Chuting Technology Shenzhen Co LTD 2BFNO-H2Q Smart Eyewear User Guide

SMART EYEWEAR
FASHION SUNGLASSES X TWS BLUETOOTH HEADSET
H2Q tAigirn Quick Start Guide

Shenzhen Co LTD 2BFNO-H2Q Smart Eyewear

Power on: please long press the button on the left and right leg for 2 seconds, the smart glasses power on and sound a prompt sound effect. Power off: please long press the button on the left or right leg for 4 seconds. the smart glasses shut down and sound a pt sound effect. )

1. Turn on glasses, open the phone’s Bluetooth, and search the name of Smart eyewear, the device Is connected.

2. After successfully connecting, then prompt sound effect sound.

3. When the device disconnect, then prompt sound effect sound.

4. Short press button on the ie I or right leg or answering or hanging up cans.

5. Long press button on the loft or right log fort second for refusing calls.

6. The cense: Bath: on from glasses to receiver, long press button on the left or right leg for I second. wart mu tot

7. Click button on the left or right leg to play or pause music.

8. Double click button on the left leg to decrease the volume.

9. Click 3 times button on the left leg to play the last music.

10. Double click button on the right leg to Increase the volume.

11. Click 3 times button on the right leg to play the next music.

Standby or listening music, long press button on the left or right leg for 2 seconds to activate or deactivate the voice assistant.

1. When there Is no activity for 5 minutes, the glasses turning itself off.
2. During charging, the red LED long bright.
3. When charging is completed, the light display turn off.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>