SIDLER 47 Wall Mount Including Side Mirrors Kit Instruction Manual

SIDLER 47 Wall Mount Including Side Mirrors Kit

Product Information

Specifications:

• Product: Wall Mount Kit including Side Mirrors for Mirrored Bathroom Cabinets
• Version: 2.0

Product Usage Instructions

Mounting the Mounting Bracket:
a) Mount the mounting bracket (pos. 2) according to the schematic drawings below. Recommend height: center of mounting holes at 77”. Make sure that the mounting bracket is fastened to at least one wall stud. Use the correct anchors for the different types of walls.

• Drywalls, hollow brick walls: Drill holes 3/8” (10mm) for the anchors pos.4
• Brick walls, concrete walls: Drill holes 1/4 (6mm) for pos.5

Check the mounting rail with a level before proceeding with the next steps.

Mounting the Side Kits:

• b) Mount the side kits as per the provided instructions.

Centering and Fastening the Mirror Cabinet:

• c) Center the mirror cabinet over the vanity and fasten it at the lower mounting holes using anchors (pos.4 or pos.5).

Connecting Electric Cables:

• d) Proceed with connecting the electric cables as per Operation Instructions Quadro Step 6.

FAQ:

• Q: What is covered under the limited warranty?
  A: The limited warranty covers defects associated with the product for two years from the date of delivery, subject to specific conditions including professional installation, proper use, and timely reporting of defects.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of burns, fire, electric shock, or injury:

• This product is for household use only
• WARNING – do not use outdoors
• WARNING – use this furnishing only for its intended as described in these instructions
• WARNING – never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like
• WARNING – never drop or insert any object into any opening
• WARNING – avoid dispensing of aerosol sprays near top of the cabinet

*SAVE THESE INSTRUCTIONS

LIST OF ALL COMPONENTS TO BE INSTALLED

INSTALLATION GUIDE

• Step 1 – Mounting bracket

  • a) Mount the mounting bracket (pos. 2) according to the schematic drawings below. Recommend height: center of mounting holes at 77’’. Make sure that the mounting bracket is fastened to at least one wall stud. Use the correct anchors for the different types of walls.
    Drill holes 3/8’’ (10mm) for the anchors pos.4 or 1/4″ (6mm) for pos.5 Check the mounting rail with a level before proceeding with the next steps.

• Step 2 – Preparing wiring

  • a) Bend the two flaps open at the back of the mirrored cabinet
  • b) Mount the side kits

• Step 3 – Mount bottom cover

• Step 4 – Thread wires through back opening

• Step 5 – Mount the Cabinet

  • a) Hang the cabinet into mounting bracket Pos. 2
  • b) Center the mirror cabinet over the vanity and fasten it at the lower mounting holes as shown below, by using the anchors (pos.4 or pos.5).

• Step 6 (Connect the Electric Cables)

LIMITED WARRANTY

SIDLER will provide a two-year warranty in respect of defects associated with the Product, commencing from the date of delivery, subject to the following conditions:

1. The Product must have been professionally mounted and installed by a certified licensed contractor by the Safety Standards Act, S.B.C. 2003, c. 39, as amended, and the Electrical Safety Regulation B.C. Reg. 100/2004, as amended.
2. The Product must have been used by the Purchaser in themanner and for the purpose recommended and authorizedby SIDLER and the manufacturer.
3. The Product must not have been modified or changed in design or function following delivery.
4. In each case, written notice by the Purchaser specifying the alleged defects must be received during the warranty period(within two years of the date of delivery).
5. The warranty is limited to replacement parts only.
6. Damages resulting from normal wear and tear are excluded. The determination of whether damage has so resulted will be in the sole discretion of SIDLER.
7. Damages resulting from any errors in representations made by the manufacturer regarding product specifications are excluded.

SIDLER® International Ltd.
Burnaby, BC
CANADA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>