FOOCCA 35000 Electric Nail File Instruction Manual

Handleiding

Thank you for choosing FOOCCA! You can find the digital manual at foocca.com/manual.

Important Safety Instructions

Read all instructions before using the device.
Follow safety instructions to reduce the risk of burns, electrocution, fire, or injury and to prevent potential hazards that can lead to personal injury or damage to the device.

Check Before Use

1. Check the power supply before using the device for the first time and throughout its lifespan. Do not use the device if it is damaged or not functioning properly.
2. Do not connect the device to a voltage system that is not specified for this device or the charger. Incorrect voltage will damage the device and void the warranty.
3. Use only the original USB cable.

Directions for Use

1. To avoid electrical leakage and shocks, do not pull on the connection wires during use and do not touch the plug with wet hands. Turn off the device after use.
2. Do not use bent or damaged bits and do not change the bits when the device is turned on.
3. Do not adjust the speed abruptly. Stop immediately if unusual movements or sounds occur.
4. Incorrect use, dropping, or applying excessive force can damage the device.
5. Minors should not use this device without parental permission and supervision.

Specifications

Power Controller Section
Input: DC 5V/2A
DC Output: 12V/1A
Maximum Power: 12W
Battery Capacity: 4000mAh
Nail Drill Pen (Motor) Part
Rated Voltage: DC/12V
Rated Current: 250mA
No-Load Speed: 35000 RPM

1. Connect the USB charging cable to the charging block to charge the power controller for 2-3 hours (5V/2A) until the lights stop flashing.

2. Turn the Twist & Lock wheel to the left and insert the desired bit. Turn it to the right to secure the bit.

3. Use the DC cable to connect both parts. The holder for the nail drill pen is inserted on the side of the power controller and can be used on both sides.

4. Turn on the device. Use the dial to adjust the speed. Press the dial to pause. Use the direction button to change the rotation direction.

5. Ready for use.

The different bits and their applications
Below are images of the anatomy of the nail and the various bits. Relate these names to each other to select the right bit. For difficult-to-remove surfaces, such as acrylic nails, it is recommended to use the mandrel bit in combination with sanding rolls.

Bits for removing calluses

When removing calluses, it is important to use the right bits to ensure a safe and effective treatment. Refer to the previous page to find out what the terms below refer to.

1. Editing bits: These bits are specifically designed to treat hard and thickened skin, such as stubborn calluses. They effectively grind away the callus without damaging healthy skin.
2.  Sanding and scrubbing bit: These bits have a rough surface and are ideal for grinding away thick layers of callus. They can be used on both dry and moist skin.
3. Mandrel bit with sanding rolls: For very stubborn calluses, you can use the sanding rolls in combination with the mandrel bit. This ensures a thorough treatment of the callus spots.
4. Polishing and cleaning bits: After grinding away the callus, you can use these bits to make the skin smooth and soft, resulting in a finished and well-cared-for appearance.

During the treatment, it is essential to proceed carefully and regularly adjust the pressure and speed to prevent irritation or injury.

Maintenance

1. Do not disassemble the device. This can be dangerous and may void the warranty.
2. Do not store the device in a metal box, car, or other places with high temperatures (more than 50°C). Keep the handpiece away from oil and grease.
3. Do not store the device in a warm or humid environment. Keep it in a cool and dry place.
4. Keep the electrical cord away from hot surfaces.
5. Do not dispose of the device in heat or fire.
6.  Do not clean the device with harmful chemicals or cleaners.

Warranty

FOOCCA offers a limited 1-year warranty on quality-related issues. Please register for your additional 6-month warranty extension by registering within 20 days of purchase at www.foocca.com/warrantyen.

Customer Service
If you have questions or need help with your nail drill, we are here to support you. You can contact us in several ways:
WhatsApp: For direct communication, you can send us a message via WhatsApp. Add our number +31627470687 to your contacts and send us your question.
Email: Send your questions or comments to our email address [email protected].
Phone: If you prefer personal contact, please call us at +31627470687 or at +31208932931.

FOOCCA
Blauwe Oven 2
5951 DR Belfeld
The Netherlands
[email protected]
+31 627470687
+31 208932931

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>