nannio Hero2 Video Baby Monitor User Manual

nannio Hero2 Video Baby Monitor

Congratulation!

• Thanks for your patronage of our products and welcome to Nannio Baby Caring World! You can start to take care of your baby whenever and wherever you want.
• This user manual has all the feature operations and troubleshooting necessary to install and operate your Nannio Baby monitor. Please review this manual thoroughly to ensure proper installation and operation of this product.
• Please keep your purchase order number carefully as this number will be needed when you ask for warranty.
• Before you use the products, please read the safety instructions.

Safety instructions

When using your equipment, basic safety precautions should always be followed.

1. Follow all warnings and instructions marked on the products. Adult setup is required.
2. Water and moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.
3. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replacement, radiator, heat register, stove or other appliance that emits heat. The unit should not be le in direct sunlight.
4. DO NOT: Use the appliance if the cord or plug is damaged. If the product is not operating properly or has suffered any damage, please contact the service center with your order number to ask for help in order to avoid any possible risk.
5. DO NOT: Attempt to repair or adjust any of the electrical or mechanical functions of the unit since, if you do, the warranty will be made void.

WARNING: STRANGULATION HAZARD. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3.5 feet (1 meter) away). Do not remove the tag.

WARNING

WHAT’S IN THE BOX

Please make sure you have the following in the packing.

• 1 x Parent unit
• 1 x Baby unit
• 2 x Power Adapter
• 1 x Wall-Mount Kit
• 1 x Quick Guide

Baby unit

1. Camera
2. Power on light
3. Lullaby on/off button
4. Antenna
5. On/off slide
6. Microphone
7. Speaker
8. Socket for power adapter

Parent unit

1. Display
2. Link
3. Battery status
4. VOX light
5. Speaker
6. Antenna
7. On/off button
8. Mode button
9. Talk-back
10. Lullaby button
11. Socket for power adapter
12. VOX button
13. Control button
14. Microphone

Power on the baby monitor

• Baby unit Connect the power adapter with the baby unit.
• Parent unit Connect the power adaptor with the parent unit.

Note: The parent unit is built-in a rechargeable Li-ion battery.

There are 3 battery status indicators:

• Green light: The battery is fully charged
• Orange light: The appliance is charging
• Red light: The battery is almost empty and the parent unit beeps.

Connect parent unit and baby unit

• Push the on/off switch on the baby unit to the ON position.
  Note: When the baby unit is turned on, the power indicator always lights up in green

• Press the on/off button on the parent unit to turn on the unit.

Automatic connection

• When the parent unit is turned on, it starts to search for the baby unit.
• When the parent unit and baby unit are connected, the connection light on the parent unit becomes green.
• When the baby unit is turned off, the parent unit will show an “out-of-range image”. If you want both products to work properly, please make sure that the baby unit is turned on.

Note: If no connection has been established, the connection light turns red, the parent unit beeps three short beeps every 20 seconds and the out-of- range image appears on the monitor.

Placement of baby monitor

• 2.5m/8.2ft Place the parent unit within the operating range of the baby unit. Make sure it is at least 2.5 meters/8.2 feet away from the baby unit to avoid acoustic feedback.
• 1-1.5m/3-3.5ft Make sure that the distance between the baby unit and the baby is more than 1-1.5 meters/3-3.5 feet, because of potential strangulation hazards.

There are two ways to position the baby unit:

1. Mount the baby unit to the wall with screws. Use the provided template to mark the exact location of the screw holes on the wall.
2. Place the baby unit on a stable, level, and horizontal surface.
   • Tip 1: Adjust the baby unit in a way that ensures the best view of the baby.
   • Tip 2: Put the baby unit in a higher position to get a good overview of the crib or playpen.

Operating range

• The operating range is up to 50 meters/165 feet indoors and 300 meters /985 feet outdoors.
• The operating range of the baby monitor varies depending on the surroundings and the factors causing interference.

Features and settings

Volume

• You can adjust the speaker volume of the parent unit to the level you like.
• Press the top or bottom part of the control button to adjust the volume.
• The volume icon appears on the display to show the selected volume.

Note: When the volume is at its minimum, the volume is muted. The parent unit shows a mute icon on the status bar.

Brightness

You can adjust the brightness of the parent unit to the level you like.

• Press the left and right part of the control button to adjust the brightness of the screen of the parent unit.
• You can see the brightness level on the parent unit.

Operation modes

Video•Audio•VOX With the baby monitor turned on, you can choose 3 different modes by pressing the mode button on the side of the parent unit.

Video Mode

1. Press the mode button on the side of the parent unit to select the VIDEO mode.
2. After enabling the video mode, the screen is always on, so you can see your baby always and all sounds are directly transmitted to the parent unit.

Audio Mode

1. Press the mode button on the side of the parent unit to select the AUDIO mode.
2. When the AUDIO mode is activated, the display of the parent unit becomes black. After 3 seconds, the display will turn off completely and the status bar will disappear.
3. If your baby is crying, the display is still in black, but you can hear the crying of your baby.

VOX Mode

1. Press the mode button on the side of the parent unit to select VOX mode.
2. When the VOX mode is activated, the display and sound of the parent unit are turned off. And the VOX light becomes green
3. When sound is picked up by the baby unit, the display and sound of the parent unit are turned on immediately.
4. If no sound is detected for 20 seconds, the display and sound turn off again.

Soothing lullaby

1. You can activate the lullaby feature from the parent unit or baby unit.

Lullaby

Lullaby selection

1. Press the lullaby button on the parent unit to open the menu for lullabies.

2. Press the right part of the control button to enter the list of lullabies.

3. Press the top or bottom part of the control button to scroll through the list of lullabies.

4. Press the right part of the control button to play a specific lullaby.

5. The status bar of the parent unit shows the number of lullabies that are being played and repeated.
   Tip: To repeat all songs that are available, select the last option in the list.

6. To select another lullaby, scroll up or down with the control button to select another song from the list.

7. To stop the lullaby, press the lullaby button on the parent unit and pause the song that is currently playing by pressing the right part of the control button one more time.

Lullaby volume

1. Press the lullaby button on the parent unit to open the menu for lullabies. Press the left part of the control button and then press the bottom of the control button to select the volume options of the lullaby menu. Press the right part of the control button to access the lullaby volume levels.
2. Press the top or bottom part of the control button to adjust the volume.
3. To stop the lullaby, press the lullaby button on the parent unit and pause the song that is currently playing by pressing the right part of the control button one more time.

• To activate the lullaby feature from the baby unit, press the lullaby on/off button on the baby unit.
• The latest lullaby selected on the parent unit starts to play on the baby unit and is repeated continuously for approximately 15 minutes.

Two-way-talk

Two-way-talk You can use the talk-back sign button on the parent unit to talk to your baby.

1. Press and hold the “ talk-back ” button
2. Speak clearly within a distance of 15-30 cm/0.5-1 ft.
3. While talking, you can see the “ talk-back ” on the monitor

Note: When the “ talk-back ” button is pressed, the parent unit cannot process sounds coming from the baby unit.

Voice activation (sensitivity)

Voice Activation The sensitivity level of the baby unit defines what you hear through the parent unit. When the level is set high, you will hear many sounds, including soft background sounds. When the sensitivity level is set low, you will hear only the louder sounds.

• Press the sensitivity button to access the sensitivity levels.

Note: When pressing the sensitivity button again, you will leave the menu.

• Press the top or bottom part of the control button to select the desired sensitivity level. If your baby only makes soft sounds, the sensitivity of the baby unit needs to be set to a high sensitivity level on the parent unit.

Note: The louder your baby sounds, the lower the sensitivity can be set on the parent unit.

Note： In AUDIO and VIDEO mode, you will have continuous sound when the sensitivity level is ‘very high’. Otherwise, low sounds will be muted.

Technical specifications

Baby unit

Parent unit

System

Wall mount

• Printing instructions: Print this page in scale 100 % and use the template to accurately mark the position of the holes for the screws on the wall.

FREQUENTLY ASKED QUESTIONS

What is the purpose of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor is designed to provide parents with real- time video and audio monitoring of their baby to ensure their safety and well- being.

What is the power source for the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor is powered by a battery pack, making it convenient for use in various locations without the need for constant charging.

What connectivity protocol does the nannio Hero2 Video Baby Monitor use?

The nannio Hero2 Video Baby Monitor utilizes Wi-Fi connectivity protocol, enabling users to access live video feeds remotely via compatible devices.

What type of controller does the nannio Hero2 Video Baby Monitor support?

The nannio Hero2 Video Baby Monitor supports Amazon Alexa as its controller type, allowing users to control the monitor using voice commands.

What is the video capture resolution of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor captures video in 720p resolution, providing clear and detailed footage of your baby.

What is included in the package of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor comes with a battery pack as its included component, ensuring continuous operation even when not connected to a power source.

What is the form factor of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor has a box-shaped form factor, providing stability and durability for placement in the baby's nursery.

What is the voltage requirement for the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor operates at 5 volts, ensuring efficient and safe performance.

What is the focus type of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor features auto-focus technology, ensuring clear and sharp images of your baby.

Does the nannio Hero2 Video Baby Monitor have low-light technology?

Yes, the nannio Hero2 Video Baby Monitor is equipped with night color low- light technology, allowing for clear visibility even in dimly lit environments.

What alert type does the nannio Hero2 Video Baby Monitor provide for out-of- range situations?

The nannio Hero2 Video Baby Monitor provides out-of-range alerts, ensuring that parents are notified if they move beyond the monitor's range.

What is the light source type used in the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor utilizes infrared light source technology for night vision capability, providing clear video footage even in darkness.

In what video capture format does the nannio Hero2 Video Baby Monitor record video?

The nannio Hero2 Video Baby Monitor records video in MPEG-4 format, ensuring compatibility with various devices for playback and storage.

What are the specific uses for the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor is specifically designed for use as a baby monitor, in baby nurseries, and for ensuring child safety.

What is the international protection rating of the nannio Hero2 Video Baby Monitor?

The nannio Hero2 Video Baby Monitor has an IP65 international protection rating, indicating resistance to dust and water ingress, making it suitable for use in various environments.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: nannio Hero2 Video Baby Monitor User Manual

REFERENCE:nannio Hero2 Video Baby Monitor User Manual- Device.Report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>