Shark HD430 FlexStyle Build Air Styling Hair Drying System Instruction Manual

: June 1, 2024
: Shark

Table of Contents

Shark HD430 FlexStyle Build Air Styling Hair Drying System
IMPORTANT SAFETY INSTRUCTIONS
TECHNICAL SPECIFICATIONS
GUARANTEE
OPERATING INSTRUCTIONS
TROUBLESHOOTING & ERROR CODES
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark HD430 FlexStyle Build Air Styling Hair Drying System

Shark-HD430-FlexStyle-Build-Air-Styling-Hair-Drying-System-
PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

WARNING—To reduce the risk of death by electric shock:

Always unplug the unit immediately after using it.
Do not use it while bathing.
Do not place or store appliances where they can fall or be pulled into a bath or sink.
Do not place in or drop into water or other liquid.
If an appliance falls into the water, unplug it immediately before removing the unit. Do not reach into the water.
WARNING—To reduce the risk of burns, electrocution, fire or injury to persons:
An appliance should never be left unattended when plugged in. When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Use this appliance only for its intended use as described in this manual.
Only the use of Shark attachments is allowed for the safe use of the product.
Never operate this appliance if it has a damaged cord or plugs if it is not working properly or if it has been dropped, damaged or dropped into water. Contact Shark customer service for examination and repair.
Keep the cord away from heated surfaces.
Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or sofa, where the air openings may be blocked. Keep the air openings free of lint, hair and the like.
Never use it on someone who is sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
Do not direct hot air toward eyes or other heat-sensitive areas.
Attachments may be hot during use.
Allow them to cool before handling.
Do not place the appliance on any surface while it is operating.
While using the appliance, keep your hair away from the air inlets.
Do not operate with a voltage converter.
Do not use this appliance on hair extensions or wigs unless recommended by the hair extension or wig manufacturer.
If a hair styling product is being used in conjunction with this appliance please read and follow all of the hair styling product safety warnings and instructions before use.

TECHNICAL SPECIFICATIONS

Voltage: 220V-240V, 50-60Hz, 1650W

GUARANTEE

TWO (2) YEAR LIMITED GUARANTEE

When a consumer buys a product in Europe, they get the benefit of legal rights relating to the quality of the product (your statutory rights). You can enforce these rights against your retailer. However, at Shark® we are so confident about the quality of our products that we give you an additional manufacturer’s guarantee of two years These terms and conditions relate to our manufacturer’s guarantee only – your statutory rights are unaffected. The conditions below describe the prerequisites and scope of our guarantee. They do not affect your statutory rights or the obligations of your retailer and your contract with them.

Shark® Guarantees
Your Shark unit constitutes a sizeable investment. Your new hairdryer needs to work properly for as long as possible. The guarantee it comes with is an important consideration – and reflects how much confidence the manufacturer has in its product and manufacturing quality. Every Shark machine comes with free parts and a labour guarantee. Our customer service helpline (0800 862 0453) is open from 9.00 am to 6.00 pm Monday – Friday. It’s free to call and you’ll be put straight through to a Shark representative. You’ll also find online support at sharkclean.eu.

How do I register my Shark guarantee?

You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your hairdryer:
Date you purchased the unit (receipt or delivery note).
To register online, please visit sharkclean.eu.

IMPORTANT

The guarantee will only cover your product from the date of purchase.
Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is correct. The inability to produce a valid receipt may invalidate your guarantee.

What are the benefits of registering my free Shark guarantee?

When you register your guarantee we’ll have your details to hand if we ever need to get in touch.
You can also receive tips and advice on how to get the best out of your Shark unit and hear the latest news about new Shark® technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.

How long are new Shark machines guaranteed for?

Our confidence in our design and quality control means that your new Shark unit is guaranteed for a total of two years.

What is covered by the free Shark guarantee?

Repair or replacement of your Shark machine (at Shark’s discretion), including all parts and labour. A Shark guarantee is in addition to your legal rights as a consumer.

What is not covered by the free Shark guarantee?

Normal wear and tear of wearable parts (such as accessories). Replacement parts are available for purchase at sharkclean.eu.
Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance or damage due to mishandling in transit.
Damage caused by maintenance not authorised by Shark.

What happens when my guarantee runs out?

Shark does not design products to last for a limited time.
We do appreciate that there may be a desire for our customers to want to repair their unit after the guarantee has lapsed. In this case please contact our customer service helpline and ask about our out-of-guarantee repair program, on 0800 862 0453.

Where can I buy genuine Shark spares and accessories?

Shark spares and accessories are developed by the same engineers who developed your Shark unit.
You’ll find a full range of Shark spares and replacement parts/accessories for all Shark machines at sharkclean.eu.
Please remember that damage caused by the use of non-Shark spares may not be covered under your guarantee.

OPERATING INSTRUCTIONS

Turns the styler on and off.
Adjusts the airflow. Pressing the button allows you to choose a low, medium, or high airflow.
Adjusts the temperature. Pressing the button allows you to choose no heat, low, medium or high temperature.
Press and hold the Cool Shot button for a cool burst of air to set your style.
To attach any accessories included with your model, press them into the nozzle outlet. You will know they are properly attached when they click in place.
To remove any accessories included in your model, slide the lockdown and lift the accessory off of the nozzle by holding onto the touchpoints identified in your Style Guide.
To change from styling wand mode to hair dryer mode, slide down the lock and rotate the nozzle left.

Keep rotating the nozzle until it clicks into place in hair dryer mode. To change from hair dryer mode to styling wand mode, slide down the lock and rotate the nozzle right.

Shark-HD430-FlexStyle-Build-Air-Styling-Hair-Drying-System-
FIG-1

For further operating instructions, please consult the Styling Guide

Storage, Cord Safety, and Maintenance/Cleaning

Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
Store the unit in a dry location away from water and other heat sources.
Regularly clean the filter at the bottom of the unit.

To clean the filter, first slide the filter cover off the bottom of the unit. Then use a new toothbrush to brush off any dust or debris on the filter. Once the filter is clean, slide the filter cover back onto the unit until it clicks in place.

TROUBLESHOOTING & ERROR CODES

MAINTENANCE/CLEANING

Reduction in Airflow, Overheating
A change in airflow or air power, airflow blockages, and/or visible buildup on the inlet at the bottom of the unit indicates your unit needs to be cleaned. We recommend using a new toothbrush to clean off the filter at the bottom of the unit.

OVERHEATING

Hair dryer is overheating or shuts off.
This unit is equipped with a temperature-protective thermostat. If for some reason your hair dryer overheats, the thermostat will automatically turn the unit off. To prevent a power-down recurrence, unplug the hair dryer and set it aside to cool, or cool down using the cool shot button during use. Overheating may result if the unit is powered on for a long duration, or can indicate a blockage or dust buildup.
We recommend using a new toothbrush to clean off the filter at the bottom of the unit. If overheating continues to occur, contact Customer Service at 0800 862 0453.

Overheating Error Code