milwaukee M18 CV Cordless Compact Hand Vac Instruction Manual

milwaukee M18 CV Cordless Compact Hand Vac

TECHNICAL DATA

… 000001-999999
Battery voltage| 18 V
Power input| 12 A
Power consumption| 216 W
Flow rate max.| 1019 l/min
61 m3/h
Underpressure max.| ≥ 9,4 kPa
≥ 94,0 mbar
Capacity Container / Solid| 1,35 / 1,1 l
Filter surface| 750 cm²
Safety class (Moisture, Dust)| IP 44
Weight according EPTA-Procedure 01/2014 (Li-Ion 4,0 Ah)| 1,9 kg
Noise information
The noise level when working ≤ 83.0 dB (A). Wear ear protectors!
Vibration information
Vibration emission value ah| ≤1,99 m/s2

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY WARNINGS DUST EXTRACTION

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.

Fire and explosion hazard!
Never suck up into the machine any inflammable or explosive solvents, or liquids like petrol, oil, alcohol, thinners, or small particles (such as metal filings or ash) that may be  hotter than 60°C – otherwise there is danger ofexplosion or fire!
You are not allowed to use the appliance in the vicinity of inflammable gases or substances.
Do not point the nozzle, hose or tube at people or animals.

SPECIFIED CONDITIONS OF USE

The vacuum cleaners described in this operating manual are suitable for
• sucking up dust and liquids
• commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices and rental businesses.

The following materials should not be picked up by the vacuum cleaner
• hazardous dust
• hot materials (burning cigarettes, hot ash, etc.)
• flammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.)
• flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)
Any national regulations in this regard must be complied with

BATTERIES

Use only System M18 chargers for charging System M18 battery packs. Do not use battery packs from other systems.
Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after use.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% – 50% charged condition Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION

In extremely high torque, binding, stalling and short circuit situations that cause high current draw, the tool will vibrate for about 2 seconds, the fuel gauge will flash,and then the tool will turn OFF.
To reset, release the trigger.
Under extreme circumstances, the internal temperature of the battery pack could raise too much. If this happens, the fuel gauge will flash until the battery pack cooled down. After the lights go off, the work may continue.
Place the battery on the charger to charge and reset it.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions and regulations.
The user can transport the batteries by road without further requirements.
Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
Ensure that battery contact terminals are protected and insulated to prevent short circuit. Ensure that battery pack is secured against movement within packaging. Do not transport batteries that are cracked or leak. Check with forwarding company for further advice

WORKING INSTRUCTIONS

Not suitable for sweeping up liquids which form a large foam.
Only use the appliance if it is in perfect condition. Never use the dust extractor without a filter, or if the filter is damaged.
Discard filter elements, filter bags and disposal bags in accordance with the national regulations.

MAINTENANCE, CLEANING AND REPAIR

Only carry out maintenance work described in the operating instructions.
The ventilation slots of the machine must be kept clear at all times.
Clean dust and debris from tool. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Never use flammable or combustible solvents around tools.
Never spray water on to the upper section of the vacuum cleaner.
Danger for persons, risk or short-circuiting.
Before use check machine, cable, and plug for any damages or material fatigue. Repairs should only be carried out by authorised Service Agents.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the Article No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at:

Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
Storage: The appliance must be stored in a dry place and protected from frost.

• For user servicing, the machine must be dismantled, cleaned and serviced, as far as is reasonably practicable, without causing risk to the maintenance staff and others. Suitable precautions include decontamination before dismantling, provision for local filteredexhaust ventilation where the machine is dismantled, cleaning of the maintenance area and suitable personal protection.
• The manufacturer, or an instructed person, shall perform a technical inspection at least annually, consisting of, for example, inspection of filters for damage, air tightness of the machine and proper function of the control mechanism.

SYMBOLS

| CAUTION! WARNING! DANGER!
---|---
| Remove the battery pack before starting any work on the appliance.
| Please read the instructions carefully before starting the machine.
| Provide adequate ventilation.
| Accessory – Not included in standard equipment, available as an accessory.
| Do not dispose of electric tools together with household waste material.Electric tools and electronic equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.Check with your local authority or retailer for recycling advice and collection point.
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark

Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
+49 )0( 7195-12-0
www.milwaukeetool.eu

Techtronic Industries )UK( Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ
UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>