MAYNE 4828 Nantucket Corbels Instructions
- June 9, 2024
- MAYNE
Table of Contents
MAYNE 4828 Nantucket Corbels
PACKAGE CONTENTS
2x Decorative Supports, 4x 1 inch steel screws
DIMENSIONS
3.9″ W x 8″D x 7″ H
IMPORTANT NOTE
- The molded corbels are decorative only and don’t offer any support for the planter.
General Information
- Read instructions carefully before beginning assembly.
- For use with Mayne’s Nantucket Window Box collection.
- To clean the product, for best results use a soap solution and high-pressure water.
Secure each decorative corbels to the bottom of the wall mount brackets using two 1 inch screws. The decorative corbels are sold in pairs so we recommend installing them on the outside brackets as shown above.
The front lip of the wall mount bracket should sit flush against the inside face of the decorative corbel (indicated by the arrow). The molded corbels are only decorative so there is no need to over tighten the screws.
Customer Support
In the event of missing or defective parts, please emailcustomerservice@gomayne.com or call our customer service department toll free at 866-363-8834 (available Monday through Friday, 8am-5pm EST).
Outdoor Products of Distinction
gomayne.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>