nannio HERO3 Baby Monitor User Manual

HERO3 Baby Monitor
User Manual

Congratulation!
Thanks for your patronage of our products and welcome to nannies Baby Caring World! You can start to take care of your baby whenever and wherever you want.
This user manual has all the feature operations and troubleshooting necessary to install and operate your nanny Baby monitor. Please review this manual thoroughly to ensure the proper installation and operation of this product.
Please keep your purchase order number carefully as this number will be needed when you ask for a warranty.
Before you use the products, please read the safety instructions.

Safety instructions

When using your equipment, basic safety precautions should always be followed.

1. Follow all warnings and instructions marked on the products.
2. Adult setup is required.
3. Water and moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping, or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.
4. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replacement, radiator, heat register, stove, or other appliance that emits heat. The unit should not be le in direct sunlight.
5. DO NOT: Use the appliance if the cord or plug is damaged. If the product is not operating properly or has suffered any damage, please contact the service center with your order number to ask for help in order to avoid any possible risk.
6. DO NOT: Attempt to repair or adjust any of the electrical or mechanical functions of the unit since, if you do, the warranty will be made void.

WARNING: STRANGULATION HAZARD. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3.5 feet (1 meter) away). Do not remove the tag.

Please make sure you have the following in the packing.
1 x Parent unit
1 x Baby unit
2 x Power Adapter
1 x Wall-Mount Kit
1 x Quick Guide

Baby unit

Parent unit

Power on the baby monitor

Note: The parent unit is built in a rechargeable Li-ion battery.

There are 3 battery status indicators:

Greenlight: The battery is fully charged
Orange light: The appliance is charging
Red light: The battery is almost empty and the parent unit beeps.

Connect parent unit and baby unit

Note: When the baby unit is turned on, The power indicator always lights up in green

Automatic connection
When the parent unit is turned on, it starts to search for the baby unit.

When the parent unit and baby unit are connected, the connection light on the parent unit becomes green.

When the baby unit is turned off, the parent unit will show an “out-of-range image”. If you want both products to work properly, please make sure that the baby unit is turned on.

Note: If no connection has been established, the connection light turns red, the parent unit beeps three short beeps every 20 seconds and the out-of-range image appears on the monitor

Placement of baby monitor

Place the parent unit within the operating range of the baby unit. Make sure it is at least 2.5 meters/8.2 feet away from the baby unit to avoid acoustic feedback.

Make sure that the distance between the baby unit and the baby is more than 1-1.5 meters/3-3.5 feet, because of potential strangulation hazards.

There are two ways to position the baby unit:

1. Mount the baby unit to the wall with screws. Use the provided template to mark the exact location of the screw holes on the wall.
2. Place the baby unit on a stable, level, and horizontal surface.
   Tip 1: Adjust the baby unit in a way that ensures the best view of the baby.
   Tip 2:Put the baby unit at a higher position to get a good overview of the crib or playpen.

Operating range
The operating range is up to 50 meters/165 feet indoors and 300 meters /985 feet outdoors.
The operating range of the baby monitor varies depending on the surroundings and the factors causing interference.

Features and settings

Volume
You can adjust the speaker volume of the parent unit to the level you like.

1. Press the top or bottom part of the control button to adjust the volume.
2. The volume icon appears on the display to show the selected volume.

Note: When the volume is at its minimum, the volume is muted. The parent unit shows a mute icon on the status bar.

Brightness

You can adjust the brightness of the parent unit to the level you like.

1. Press the left and right parts of the control button to adjust the brightness of the screen of the parent unit.
2. You can see the brightness level on the parent unit.

Operation modes

With the baby monitor turned on, you can choose 3 different modes by pressing the mode button on the side of the parent unit.
Video Mode

1. Press the mode button on the side of the parent unit to select the VIDEO mode.
2. After enabling the video mode, the screen is always on, so you can see your baby always and all sounds are directly transmitted to the parent unit.

Audio Mode

1. Press the mode button on the side of the parent unit to select the AUDIO mode.
2. When the AUDIO mode is activated, the display of the parent unit becomes black. After 3 seconds, the display will turn off completely and the status bar will disappear.
3. If your baby is crying, the display is still in black, but you can hear the crying of your baby.

VOX Mode

1. Press the mode button on the side of the parent unit to select VOX mode.
2. When the VOX mode is activated, the display and sound of the parent unit are turned off. And the VOX light becomes green
3. When sound is picked up by the baby unit, the display and sound of the parent unit are turned on immediately.
4. If no sound is detected for 20 seconds, the display and sound turn off again.

Night light

Press the night light on/off on the baby unit to turn on the night light feature.
Note: The night light cannot be controlled from the parent unit. You can only turn on or off the night light on the baby unit.

Soothing lullaby

You can activate the lullaby feature from the parent unit or baby unit.

Two-way-talk

Talk-back
You can use the Talk-back button on the parent unit to talk to your baby.

1. Press and hold the “Talk-back” button
2. Speak clearly within a distance of 15-30 cm/0.5-1 ft.
3. While talking, you can see the “Talk-back” on the monitor

Note: When the “Talk-back” button is pressed, the parent unit cannot process sounds coming from the baby unit.

Menu features

Volume
All features described in the following sections can be operated through the menu of the parent unit.

1. Press the menu button to enter the menu.
2. Use the control button to navigate through the menu.
   Tip 1: Press to choose the functions you want.
   Tip 2: Use to go back.

Note: When you press the menu button again, you will leave the menu. Or, if you are in the menu but do not press any buttons for 5 seconds, the menu will exit without saving the changed settings.

Zoom (Digital Pan&Tilt)

1. Press button.

2. Choose the zoom icon and push the icon and choose on.

3. Then you can use it to pan and tilt to the position you want.
   Tip: You can use the top/bottom/right/left part of the control button to choose what image will be shown on the parent unit.

4. Press the menu button to save the new setting. The image is automatically saved after 5 seconds.

5. Go to the zoom menu and turn off the zoom function, if you want to zoom out the image.

Voice Activation (Sensitivity)

Voice Activation (Sensitivity)
The sensitivity level of the baby unit defines what you hear through the parent unit. When the level is set high, you will hear many sounds, including soft background sounds. When the sensitivity level is set low, you will hear only the louder sounds.

Press the left part of the control button to save the new setting and to return to the main menu.
Note： In AUDIO and VIDEO mode, you will have continuous sound when the sensitivity level is ‘very high’. Otherwise, low sounds will be muted.

Press the right part of the control button to access the sensitivity levels.
Press the top or bottom part of the control button to select the desired sensitivity level.
Note： If your baby only makes soft sounds, the sensitivity of the baby unit needs to be set to a high sensitivity level on the parent unit.

Vibration

1. Press the right part of the control button to access the vibration options.
   There are 3 options for vibration:
   On When the parent unit is muted- when the volume is set to a minimum (muted) the parent unit will vibrate when sound is detected from the baby ON unit Always on- parent unit will always vibrate when sound is detected from the baby unit and above sensitivity level.
   OFF The off-parent unit will never vibrate.
   When vibration is on, the parent unit will vibrate when your baby cries or makes sounds, according to the sensitivity level you have selected.
   The parent unit also vibrates when the temperature alert is on and a maximum or minimum temperature is reached or when the parent unit lost connection with the baby unit.

2. Press the left part of the control button to save the new setting and to return to the main menu.

Temperature setting

The temperature sensor enables you to onitor the temperature in your baby’s room.
Note: The current temperature in your baby’s room is shown in the status bar of the parent unit.

1. Press the right part of the control button to access the temperature options.
   Tip: You can change the temperature unit from °F to °C by selecting the unit option.

2. In the temperature menu, an alert for temperature can be set on or off.

3. You can select the alert option to turn on the alert. To change the maximum and minimum temperatures for the temperature alert, select the desired temperatures at ‘ ’ and ‘ ’ in the temperature menu.
   

4. Press the left part of the control button to save the new setting and to return to the main menu.

5. The parent unit shows this alert when chosen temperatures are measured or exceeded.

Technical Specifications

Baby unit

Parent unit

System

Wall mount

Printing instructions:
Print this page in scale 100 % and use the template to accurately mark the position of the holes for the screws on the wall.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>