RUBBER SHOX MUB1 Modular Universal Rubber Bump Stop Light Instruction Manual
- June 1, 2024
- RUBBER SHOX
Table of Contents
Including: MUB1, MUB1A, MUB1B, MUB1C,
MUB1D and MUB1E
MUB1 Modular Universal Rubber Bump Stop Light
Add-on Bump Stop module for all MUB series
Please contact us at info@rubbershox.com
immediately if you have any questions about installing MUBS on your vehicle.
We are a US company located in Southern California.
(Do not Copy) MUBS is Patent Pending. This instruction is part of an
installation manual that is under Copyright Protection by RubberShox
WARNING : Customers require common automotive safety practices during the
installation. We recommend hiring a professional with mechanical knowledge.
RubberShox is not responsible nor be held liable for incorrect or faulty
installations.
The MUB2(F) is a stackable unit that assists in obtaining Various Suspension
Support needs. Add as many MUB2(F)’s to fit your driving criteria.
Use the included rubber glue to permanently attach the MUB2(F) module to the
MUB1X.
Tip: For occasional heavy-loads on the rear end of vehicle, you can jack
up the vehicle to install as many MUB2(F) to MUB1A so the combination of the
MUB series will lightly connect vehicle frame and the leaf spring/axel. After
releasing the lift, the bump stop will be used as an in between cushion. This
will provide a smoother ride on rough road conditions and fast rebound after
passing through dips or potholes.
Note: MUB2F (40HA) is identical to MUB2 (50HA) but has a lower hardness.
MUB2F features a softer hit on the bump stop and a more comfortable ride, but
will support less loading or towing capacity.
| Model | Shore Hardness |
|---|---|
| MUB2F | 40HA |
| MUB2 | 50HA |
Examples 
www.rubbershox.com
E-mail:service@rubbershox.com
Tel:562-287-4973