Metra Electronics TE-WMCE Digital Wireless Camera and Monitor Instructions

June 6, 2024
Metra Electronics

Heavy Duty Digital 2.4Ghz
the wireless video camera system

Key instruction:

  1. Menu key enter to the menu set, also quit from sub-menu.
  2. After you pair the camera, the fast channel key can help you select the camera channel, etc.
  3. The left key is the parking line key, press can display parking or not display.

4. For the paring, one set we had paired well for you; if you need to change, please press the menu pairing key, and press the camera pairing button at the camera end. This camera pairing key can make it more available to do pair operations.
Menu screen: Press “MENU” enter to menu screen as Image 1

Detail features:

  1. Color,brightness,contrast;each channel can be set;as following image2
    showed:

  2. Image turn: up/down/mirror/normal images; Press the “ok” key to turn.

  3. this is the memory, time set,50/60HZ, default setting: Press move “left”, “right” key to select, and “ok” key confirm.
    50Hz&60Hz;| Default set;| Time set;| SD format
    ---|---|---|---

Note: the first time use the SD card, please do SD card format,

  1. Paring:
    When you need to change the camera or trailer etc, need to do paring again; Method is to press the menu
    Select the paring, and then press “ok” have the following image 4, and then press the camera end pairing key. We update this as this is more available for pairing, to make
    sure pairing ok and paired that camera you want to pair.
    This is the pairing, press the “ok” key to select and confirm when there have
    “√” Then paired ok.

  2. This is dis paring, press “ok” key to select, to disconnect the paired camera.

  3. Video playback, the press plays back key fast enter to the playback menu.

  4. Video recording, or take picture set: from select the first one:cycle recording power one start recording; manual recording, select the second one, press “+” start or stop  video recording; the fourth is the taking picture, press“+” to take pictures

Detail specification:

Digital Wireless Receiver Monitor

Digital Wireless Waterproof IR Camera
Image Type: 1/3 inch Color CMOS HD 720P
Built-in 2.4GHz Digital wireless transmitter
Line of Sight Range:≤100M
Horizontal Resolution:1200TV Lines
Effective pixel:1280(H)X720(V)
Usable Illumination: 0Lux ( Built-in 18pcs IR LEDs for Picture Support in the Dark)
Free viewing angle: 120°
Waterproof: IP69K
Shockproof: 10G
Free Operating Voltage: DC10-32 Volts
Dimensions: 80(L) x 70(W) x 77(H) mm (with mounting)
Weight: 450g
Accessories
U- Support Bracket、Angle Adjustment Screw2、Removable Sun Visor1、Electrical Connecting
Cable1、Antenna2、Stainless steel Screw 2、User’s Manual1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals