBM1,2, and 3 assembly, the ground clearance increased 0.5”.
Safety Precautions:
Before starting the installation process, please ensure to follow these safety precautions:
- Always wear safety glasses.
- Use both a hydraulic jack and jack stand during the installation.
Installation Process
Front Coil Springs (UCSBH12344):
- Ensure the vehicle is parked on a level surface.
- Use a hydraulic jack to lift the front of the vehicle and secure it with jack stands.
- Remove the old front coil springs carefully.
- Install the new Modular Universal Coil Spring Buffer UCSBH12344 with modules 1 and 4 in place.
- Lower the vehicle and test the new front coil springs.
Front Coil Springs: Modular Universal Coil Spring Buffer UCSBH12344 (with module 1 and 4)~
Rear Coil Springs (UCSBM12344):
- Follow the same safety precautions as mentioned above.
- Lift the rear of the vehicle using a hydraulic jack and secure it with jack stands.
- Remove the existing rear coil springs.
- Assemble modules 1, 2, and 3 of the Modular Universal Coil Spring Buffer UCSBM12344 for the rear.
- Lower the vehicle and check the rear coil springs for proper installation.
Rear Coil Springs: Modular Universal Coil Spring Buffer UCSBM12344 for the rear (with Module 1, 2, and 3)
FAQ
Q: Can I install these coil springs myself?
A: We recommend that this installation be done by a professional or a person
with auto-mechanical knowledge to ensure safety and proper installation.
Q: What is the contact information for further assistance?
A: For any inquiries or assistance, you can visit our website at
www.rubbershox.com, email us at
[email protected], or call us at
562-287-4973.
www.rubbershox.com
E-mail: [email protected]
Tel: 562-287-4973